梯度铝蜂窝夹芯板的力学行为

梯度分层铝合金蜂窝板是一种有效的吸能结构,本工作在梯度铝蜂窝结构的基础上根据梯度率的概念,通过改变蜂窝芯层的胞壁长度,设计了4种质量相同、梯度率不同的铝蜂窝夹芯结构。通过准静态压缩实验,并结合非线性有限元模拟准静态及冲击态下梯度铝蜂窝夹芯结构的变形情况及其力学性能,分析对比了相同质量下梯度铝蜂窝夹芯结构在准静态下的变形模式以及冲击载荷下分层均质蜂窝结构和不同梯度率的分层梯度蜂窝结构的动态响应和能量吸收特性。结果表明:在准静态压缩过程中,铝蜂窝梯度夹芯板的变形具有明显的局部化特征,蜂窝芯的变形为低密度优先变形直至密实,层级之间的密实化应变差随芯层密度的增大而逐渐减小;在高速冲击下,梯度蜂窝板并非严格按照准静态过程中逐级变形直至密实,而是在锤头冲击惯性及芯层密度的相互作用下整体发生的线弹性变形、弹性屈曲、塑性坍塌及密实化;另外,在本工作所设计的梯度率中,当梯度率为γ₁=0.0276时,梯度蜂窝夹芯板的吸能性达到最好,相较于同等质量下的均质蜂窝夹芯板,能量吸收提高了10.63%。     

Locating wind farm for power and hydrogen production based on Geographic information system and multi-criteria decision making method: An application

Hydrogen generation from renewable energy resources is considered as a suitable solution to solve the problems related to the energy sector and the reduction of greenhouse gases. The aim of this study is to provide an integrated framework for identifying suitable areas for the construction of wind farms to produce hydrogen. For this purpose, a combined method of Geographic Information System (GIS) and multi-criteria decision making (MCDM) has been used to locate the power plant in Yazd province. The GIS method in the present study consisted of two parts: constraints and criteria. The constraint section included areas that were unsuitable for the construction of wind farms to produce power and hydrogen. In the present study, various aspects such as physical, economic and environmental had been considered as constraints. In the criteria section, eight different criteria from technical aspects (including average wind speed, hydrogen production potential, land slope) and economic aspects (including distance to electricity grid, distance to urban areas, distance to road, distance to railway and distance to centers of High hydrogen consumption) had been investigated. The MCDM tool had been used to weigh the criteria and identify suitable areas. Analytic Hierarchy Process (AHP) technique was used for weighting the criteria. The results of AHP weighting method showed that economic criteria had the highest importance with a value of 0.681. The most significant sub-criterion was the distance to urban areas and the least significant sub-criterion was the distance to power transmission lines. The results of GIS-MCDM analysis had shown that the most proper areas were in the southern and central sectors of Yazd province. In addition, the feasibility of hydrogen production from wind energy had shown that this province had the capacity to generate hydrogen at the rate of 53.6–128.6 tons per year.     

冰下单载波水声通信试验研究

北极地区战略地位的提高促进了极区各种应用的快速发展，冰下水声通信成为其中一个热点问题。为了研究冰下单载波水声通信性能，在黄海冰区开展冰下试验。重点分析了内嵌锁相环的多通道判决反馈均衡(Multi-channelDecision Feedback Equalization, M-DFE)技术在冰下水声通信中抗多途时延的能力，研究比较了改进比例归一化最小均方(Improved Proportional normalized Least Mean Square, IPNLMS)算法和递归最小二乘(Recursive Least Squares,RLS)算法的均衡性能。试验结果表明IPNLMS和RLS都能克服信道多途效应带来的影响。在牺牲计算复杂度的前提下，RLS具有更好的均衡效果，M-DFE在冰下环境中能够有效消除码间干扰。     

Fabrication of alumina ceramics with functional gradient structures by digital light processing 3D printing technology

Alumina ceramics with different unit numbers and gradient modes were prepared by digital light processing (DLP) 3D printing technology. The side length of each functional gradient structure was 10 mm, the porosity ratio was controlled to 70%, and the number of units were (1 × 1 × 1 unit) and (2 × 2 × 2 unit) respectively. The different gradient modes were named FCC, GFCC-1, GFCC-2 and GFCC-3. SEM, XRD, and other characterization methods proved that these gradient structures of alumina ceramics had only α-Al2O3 phase and good surface morphology. The mechanical properties and energy absorption properties of alumina ceramics with different functional gradient structures were studied by compression test. The results show that the gradient structure with 1 × 1 × 1 unit has better mechanical properties and energy absorption properties when the number of units is different. When the number of units is the same, GFCC-2 and GFCC-3 gradient structures have better compressive performance and energy absorption potential than FCC structures. The GFCC-2 gradient structure with 1 × 1 × 1 unit has a maximum compressive strength of 19.62 MPa and a maximum energy absorption value of 2.72 × 105 J/m3. The good performance of such functional gradient structures can provide new ideas for the design of lightweight and compressive energy absorption structures in the future.     

离线式带钢双面翻转检查站方案设计及实践

针对某酸轧机组检查站穿带困难、检查效率低、产生废品多、故障率高的问题,开发了一种离线式带钢双面检查站。该检查站新增了带钢翻转装置,将在入口分切剪处完成定尺剪切的带钢试样由两侧压板夹紧,中间可升降皮带机落下,翻转装置将带钢试样张紧,并翻转90°或者180°,实现带钢的双面检查。皮带机两侧布置有可升降、可横移的活动操作平台,检测人员站在平台上对带钢进行打磨检查,可同时对带钢上下表面进行检测。由于缩短了带钢的传输距离,有效减少了其他擦划伤的影响,提高了带钢表面质量检测准确性。     

Review and analysis of the hydrogen production technologies from a safety perspective

Hydrogen can be produced via many different technologies; however, from a safety standpoint there exists no framework for selecting the right technology. Here, we provide a structured framework for assessment of the most desirable hydrogen production technology based on efficiency, safety, and infrastructure, by using a Multi-Criteria Decision-Making (MCDM) integrated Analytic Hierarchy Process (AHP) and life-cycle index (LInX) approach. We apply this modified MCDM approach to steam methane reforming (SMR), autothermal reforming, partial oxidation, alkaline electrolysis, polymer electrode membrane electrolysis, and solid oxide electrolyzer cell processes. Our results show that SMR is the most desirable technology based on the efficiency, safety, and infrastructure criteria. We employ fuzzy set theory to address subjectivity and uncertainty challenges in the data and found that although the technologies based on electrolysis have an environmental advantage, they exhibit higher uncertainties than non-renewable technologies such as SMR. Overall, this new framework addresses the challenge to find the most desirable and safer technology for hydrogen production.     

基于k-shell的复杂网络最短路径近似算法

复杂网络最短路径经典算法的处理效率较低，不适用于大规模复杂网络，而现有近似算法通用性有限，且计算准确率不理想，不能满足规模日益扩大的复杂网络中的最短路径计算需求。针对于此，提出基于[k]-shell的复杂网络最短路径近似算法。算法利用节点的[k]-shell值进行网络划分并引导搜索路径，利用超点聚合处理[k]-shell子网来降低路径搜索中节点和连边的规模，通过在路径搜索过程使用双向搜索树方法提高算法的计算效率和准确率。实验结果表明，算法通用性较好，在现实与仿真大规模复杂网络中均具有较高的计算效率和准确率。