毫米波三维异质异构集成技术的进展与应用

三维异质异构集成技术是实现电子信息系统向着微型化、高效能、高整合、低功耗及低成本方向发展的最重要方法,也是决定信息化平台中微电子和微纳系统领域未来发展的一项核心高技术。文章详细介绍了毫米波频段三维异质异构集成技术的优势、近年来的发展趋势以及面临的挑战。利用硅基MEMS 光敏复合薄膜多层布线工艺可实现异质芯片的低损耗互连,同时三维集成高性能封装滤波器、高辐射效率封装天线等无源元件,还能很好地处理布线间的电磁兼容和芯片间的屏蔽问题。最后介绍了一款新型毫米波三维异质异构集成雷达及其在远距离生命体征探测方面的应用。     

格点QCD基础求解器及其异构计算实现的性能优化

格点量子色动力学(格点QCD)是研究夸克、胶子等微观粒子间相互作用的重要理论和方法. 通过将时空离散化为四维结构网格, 并将量子色动力学的基本场量定义在网格上, 让研究人员可以使用数值模拟方法, 从第一性原理出发研究强子间相互作用和性质, 但这个过程中的计算量极大, 需要进行大规模并行计算. 格点QCD计算的核心基础为格点QCD求解器, 是程序运行主要的计算热点模块. 本文研究在国产异构计算平台下格点QCD求解器的实现与优化, 提出一套格点QCD求解器的设计实现, 实现了BiCGSTAB求解器, 显著降低了迭代次数; 通过对奇偶预处理技术, 降低了所求问题的计算规模; 针对国产异构加速卡的特点, 优化了Dslash模块的访存操作. 实验测试表明, 相比优化前的求解器获得了约30倍的加速比, 为国产异构超算下格点QCD软件性能优化提供了有益的参考价值.     

Applications of sketches in network traffic measurement: A survey

Accurate and timely network traffic measurement is essential for network status monitoring, network fault analysis, network intrusion detection, and network security management. With the rapid development of the network, massive network traffic brings severe challenges to network traffic measurement. However, existing measurement methods suffer from many limitations for effectively recording and accurately analyzing big-volume traffic. Recently, sketches, a family of probabilistic data structures that employ hashing technology for summarizing traffic data, have been widely used to solve these problems. However, current literature still lacks a thorough review on sketch-based traffic measurement methods to offer a comprehensive insight on how to apply sketches for fulfilling various traffic measurement tasks. In this paper, we provide a detailed and comprehensive review on the applications of sketches in network traffic measurement. To this end, we classify the network traffic measurement tasks into four categories based on the target of traffic measurement, namely cardinality estimation, flow size estimation, change anomaly detection, and persistent spreader identification. First, we briefly introduce these four types of traffic measurement tasks and discuss the advantages of applying sketches. Then, we propose a series of requirements with regard to the applications of sketches in network traffic measurement. After that, we perform a fine-grained classification for each sketch-based measurement category according to the technologies applied on sketches. During the review, we evaluate the performance, advantages and disadvantages of current sketch-based traffic measurement methods based on the proposed requirements. Through the thorough review, we gain a number of valuable implications that can guide us to choose and design proper traffic measurement methods based on sketches. We also review a number of general sketches that are highly expected in modern network systems to simultaneously perform multiple traffic measurement tasks and discuss their performance based on the proposed requirements. Finally, through our serious review, we summarize a number of open issues and identify several promising research directions.     

Heterogeneous Bimetallic Mo-NiPx/NiSy as a Highly Efficient Electrocatalyst for Robust Overall Water Splitting

Highly efficient electrocatalysts composed of earth-abundant elements are desired for water-splitting to produce clean and renewable chemical fuel. Herein, a heteroatomic-doped multi-phase Mo-doped nickel phosphide/nickel sulfide (Mo-NiP_x/NiS_y) nanowire electrocatalyst is designed by a successive phosphorization and sulfuration method for boosting overall water splitting (both oxygen and hydrogen evolution reactions (HER)) in alkaline solution. As expected, the Mo-NiP_x/NiS_y electrode possesses low overpotentials both at low and high current densities in HER, while the Mo-NiP_x/NiS_y heterostructure exhibits high active performance with ultra-low overpotentials of 137, 182, and 250 mV at the current density of 10, 100, and 400 mA cm⁻² in 1 m KOH solution, respectively, in oxygen evolution reaction. In particular, the as-prepared Mo-NiP_x/NiS_y electrodes exhibit remarkable full water splitting performance at both low and high current densities of 10, 100, and 400 mA cm⁻² with 1.42, 1.70, and 2.36 V, respectively, which is comparable to commercial electrolysis.     

