南水北调中线总干渠藻类的生态调度

南水北调中线总干渠无在线调蓄水库,对藻类生态调度过程中出现的问题开展生态调度实现策略和实施方式研究。主要实现策略包括:划定自身的调蓄区,隔离生态调度对下游的影响;采用高效的渠池运行方式,减少生态调度时蓄量的反复调整;综合考虑安全、快速、平稳等需求,设定生态调度实施进程和方式。具体实施方式包括:将总干渠划分为流速调控区、调蓄区和正常运行区,分别实施等体积、控制蓄量和闸前常水位方式运行;将生态调度过程划分为充水阶段和泄水阶段,基于流速调控目标值、持续时长和水位降幅约束条件,确定各阶段时长和各分区的闸门群调控方案等。基于2018年3月输水工况,采用明渠一维非恒定流模型,仿真总干渠上游15个渠池的藻类生态调度过程。结果表明,生态调度可在3.5 d内完成,各渠池的平均流速由0.48 m/s增至0.93 m/s,持续时间超过2 h。在整个生态调度过程中,水位变化平稳,水位变幅符合安全阈值要求,下游渠道的正常运行未受生态调度明显影响。     

日本の寒地，北海道における2030年代の水稲生育への温暖化の影響予測とその対応(日语原文)

北海道では1980年代から2010年代まで，水稲圃場栽培期間である5–9月の気温は年代とともに上昇した。そこで，直近の2010年代（2010—2019年平均）と比べて， 2つの2030年代の予測気象から，既報の関係式より水稲生育を予測した。その結果，2030年代では2010年代に比べ，限界移植日（移植早限）が水稲栽培17地域の平均で8～9日早い。また，早限出穂期が1～5日早く，晩限出穂期が1～5日遅く，安全出穂期間が2～10日長い。出穂期は1～3日早い。出穂期から晩限出穂まで2～9日長いため，遅延型冷害の発生がやや少ない。生育期別気象は，出穂前24日以降30日間では生育が早いため平均気温が同じかやや低い。出穂前10日以降40日間および出穂期以降40日間では平均気温がやや高く，日射量はやや少ない。そのため，玄米収量は96～98％とやや低く，潜在収量性を示す気候登熟量示数は同じである。障害不稔発生に関係する穂ばらみ期冷害危険期の平均気温はわずかに低いかほぼ同じであるため，冷害発生の危険性は残る。一方，不稔発生をもたらす低温域の出現頻度には，地域間で差異がある。精米蛋白質含有率は同じであるが，アミロース含有率はやや低く，やや良食味である。米粒外観品質では被害粒歩合と着色粒歩合は一定の傾向がなく，未熟粒歩合はやや高い。精米白度は同じであるが，玄米白度はやや高い。以上の予測に対する技術的対応方向を示した。     

带权决策表的属性约简

属性约简是粗糙集理论的重要应用。考虑将决策表中的每行都作为一条决策规则时，若把表中出现相同决策规则的次数作为权，可得到带权决策表。提出了关于带权决策表的正域约简相应的辨识矩阵并给出了证明，从而得到了约简算法。相比于决策表中的正域约简时发现，通过将决策表转化为带权决策表后，再利用算法1进行约简时，其在一定程度上优于前者。提出了近似分类精度约简相应的辨识矩阵并给出了证明。对于2个算法，在选取的UCI数据集上进行了实验验证。通过实验进一步说明了所提出算法的可行性和有效性。     

On optical flow techniques applied to breaking surges

Surface wave breaking is a challenging two-phase flow process which plays an important role in numerous physical processes. A highly-turbulent unsteady breaking surge was investigated experimentally in a large facility, and substantial aeration occurred in the roller. The application of three optical flow techniques (Lucas-Kanade, Horn-Schunck and Farnback) to the air-water region was tested. The results indicated that the Farnback technique provided most accurate results, although some misleading results could be obtained near the air-water boundaries of the roller. The bore generation by a rapid gate closure showed a highly-unsteady complicated velocity field, with substantial free-surface deformations, wave breaking and formation of large coherent structures before the surge detached from the gate. Further upstream, the surge propagated as a hydraulic jump in translation and the data showed a marked shear region with a recirculation zone above, showing air-water flow features comparable to stationary hydraulic jumps. The upper and lower bounds of air-water flow region yielded data implying an air-to-water velocity ratio about 4–5 for a Froude number Fr₁ = 2.1.     

Governance choices and policy outcomes in the Latin American and caribbean electricity sector

The paper first provides, for Latin America and the Caribbean, country-specific synthetic quantitative measures of the degree of adoption of governance reforms in the electricity sector, focusing on four key dimensions (market structure, private sector participation (PSP), regulatory autonomy and operational organization). These measures are then correlated with standard policy performance outcomes measures. The findings suggest that, the reforms, considered jointly, were statistically significantly associated with higher technical and process quality but not with social or service improvements. Considered individually, increased regulatory autonomy enjoyed the highest positive correlation with desirable outcomes, but PSP has no significant correlation with any of the outcomes. In sum, as of 2018, governance reforms, considered jointly, had still not delivered on some promised payoffs, notably in addressing energy poverty, although the sensitivity analysis suggests that, for some indicators, the relationships are stronger for larger than for smaller countries.     

