Effects of four multi-compound freezing medium on the quality of red drum (Sciaenops ocellatus) during frozen storage

Taking air freezing (AF) as the reference, the effects of four types of multi-compound freezing medium for cryogenic liquid quick-freezing (immersion freezing, IF) on the freezing rate, quality and myofibrillar protein (MP) denaturation of red drum (Sciaenops ocellatus) fillets during frozen storage (−18°C) from days 0 to 90 were studied. Samples were gathered on days 0, 15, 30, 45, 60 and 90 for analysis. The results showed that IF groups (IF-1: 20% ethanol, 30% propylene glycol, 10% sodium chloride aqueous solution; IF-2: 20% ethanol, 20% propylene glycol, 10% glycerol, 10% sodium chloride aqueous solution; IF-3: 20% ethanol, 20% propylene glycol, 10% polyethylene glycol, 10% sodium chloride aqueous solution; IF-4: 20% ethanol, 20% propylene glycol, 5% glycerol, 5% polyethylene glycol, 10% sodium chloride aqueous solution) significantly shortened the time to cross the formation zone of maximum ice crystals while the freezing rate was 6.13 times higher than the AF group after adding 30% propylene glycol as the freezing medium. Furthermore, compared with the AF group, the IF groups significantly reduced losses in the water-holding capacity, the myofibrillar fragmentation index, microstructure damage, texture characteristics, drip loss and water migration (P < 0.05). In addition, the MP of IF groups had higher maximum transition temperatures (T_max1 and T_max2), total sulfhydryl content, Ca²⁺-ATPase activity and relative α-helix content compared with the AF group. In conclusion, IF could significantly increase the freezing rate of red drum fillets, and slow down quality deterioration and denaturation of MP during frozen storage for 90 days (−18°C). In particular, IF-2 (20% ethanol, 20% propylene glycol, 10% glycerol, 10% sodium chloride aqueous solution) was found to be more suitable for the immersion freezing of marine fish among the four multi-compound freezing medium.     

Transition from random packing to stable state in a continuously avalanching granular flow

We investigate the transition evolution from the initial state with the random packing of the particles to the stable state in which successive avalanches exhibit consistent characteristics under the slumping regime. It is found that there exist three distinct stages in the transition evolution, considering the change of the volume fraction. The coordination number is almost unchanged during the transition evolution, which indicates the particle contact form is consistent in the three stages. The pause phenomena are discovered in some avalanches, and the probability of pause occurrence increases continuously in the three consecutive stages. We also explore the distribution of particles in the passive layer at the stable state. The particles in the middle region of the passive layer have the closest packing status, and the deeper the region is located, the later it reaches the stable state.     

基于TRIZ理论滤咀排列鼓工装夹具优化设计

针对滤咀排列鼓工装夹具所存在的制造难度大,精度难于保证,效率低的问题。利用TRIZ理论进行分析,根据技术矛盾解决方法并结合问题的实际情况,获得了具体可行的解决方案。经过实践证明,此设计方案是可行的、可靠的,大大缩短了夹具的加工周期,提高了生产效率,节约了成本。     

带式输送机驱动滚筒的有限元分析

针对带式输送机驱动滚筒轴向受力情况,提出了正态分布模型,结合ANSYS-APDL的语言编辑能力,用ANSYS Workbench对均匀分布、一阶正弦分布和正态分布的4种模型进行有限元分析,得到驱动滚筒应力应变图及位移变形的对比情况,为日后实验验证与优化设计提供理论支持。     

Machining accuracy improvement for a dual-spindle ultra-precision drum roll lathe based on geometric error analysis and calibration

This paper performs a comprehensive analysis and calibration on the geometric error of the ultra-precision drum roll lathe with dual-spindle symmetrical structure and cross slider layout. Firstly, the volumetric error model which contains all geometric errors of the dual-spindle ultra-precision drum roll lathe (DSUPDRL) is developed based on the combination of the homogenous transfer matrix (HTM) and multi-body system (MBS) theory. Secondly, sensitivity analysis for the volumetric error model is conducted to identify the sensitive geometric error components of the DSUPDRL using an improved Sobol method based on the quasi-Monte Carlo algorithm. The result of sensitivity analysis laid the foundation for the subsequent geometric error calibration. Then, some sensitive error components along the X and Z directions are calibrated using a laser interferometer and a pair of inductance displacement probes. Besides the volumetric error model, the concentricity error caused by dual-spindle symmetrical structure is proposed and calibrated by the on-machine measurement using a classic reversal method. Finally, a large-scale roller mold with a diameter of 250 mm and a length of 600 mm is machined using the DSUPDRL after calibration. The experimental result shows that 1.4 μm/600 mm generatrix accuracy is obtained, which validate the effectiveness of the geometric error analysis and calibration.     

外磁式磁选机应用于铁矿预选抛尾工艺的试验研究

外磁式磁选机已成功应用于-10mm钒钛磁铁矿磨前预选作业,具有回收率高、尾矿品位低等优点。采用外磁式磁选机进行了-18mm钒钛磁铁矿预选抛尾、一段分级系统沉砂抛尾试验研究,可实现抛尾产率9%～28%;采用外磁磁选机进行含弱磁性矿物混合型铁矿预选试验,分析了入选粒度、弱磁性矿物含量对于预选指标的影响;采用外磁式磁选机对-18mm原生磁铁矿进行了预选试验,实现磨前抛废42.09%。     

废树脂微波处理工艺研究

废树脂微波处理工艺主要利用微波的穿透能力强和体加热的特点,首先将废树脂中的水分除去,然后将废树脂中的有机组分去除,从而达到有机废物无机化的目的。与原始废树脂相比,微波干燥、灰化处理后,得到的灰分减容和减重比均极大。利用该技术处理得到的产物,可以方便的进行后续处理。通过研究,确定了废树脂微波桶内干燥及废树脂微波灰化工艺参数。     

MG410采煤机滚筒辅助叶片板的增设与应用

针对MG170/410-WD滚筒式采煤机在大倾角、仰角、“三软”煤层使用中遗漏在机道中的浮煤多、装煤效率低等问题,通过添加螺旋板数量对采煤机滚筒进行改造。改造后,在滚筒转速不变的情况下,提高抛煤效率,缩短了工作面割煤和工作面空顶时间,提高了装煤效率,从源头上降低了顶板管理的安全风险。     

焦炭塔典型损伤模式分析

阐述了焦炭塔常见损伤模式及其发生机理、主要表征、影响因素及控制措施。针对具体检验案例,分析了缺陷产生原因,对检验人员及使用单位如何做好焦炭塔的检维修工作提出了建议。     

浅谈皮带输送机的节能系统

介绍了皮带输送机的节能系统并简述其运行原理。