Real time power management strategy for fuel cell hybrid electric bus based on Lyapunov stability theorem

The fuel cell/battery durability and hybrid system stability are major considerations for the power management of fuel cell hybrid electric bus (FCHEB) operating on complicated driving conditions. In this paper, a real time nonlinear adaptive control (NAC) with stability analyze is formulated for power management of FCHEB. Firstly, the mathematical model of hybrid power system is analyzed, which is established for control-oriented design. Furthermore, the NAC-based strategy with quadratic Lyapunov function is set up to guarantee the stability of closed-loop power system, and the power split between fuel cell and battery is controlled with the durability consideration. Finally, two real-time power management strategies, state machine control (SMC) and fuzzy logic control (FLC), are implemented to evaluate the performance of NAC-based strategy, and the simulation results suggest that the guaranteed stability of NAC-based strategy can efficiently prolong fuel cell/battery lifespan and provide better fuel consumption economy for FCHEB.     

Ultrasonically dispersed multi-composite strategy of NiCo2S4/Halloysite nanotubes/carbon: An efficient solid-state hybrid supercapacitor and hydrogen evolution reaction material

Herein, we have developed a novel hybrid material based on NiCo₂S₄ (NCS), halloysite nanotubes (HNTs), and carbon as promising electrodes for supercapacitors (SCs). Firstly, mesoporous NCS nanoflakes were prepared by co-precipitation method followed by physically mixing with HNTs and carbon, and screen printed on nickel foam. After ultrasonication, a uniform distribution of the Carbon/HNTs complex was observed, which was confirmed by surface morphological analysis. When used as electrode material, the NCS/HNTs/C hybrid displayed a maximum specific capacity of 544 mAh g^?1 at a scan rate of 5 mV s^?1. Later, a solid-state hybrid SCs was fabricated using activated carbon (AC) as the negative and NCS/HNTs/C as the positive electrode (NCS/HNTs/C//AC). The device delivers a high energy density of 42.66 Wh kg^?1 at a power density of 8.36 kW kg^?1. In addition, the device demonstrates long-term cycling stability. Furthermore, the optimized NCS, NCS/HNTs, and NCS/HNTs/C nanocomposites also presented superior hydrogen evolution reaction (HER) performance of 201, 169, and 116 mV in the acidic bath at a current density of 10 mA cm^?2, respectively. Thus, the synthesis of NCS/HNTs/C nanocomposite as positive electrodes for hybrid SCs opens new opportunities for the development of next-generation high energy density SCs.     

基于混合模式快速电荷平衡的神经刺激器

设计实现了一种可用于脊髓神经刺激器的多通道大电流神经刺激器。提出将电极短接和插入短电流脉冲相结合的混合模式,在大电流下,能更加快速地实现电荷平衡。电路设计上,将ADC动态比较器的回踢噪声消除技术应用于神经刺激器,使得动态比较器在输入压差较小时能够输出正确的比较结果,从而将电极上残留电压保持在更安全的范围内。基于CSMC 0.25 μm BCD工艺进行设计与仿真,结果表明,在单向且最大刺激电流为4 mA、刺激脉宽为60 μs、刺激周期为750 μs的条件下,该15 V、16路神经刺激器能实现±50 mV安全电压的有源电荷平衡。     

直流配网型混合动力系统在车客渡船上的应用

针对车客渡船动力负荷切换频繁,传统柴油机推进油耗高、排放和噪声大的问题,提出一种基于变速发电机组和超级电容储能装置的直流配网型混合动力系统。目前系统已成功应用于“江苏路渡3011”轮,实船运行数据显示:该混合动力系统不仅能达到较好的节油效果、降低排放,更在操控性、舒适性上优于传统的柴油机推进模式。     

聚类混合型数据的密度峰值改进算法

聚类混合型数据，通常是依据样本属性类别的不同分别进行评价。但这种将样本属性划分到不同子空间中分别度量的方式，割裂了样本属性原有的统一性；导致对样本个体的相似性评价产生了非一致的度量偏差。针对这一问题，提出以二进制编码样本属性，再由海明差异对属性编码施行统一度量的新的聚类算法。新算法通过在统一的框架内对混合型数据实施相似性度量，避免了对样本属性的切割，在此基础上又根据不同属性的性质赋予其不同的权重，并以此评价样本个体之间的相似程度。实验结果表明，新算法能够有效地聚类混合型数据；与已有的其他聚类算法相比较，表现出更好的聚类准确率及稳定性。     

