碳纳米管及其批量制备研究进展

从碳纳米管的优异性能和应用出发,综述了碳纳米管的制备方法以及我国目前在碳纳米管研究中面临的问题;分析了碳纳米管产业化对的我国纳米技术产业化发展的积极意义,特别介绍了清华-南风纳米粉体产业化工程中心开发的、具有我国自主知识产权的纳米聚团流态化技术。     

脉冲波形对流化床性能的影响

本文从理论上分析了矩形波和正弦脉波气流对流化床操作性能的影响，发现矩形波在一定条件下优于正弦波的规律，并用实际进行了验证。     

AXIAL PHASES DISTRIBUTION AND HOMOGENIZATION IN THREE-PHASE FLUIDIZED BEDS

We have investigated the axial distribution of the liquid phase in a three-phase fluidized bed in which the particles were glass beads of two different diameters, 710-850 μm and 2 mm. Two methods were used to reduce the axial heterogeneity and homogenize the bed: the use of packing elements and the addition of a small quantity of a high molecular weight polymer. The use of packing elements was shown to be very efficient in controlling phases distribution in the bed. The packing consisted of 1 mm thick steel horizontal plates punched and stretched to obtain parallelogram-shaped openings. The addition of a high molecular weight polyisobutylene (BASF Oppanol B246, M_u, =6.15 Lo⁶) on the phase distribution was also studied. Low polymer concentrations up to 397 ppm (based on the liquid phase) were investigated. The addition of the polymer reduced bubble coalescence and allowed for a better distribution of the phases.     

节涌流化床压力波动动力学研究(Ⅱ)模拟与实验

研究了节涌流化床多自由度随机波动模型参数,提出了确定气栓和料栓长度的试差迭代法、床层底部的“白噪声”扰动函数和床层表面的正态扰动函数.模型模拟计算的结果对于节涌流化床波动结构的动力学特征、压力波动的频谱特征和波动的传播与衰减等与实验结果取得了较好的吻合.     

Permanent jet formation in beds of particulate solids

The simple criterion proposed by Chandnani and Epstein (1984, 1986) for stable spouting, d_or/d_p ≤ 25.4, is shown to give a good separation between gas-solid systems which form permanent jets and those that bubble, for a wide range of experimental data reported in the literature. The criterion is suggested as a necessary but not sufficient condition for permanent jet formation in fluidized, spout-fluid and spouted beds.     

三相流化床中光催化降解反应特性的研究

在设计并建立的流态化光催化反应器中,采用负载型光催化剂对甲基橙水溶液进行了光催化降解实验研究。优化了三相流化状态下光催化反应器的操作条件, 其结果为:气体流量200-250Lh-1,液体流量30 Lh-1,催化剂用量为1.5gkg-1处理液;考察了该反应器中催化剂的使用寿命,为光催化降解技术的工业应用研究提供了参考。     

流化床二组分混合物的适宜分离气速

在等密度与非等密度二组分混合物分离体系中，考察操作气速对分离度的影响，提出物料的静床高对高效分离气速没有影响，而操作气速取其混合物最小流化速度的１．２倍左右时，二组分混合物产生高效分离，并且此操作气速随着二组分混合物分离状态的判定值（等密度混合物指Ｒｍｆ值，非等密度混合物主要指Ｒｐ值）的增加而拓宽。     

Observation of 3‐D Structure of Bubbles in a Fluidized Catalyst Bed

The interface area between the bubble and emulsion phases in a fluidized catalyst bed is one of the important parameters used to analyze and design the fluidized bed reactor. We used a fast‐scanning X‐ray CT system to observe the bubble shape and structure. We then obtained the transient 2‐dimensional cross sectional gas‐phase distribution in a fluidized catalyst bed. Using image‐processing techniques, pseudo 3‐dimensional images of the bubbles were reconstructed. The bubble structure was studied based on the 3‐dimensional images and the previously obtained results in a 2‐dimensional fluidized bed. It was found that the bubble shape was not spherical but complicated, and that the bubbles ascending in a fluidized catalyst bed consisted of some smaller bubbles.     

超细粉流化机理和团聚现象的探讨

在直径60mm的流化床中，以SiO2和TiO2超细粉为原料，考察了粉体物性、粉体填充状态和空气湿度等因素对超细粉流化行为和聚团性质的影响，结果表明：超细粉的流态化经历了活塞流、过渡区和聚团流化3个阶段；聚团的流化行为与大颗粒相似；初始填充状态对超细粉流化行为和聚团大小有重要影响，松填充有利于减小聚团尺寸和减少颗粒夹带，提高流化质量；并结合粉体层受力分析，对超细粉的流化机理和团聚现象进行了探讨。     

Flow Characterization of a Three‐Phase Circulating Fluidized Bed Using an Ultrasonic Technique

The axial and radial distributions of solid and gas holdups were investigated in an air‐water‐glass bead circulating fluidized bed (GLSCFB) using a new ultrasonic technique, with a new method based on signal fluctuations. The cross‐sectional averaged gas and solid holdups measured at two axial positions appear to be similar at all studied operating conditions. The radial non‐uniformity decreases with increasing liquid velocity but does not change with an increasing solid circulating rate. The radial distribution of gas holdup was more uniform for 1.3 mm beads than for 433 µm glass beads.