A scalable architecture for geometric correction of multi-projector display systems

Multi-projector displays allow the realization of large and immersive projection environments by allowing the tiling of projections from multiple projectors. Such tiled displays require real time geometrical warping of the content that is being projected from each projector. This geometrical warping is a computationally intensive operation and is typically applied using high-end graphics processing units (GPUs) that are able to process a defined number of projector channels. Furthermore, this limits the applicability of such multi-projector display systems only to the content that is being generated using desktop based systems. In this paper we propose a platform independent FPGA based scalable hardware architecture for geometric correction of projected content that allows addition of each projector channel at a fractional increase in logic area. The proposed scheme provides real time correction of HD quality video streams and thus enables the use of this technology for embedded and standalone devices.     

An ideal host-guest system to accomplish high-performance greenish yellow and hybrid white organic light-emitting diodes

Greenish yellow organic light-emitting diodes (GYOLEDs) have steadily attracted researcher's attention since they are important to our life. However, their performance significantly lags behind compared with the three primary colors based OLEDs. Herein, for the first time, an ideal host-guest system has been demonstrated to accomplish high-performance phosphorescent GYOLEDs, where the guest concentration is as low as 2%. The GYOLED exhibits a forward-viewing power efficiency of 57.0 lm/W at 1000 cd/m², which is the highest among GYOLEDs. Besides, extremely low efficiency roll-off and voltages are achieved. The origin of the high performance is unveiled and it is found that the combined mechanisms of host-guest energy transfer and direct exciton formation on the guest are effective to furnish the greenish yellow emission. Then, by dint of this ideal host-guest system, a simplified but high-performance hybrid white OLED (WOLED) has been developed. The WOLED can exhibit an ultrahigh color rendering index (CRI) of 92, a maximum total efficiency of 27.5 lm/W and a low turn-on voltage of 2.5 V (1 cd/m²), unlocking a novel avenue to simultaneously achieve simplified structure, ultrahigh CRI (>90), high efficiency and low voltage.     

Breakdown characteristics of oil and paper insulation for a very fast transient voltage

This paper describes the dielectric breakdown characteristics of oil and oil‐impregnated paper for very fast transient (VFT) voltages. Blumlein circuits generate VFT voltages of 60 and 300 ns in a pulse width that simulates disconnecting switching surges in gas‐insulated switch gears. We measured the breakdown voltages of needle‐to‐plane, plane‐to‐plane oil gaps and several pieces of paper between plane electrodes for VFT and lightning impulse voltages. The measured data were formulated in V‐t characteristics and Weibull probability distributions. The inclination n of V‐t characteristics of insulating paper is 150, which is less than n = 13.7 of the plane‐to‐plane oil gap in the VFT time range. The shape parameters of Weibull distribution obtained in this study show that the scattering of breakdown voltages of paper is much less than that of oil. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(4): 16–24, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10043     

钠冷快堆中喷雾钠火的计算分析

根据钠冷快堆中喷雾钠火的特点建立了理论模型，编制了SSPRAY程序。该程序模拟钠喷雾燃料过程中钠滴的运动、钠和氧气的燃烧反应、热量传递和质量传递等瞬态过程。用该程序计算了气体和墙壁温度、气体压力、氧气摩尔份额、喷雾流燃烧速率和热量热递速率等主要参数。利用AI实验数据和美国SPRAY－3A的计算结果对程序进行了验证，结果符合较好。     

气体绝缘封闭电器的高速瞬变过程和现场试验

随着ＧＩＳ的工作电压不断提高和发展，一系列新的现象和问题也同时出现。从国外一些科研，设计，制造部门所研究发表的内容看，大致有隔离开关操作和高速瞬变过程，粒子影响和对干扰定位的技术，元件的监督，现场试验等课题，本文对以上问题加以综合介绍。     

A Survey of Inverse Surface Design From Light Transport Behavior Specification

Inverse surface design problems from light transport behavior specification usually represent extremely complex and costly processes, but their importance is well known. In particular, they are very interesting for lighting and luminaire design, in which it is usually difficult to test design decisions on a physical model in order to avoid costly mistakes. In this survey, we present the main ideas behind these kinds of problems, characterize them, and summarize existing work in the area, revealing problems that remain open and possible areas of further research.     

Let's call it “color‐gamut rendering”

The term “color gamut” historically has been associated with color output such as optimal color stimuli and additive and subtractive imaging systems. Recently, this term has been used with input devices such as scanners and digital cameras. It is proposed that the term “color‐gamut rendering” should be used instead of input devices. This clarifies the distinction between input (analysis) and output (synthesis) color systems in terms of the effect of an input system on defining the colorimetric properties of an output system. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 334–335, 2007     

江苏省县级电力信息网的3种组网方案

对江苏省县级电力信息网工程采用的利用ATM设备、SDH设备和WDM设备的3种组网方案进行了阐述，并分析了各种方案的优缺点。     

Extending the color gamut and dynamic range of an sRGB image using a residual image

Image sources, such as digital camera captures and photographic negatives, typically have more information than can be reproduced on a photographic print or a video display. The information that is lost during the tone/color rendering process relates to both the extended dynamic range and color gamut of the original scene. In conventional photographic systems, most of this additional information is archived on the photographic negative and can be accessed by adjusting the way the negative is printed. However, most digital imaging systems have traditionally archived only a rendered video RGB image. As a result, it is not possible to make the same sorts of image manipulations that historically have been possible with conventional photographic systems. This suggests that there would be an advantage to storing images using an extended dynamic range/color gamut color encoding. However, because of file compatibility issues, digital imaging systems that store images using color encoding other than a standard video RGB representation (e.g., sRGB) would be significantly disadvantaged in the marketplace. In this article, we describe a solution that has been developed to maintain compatibility with existing file formats and software applications, while simultaneously retaining the extended dynamic range and color gamut information associated with the original scenes. With this approach, the input raw digital camera image or film scan is first transformed to the scene‐referred ERIMM RGB color encoding. Next, a rendered sRGB image is formed in the usual way and stored in a conventional image file (e.g., a standard JPEG file). A residual image representing the difference between the original extended dynamic range image and the final rendered image is formed and stored in the image file using proprietary metadata tags. This provides a mechanism for archiving the extended dynamic range/color gamut information, which is normally discarded during the rendering process, without sacrificing interoperability. Appropriately enabled applications can decode the residual image metadata and use it to reconstruct the ERIMM RGB image, whereas applications that are not aware of the metadata will ignore it and only have access to the sRGB image. The residual image is formed such that it will have negligible pixel values for those portions of the image that lie within the sRGB gamut, and will therefore be highly compressible. Tests on a population of 950 real customer images have demonstrated that the extended dynamic range scene information can be stored with an average file size overhead of about 8% compared to the sRGB images alone. © 2003 Wiley Periodicals, Inc. Col Res Appl, 28, 251–266, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10160     

Rendering of Surface and Volume Details in Volume Data*

Aiming at the detail rendering in volume data, a new volume illumination model, called Composed Scattering Model (CSM), is presented. In order to enhance different details in volume data, scattering intensity is decomposed into volume scattering intensity and surface scattering intensity with different weight functions. According to the Gauss probability distribution of gray and gradient of data, we propose an accurate method to detect the materials in a voxel, called composed segmentation. In addition, we discuss the principle of constructing these weight functions based on the operators defined in composed segmentation. CSM can generate images containing more details than most popular volume rendering models. This model has been applied to the direct volume rendering of 3D data sets obtained by CT and MRI. The resultant images show not only rich details but also clear boundary surfaces. CSM is demonstrated as an accurate volume rendering model suited for detail enhancement in volume data sets.