基于混合蚁群算法的异质车队低碳VRP研究

针对货运车辆在配送调度过程中产生大量碳排放的问题，建立模型将多种影响碳排放量的因素协同优化。模型中考虑了不同载重量的异质车队，两个节点之间有多条道路的柔性路径，以及车辆重量随卸货而减少的动态负载等因素，以碳排放量、行驶时间和行驶路程为优化目标，并加入了节点需求时间窗、根据速度变化划分路段、交接和卸货时间的约束。提出了一种混合蚁群算法，利用蚁群算法信息素强度更新方式保持群体记忆性，利用粒子群算法的快速收敛特性增加计算效率。通过随机数值算例的仿真优化与对比分析，验证了算法和模型的有效性。     

Stochastic stabilization and destabilization of nonlinear and time‐varying hybrid systems by noise

The aim of this article is to design a suitable strength function g(t,x,r(t)) such that the Wiener noise g(t,x(t),r(t))dw(t) either stabilizes or destabilizes a given nonlinear and time‐varying hybrid system . To this end, the basic properties, including the existence and uniqueness of the local and global solutions and the nonzero property of solutions of the nonlinear and time‐varying hybrid stochastic systems, are first investigated as the theoretical basis of the article. Second, two theorems and the corresponding corollaries on the stability and instability of the hybrid stochastic systems are established. Third, the design method for the noise strength g(t,x,r(t)) is then proposed based on the established theorems. We also point out that the Markov jump r(t) may have a stabilizing (respectively, destabilizing) effect when we design the noise strength g(t,x,r(t)) so that the introduced noise g(t,x(t),r(t))dw(t) stabilizes (respectively, destabilizes) the corresponding hybrid system. Finally, we illustrate our method using two examples. Compared with the existing literature, our method is suitable for a wider class of nonlinear and time‐varying systems with weaker conditions than quasi‐linear systems.     

Microstructure–mechanical property relationship in an Al–Mg alloy processed by constrained groove pressing-cross route

The constrained groove pressing-cross route process was implemented on a commercially annealed AA5052 alloy at room temperature, with up to two passes (strain of ～4.64) along the rolling direction and transverse direction. The results showed the formation of an ultrafine-grained structure with an average sub-grain/cell size in the 300–500?nm range. The indentation hardness and tensile strength increased significantly, up to ～75 and 105%, respectively, and became more homogenous with a uniform and isotropic trend, as compared to the annealed alloy. According to the Hall–Petch and Taylor models used, grain refinement and increasing dislocation density were proposed as the main strengthening mechanisms. Fractographic studies revealed a ductile-fracture behaviour, with a dimpled structure proportional to the UFG structure.     

The thermodynamic characteristics of a Stirling/pulse tube hybrid cryocooler

A Stirling/pulse tube hybrid cryocooler (SPC), comprised of a Stirling cryocooler as the first stage and a pulse tube cryocooler as the second stage, features the ability of shifting cooling capacity between stages by adjusting the movement of the displacer in the first stage. Such an ability allows an SPC to accommodate itself to time-varying heat loads at different temperatures, which makes it a competitive candidate in space applications. However, due to the gas coupling, there exists a significant mutual effect between stages which endows an SPC with special thermodynamic characteristics and has a significant effect on the SPC’s capability of shifting cooling capacity between stages. With the phasor analysis and the thermodynamic analysis, this paper establishes an idealized model of an SPC. The model is then used to study the effect of the second stage on the first stage and reveal the condition that an SPC is able to shift cooling capacity between stages. Also, the model is compared with a Sage numerical model and the two models are consistent on the overall trend. Though it is unable to reflect reality precisely, the idealized model can interpret the mechanism and highlight some of the essential nature of an SPC, which will eventually benefit the appropriate design of an SPC.     

TLCD基础隔震框架结构的减振控制研究

为了避免和减轻由过大隔震层位移引起的损害,对基础隔震框架结构装设调频液柱阻尼器(tuned liquid column damper,简称TLCD)后混合系统的减振效果进行研究。建立了单层和多层混合控制系统在地震作用下的运动方程,采用TLCD-结构体系转化为调频质量阻尼器(tuned mass damper,简称TMD)-结构体系的等效方法,利用TMD参数优化公式,得到单个TLCD初始设计参数,并采用状态空间方程得到多个TLCD最优设计参数。通过对某8层基础隔震结构进行模拟,证明了该理论设计方法的合理性。该混合结构不仅可以减小隔震层位移和加速度,而且对上部结构位移和加速度反应都能更有效的控制。