两相区配分时间对IQ&P钢组织与性能的影响

以含Cu低碳钢为研究对象,利用SEM、EPMA和拉伸试验研究了两相区配分时间对其组织演变、元素配分以及经IQ&P处理后力学性能的影响,并利用Dictra软件对元素配分行为进行了动力学计算。结果表明,IQ处理后试验钢中的块状马氏体形成于原铁素体区域;随两相区配分时间延长,粒状马氏体数量减少,板条状马氏体之间的间距减小。检测和计算结果的对比显示,C、Mn、Cu 3种元素的相对配分速率与计算结果一致,但实际配分速率低于各自的计算结果。随两相区配分时间延长,经IQ&P处理后试验钢的抗拉强度先增加后减小,而伸长率持续减小;在600 s时达到较好的强塑性匹配,强塑积为16 963.24 MPa·%。     

甘肃省陇东地区极端降水的时空特征

为阐明甘肃省陇东地区极端降水的变化规律,利用该地区13个气象台站1961~2015年的逐日降水资料,应用超门限峰值法、反距离加权法、线性倾向估计法、滑动平均法、Mann-Kendall突变分析法、复值Morlet小波分析法研究极端降水的时空变化特征。结果表明,陇东地区各站第95百分位极端降水阈值在27.8mm附近变化,即可以大雨事件作为极端降水事件进行监测;极端降水指数主要表现为从南向北递减的趋势,极端降水事件对环县和崆峒的影响较小;极端降水事件虽然在总量、强度上表现为减小趋势,但其发生频次及对总降水的贡献率逐渐增强;极端降水总量和极端降水强度周期变化均在21年左右能量最强,而极端降水频次和极端降水贡献率周期变化分别在28、5年左右能量最强。     

Void region restriction for additive manufacturing via a diffusion physics approach

A longstanding challenge in additive manufacturing (AM), the presence of void regions in additively manufactured components, causes two main issues: the enclosing of build material powder in powder bed fusion techniques and limiting tool access in critical post-processing operations to remove sacrificial support structures. As topology optimization has embraced and overcome many of the obstacles of incorporating AM constraints into the underlying numerical optimization statement, there exist few solutions that directly address this fundamental void region issue. By developing computationally efficient and effective solutions to this problem, the integration of these two advanced technologies can be fully realized. Drawing on inspiration from the principles of diffusion physics, a particle diffusion void restriction (PDVR) method is presented in this work that is capable of encouraging the optimization scheme to generate final designs that are fully accessible. Additionally, this method empowers the user to choose the type of post-processing method to clear support material (eg, three-axis or five-axis milling operations, number and orientation of part set-ups) and, therefore, quantify the level of costs associated with the post-processing operation. The PDVR optimization framework is demonstrated on multiple two- and three-dimensional test problems, with physically manufactured examples depicting the real-world benefits this method admits.     

Optimal supplementary frequency controller design using the wind farm frequency model and controller parameters stability region

In most of the existing studies, the frequency response in the variable speed wind turbines (VSWTs) is simply realized by changing the torque set-point via appropriate inputs such as frequency deviations signal. However, effective dynamics and systematic process design have not been comprehensively discussed yet. Accordingly, this paper proposes a proportional-derivative frequency controller and investigates its performance in a wind farm consisting of several VSWTs. A band-pass filter is deployed before the proposed controller to avoid responding to either steady state frequency deviations or high rate of change of frequency. To design the controller, the frequency model of the wind farm is first characterized. The proposed controller is then designed based on the obtained open loop system. The stability region associated with the controller parameters is analytically determined by decomposing the closed-loop system's characteristic polynomial into the odd and even parts. The performance of the proposed controller is evaluated through extensive simulations in MATLAB/Simulink environment in a power system comprising a high penetration of VSWTs equipped with the proposed controller. Finally, based on the obtained feasible area and appropriate objective function, the optimal values associated with the controller parameters are determined using the genetic algorithm (GA).     

松辽盆地徐家围子断陷沙河子组储层特征及控制因素

徐家围子断陷沙河子组是松辽盆地北部近期天然气勘探的主要目标，这类致密砂砾岩气层的储层特征及控制因素研究是首要的。通过分析其白垩系早期拉张构造背景条件下形成的一套断陷沉积，纵向上可划分为4个三级层序，各层序在断陷湖盆陡坡带和缓坡带发育扇三角洲和辫状河三角洲沉积。研究表明其储层主要为砂砾岩和含砾粗砂岩等粗碎屑岩。沙河子组储层孔隙包括原生粒间孔和次生孔隙，孔隙度主要分布在2%~8%，渗透率多小于0.1×10^-3 μm²，为致密储层。沙河子组储层发育的控制因素包括埋深、沉积相带、岩石类型和次生成岩作用，埋藏浅的扇三角洲（辫状河三角洲）前缘、平原相砂砾岩储层物性好，含火山碎屑物质的砂岩、砂砾岩易于形成溶蚀孔隙，改善储集性能。徐家围子断陷沙河子组有利储层主要位于埋深小于4 000 m的安达东、西两侧的扇三角洲前缘、平原区和徐东、徐西的构造高部位扇体发育区，埋藏较浅的安达中部滨浅湖相和埋藏较深的徐东、徐西斜坡扇体发育区也是较有利的储层发育区。