Effects of SiC,Al2O3, and ZrO2 particles on the LBMed characteristics of Al/SiC,Al/Al2O3, and Al/ZrO2 MMCs prepared by stir casting process

The effects of SiC, Al₂O₃, and ZrO₂ particles on the characteristics of Al/SiC, Al/Al₂O₃, and Al/ZrO₂ metal matrix composites (MMCs) have been studied in the present research work. The comparison of machining characteristics has been done to analyze the behavior of various reinforced particles with the variation of laser machining variables. The output characteristics such as dross height and kerf deviation have been investigated and compared with each MMCs. SEM and XRD have been used for the investigation of morphological changes in the structure and agglomeration of reinforced particles. The crack and recast layer formation has been examined in the specimens of higher quantity of reinforced particles. It was observed that the MMC material reinforced with SiC particles has shown different behavior as compared to other MMC materials.     

物联网中基于Multi-Agent的物间动态关系发现

物联网中存在大量异构关系的实体，其信息间的交互造成了物联网的内在矛盾。针对这一问题，提出将物联网中实体抽象化为对应的Agent，并以个体人为中心，利用本体的语义匹配及改进的物间动态关系计算方法，计算出针对个体人的物间动态关系；将原本异构的实体关系转化为Agent间基于动态关系紧密度排序的网络关系。经实验验证，该方法构建的关系网络可明显改善异构实体间交互的矛盾，而且相比原有类似方法，该方法解决问题的准确率和误差率均有改善，说明了该方法的准确性和可行性。     

等离子弧异质异构增材制造构件的组织与力学性能分析

采用等离子弧增材系统实现了不锈钢/高强钢异质异构增材构件制备，等离子弧增材构件具有良好的沉积形貌及优异的力学性能.为揭示叠合方式对等离子弧异质增材构件的宏微观组织和力学性能特征影响，研究采用了体视显微镜、金相显微镜、拉伸及硬度等测试方法.结果表明，不锈钢/高强钢异质异构增材构件中存在两种过渡形式，即以奥氏体枝晶过渡和马氏体组织过渡.增材构件横截面硬度波动较大，主要是混合过渡区域的高合金元素导致的组织变化引起的.叠合方式的改变能够显著影响材料性能，在强度下降不多的情况下，提高材料的冲击韧性.     

基于高斯混合隐马尔科夫模型与人工神经网络的紧急换道行为预测方法

为了有效降低因驾驶员紧急换道行为而诱发的交通事故，提高道路交通事故链阻断效率，提出一种基于高斯混合隐马尔科夫模型（GMM-HMM）和人工神经网络（ANN）的紧急换道行为预测方法。首先利用GMM-HMM对车辆行驶状态以及驾驶行为连续观察序列进行换道意图辨识，采用ANN预测下一时段的驾驶行为，再预测换道过程中的横向加速度变化率，从而判断紧急换道的危险程度。驾驶员在环仿真实验及实车实验结果表明，该方法预测避险成功率达92.83%，实验避险成功率达90.32%。该方法能有效地对紧急换道行为进行提前警告与干预。     

Computational continua for linear elastic heterogeneous solids on unstructured finite element meshes

The computational continua framework, which is a variant of higher‐order computational homogenization theories that is free of scale separation, does not require higher‐order finite element continuity, and is free of higher‐order boundary conditions, has been generalized to unstructured meshes. The salient features of the proposed generalization are (i) a nonlocal quadrature scheme for distorted elements that accounts for unit cell distortion in the parent element domain and (ii) an approximate variant of the nonlocal quadrature that eliminates the cost of computing positions of the quadrature points in the preprocessing stage. The performance of the computational continua framework on unstructured meshes has been compared to the first‐order homogenization theory and the direct numerical simulation.     

Multi-Scale Analysis of Fretting Fatigue in Heterogeneous Materials Using Computational Homogenization

This paper deals with modeling of the phenomenon of fretting fatigue in heterogeneous materials using the multi-scale computational homogenization technique and finite element analysis (FEA). The heterogeneous material for the specimens consists of a single hole model (25% void/cell, 16% void/cell and 10% void/cell) and a four-hole model (25% void/cell). Using a representative volume element (RVE), we try to produce the equivalent homogenized properties and work on a homogeneous specimen for the study of fretting fatigue. Next, the fretting fatigue contact problem is performed for 3 new cases of models that consist of a homogeneous and a heterogeneous part (single hole cell) in the contact area. The aim is to analyze the normal and shear stresses of these models and compare them with the results of the corresponding heterogeneous models based on the Direct Numerical Simulation (DNS) method. Finally, by comparing the computational time and % deviations, we draw conclusions about the reliability and effectiveness of the proposed method.