南水北调中线总干渠藻类的生态调度

南水北调中线总干渠无在线调蓄水库,对藻类生态调度过程中出现的问题开展生态调度实现策略和实施方式研究。主要实现策略包括:划定自身的调蓄区,隔离生态调度对下游的影响;采用高效的渠池运行方式,减少生态调度时蓄量的反复调整;综合考虑安全、快速、平稳等需求,设定生态调度实施进程和方式。具体实施方式包括:将总干渠划分为流速调控区、调蓄区和正常运行区,分别实施等体积、控制蓄量和闸前常水位方式运行;将生态调度过程划分为充水阶段和泄水阶段,基于流速调控目标值、持续时长和水位降幅约束条件,确定各阶段时长和各分区的闸门群调控方案等。基于2018年3月输水工况,采用明渠一维非恒定流模型,仿真总干渠上游15个渠池的藻类生态调度过程。结果表明,生态调度可在3.5 d内完成,各渠池的平均流速由0.48 m/s增至0.93 m/s,持续时间超过2 h。在整个生态调度过程中,水位变化平稳,水位变幅符合安全阈值要求,下游渠道的正常运行未受生态调度明显影响。     

Application of artificial neural network method to predict the breakage properties of PGE bearing chromite ore

In the present investigation, systematic grinding experiments were conducted in a laboratory ball mill to determine the breakage properties of low-grade PGE bearing chromite ore. The population balance modeling technique was used to study the breakage parameters such as primary breakage distribution (B_{i, j}) and the specific rates of breakage (S_i). The breakage and selection function values were determined for six feed sizes. The results stated that the breakage follows the first-order grinding kinetics for all the feed sizes. It was observed that the coarser feed sizes exhibit higher selection function values than the finer feed size. Further, an artificial neural network was used to predict breakage characteristics of low-grade PGE bearing chromite ore. The predicted results obtained from the neural network modeling were close to the experimental results with a correlation of determination R² = 0.99 for both product size and selection function.     

Catalysts by pyrolysis: Direct observation of transformations during re-pyrolysis of transition metal-nitrogen-carbon materials leading to state-of-the-art platinum group metal-free electrocatalyst

Transition metal-nitrogen-carbon (M-N-C) materials have been the focus of scientists’ efforts to address the rising need for earth-abundant materials solutions for energy technology and decarbonization of the economy. They are viewed as one of the most promising candidates to replace platinum group metal (PGM) catalysts in the fuel cell and energy conversion fields, including the application of oxygen reduction reaction, carbon dioxide reduction reaction, and nitrogen reduction reaction. In the effort to improve M-N-C materials properties and achieve atomic dispersity of the transition metal in the carbonaceous matrix, a re-pyrolysis process has been proposed. This secondary heat treatment process of already obtained primary pyrolysis-derived M-N-C materials has been widely reported to substantially improve the electrochemical performance and operational stability of the catalysts. Here, we report a systematic investigation of this process used on samples of templated M-N-C catalysts to obtain state-of-the-art catalysts via in situ heating X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectroscopy (EDS), electron energy loss spectroscopy (EELS), X-ray diffraction (XRD), and X-ray computed tomography (CT) characterization methods. It is found that the re-pyrolysis of M-N-C materials could result in the partial amorphization of the carbonaceous substrate. It causes the rearrangement and transformation of multitudinous N moieties, leading to optimization of their morphological display and association with atomically dispersed transition metal dopants. Ultimately, the re-pyrolysis results in an increase in uniformity of the active Fe-N_x sites distribution without the formation of nano-crystalline phases (metallic or carbide) and with overall preservation of the morphology of the carbonaceous framework achieved during the first formative pyrolysis step of the templated synthesis. These observations provide confirmation that empirically established re-pyrolysis is recommended to be used on all M-N-C materials despite the different synthesis routes to obtain a practical advanced catalytic material.     

基于CDIO工程教育的应用型人才培养 理论与实践研究 — —以红外多路遥控系统设计为例

The construction of specialty groups in higher vocational colleges is in full swing. However, due to the cognitive bias and the lack of construction paradigm for reference, the construction of specialty groups is still in the period of "crossing the river by feeling the stones" with different opinions. There are some problems in the construction of specialty groups, such as unclear under- standing of the concept of specialty groups, unreasonable logic of groups, unclear construction of groups, and nonstandard manage- ment of groups. This paper describes the specific content of the construction of modern information technology specialty group based on the Sydney Agreement, hoping to form a reference paradigm for the construction of specialty group of similar colleges and universities.     

Systematic convergence of nonlinear stochastic estimators on the Special Orthogonal Group SO(3)

This paper introduces two novel nonlinear stochastic attitude estimators developed on the Special Orthogonal Group with the tracking error of the normalized Euclidean distance meeting predefined transient and steady‐state characteristics. The tracking error is confined to initially start within a predetermined large set such that the transient performance is guaranteed to obey dynamically reducing boundaries and decrease smoothly and asymptotically to the origin in probability from almost any initial condition. The proposed estimators produce accurate attitude estimates with remarkable convergence properties using measurements obtained from low‐cost inertial measurement units. The estimators proposed in continuous form are complemented by their discrete versions for the implementation purposes. The simulation results illustrate the effectiveness and robustness of the proposed estimators against uncertain measurements and large initialization error, whether in continuous or discrete form.     

An improved iterative stochastic multi-objective acceptability analysis method for robust alternative selection in new product development

Alternative selection in new product development (NPD) is a multi-criteria decision-making (MCDM) problem. It usually starts with incomplete, imprecise or even partially missing information. Currently, most existing methods in dealing with this problem cannot work well if required information is incomplete or missing. It is acknowledged that stochastic multi-objective acceptability analysis (SMAA) can be applied to address MCDM problem with incomplete preference information and uncertain criteria measurements. In SMAA, alternatives are evaluated based on SMAA measurements (acceptability index, central weight vector and confidence factor). The discriminability of SMAA for the optimum alternative heavily depends on differences of SMAA measurements among different alternatives. Usually, a large number of alternatives and high level of uncertainty are involved in alternative selection in NPD. In this situation, the differences among SMAA measurements are not obvious, and therefore SMAA cannot deal with such problem very well. To this end, this paper proposes an improved SMAA method called Iterative-SMAA (I-SMAA) for alternative selection in NPD. In the I-SMAA, an iterative multi-step decision-making process is suggested to improve differences of SMAA measurements among different alternatives, and thus assist decision makers (DMs) to positively discern from the most preferred alternative. To enhance the decision-making efficiency, sensitive criteria are acquired in each iteration by ranking sensitivity analysis. DMs are guided to provide partial preference information and give more accurate criteria measurements for sensitive criteria rather than all criteria. Eventually, to verify the proposed method, a numerical example of the existing literature is solved with the method, and the results are compared. And then, a practical example of a preparation equipment for coal samples is further employed to verify the practicability of the proposed I-SMAA.     

课程群案例嵌入协同教学模式的探索

在课程群的教学中由于每门课程各自独立开展教学,缺乏知识的融合和衔接,导致学生运用综合知识解决问题的能力较弱。在课程群的教学中采用案例嵌入协同教学模式,将完整的工程案例嵌入到课程群各门课程的教学中,协同规划各门课程的教学任务,每门课程再围绕案例展开研究性教学。通过嵌入的工程案例衔接各门课程的知识点,帮助学生建构完整的知识体系,强化工程应用的概念；同时通过研究性教学,培养学生分析问题和解决问题的能力,两部分相结合,提高了学生运用综合知识解决复杂问题的能力。     

近距离煤层群采空区漏风规律及防控措施研究

贵州地区煤层赋存条件复杂,煤层间距小,相邻采空区存在漏风通道的问题。采用SF6示踪法及重点区域指标气体数据分析法,对发耳煤矿采空区漏风规律及其治理措施进行研究。分析结果表明,由于相邻密闭效果欠佳,导致31004开切眼联络巷及31004工作面回风巷密闭漏风严重。31004采空区漏风通道主要是31004开切眼联络巷密闭及10^#煤层开采过程中对上部7^#煤层采空区造成二次扰动形成的纵向漏风通道;漏风量为83 m^3/min,采空区风速约为0.17 m/s。对存在的煤自燃隐患采取了注水降温措施,CO体积分数显著下降至(5~9)×10^-6。为即将开采的50105、50107工作面的煤自燃防控提供了科学依据和管控措施方案。     

基于MSA的土石坝群体地震易损性研究

针对地震发生后亟需对土石坝群体震害进行快速评估的问题,基于统计数据和MSA方法,提出了土石坝群体震害易损性分析方法。通过分析土石坝群体震害数据,对震损大坝进行等级划分,结合地震破坏损失比和破坏比建立土石坝地震易损性矩阵。并引入MSA方法,建立土石坝群体震害易损性评估模型,计算出四种烈度下易损性参数及易损性曲线和概率,为土石坝群体震害快速评估提供了依据。