基于邻层数据匹配的工业 CT 图像生成 G 代码方法

针对目前工业CT图像转换为3D打印G代码方法效率低的问题,提出一种基于邻层数据匹配的工业CT图像直接转换成G代码的方法。首先采用Canny算子提取工业CT图像的轮廓,然后处理轮廓分叉问题,实现邻层间几何信息数据匹配,其次进行邻层间轮廓插值以满足3D打印层间厚度要求,从而避免"阶梯效应",最后通过填充编码得到用于3D打印的G代码。使用本文提出的方法,轮毂CT图像转换为G代码的时间为10.5 s,耗时远小于其他间接转换方法;3D打印出的轮毂无"阶梯效应",平均尺寸误差率为0.25%。实验结果表明,该方法不涉及中间格式,转换效率高,转换误差与传统方法相当,适用于具有复杂内腔结构的零件。     

Techno-economic analysis of hydrogen energy for renewable energy power smoothing

With the increasing proportion of renewable energy (mainly wind power and photovoltaic) connected to the grid, the fluctuation of renewable energy power brings great challenges to the safe and reliable operation of power grid. As a clean, low-carbon secondary energy, hydrogen energy is applied in renewable energy (mainly wind power and photovoltaic) grid-connected power smoothing, which opens up a new way of coupling hydrogen storage energy with renewable energy. This paper focuses on the optimization of capacity of electrolyzers and fuel cells and the analysis of system economy in the process of power output smoothing of wind/photovoltaic coupled hydrogen energy grid-connected system. Based on the complementary characteristics of particle swarm optimization (PSO) and chemical reaction optimization algorithm (CROA), a particle swarm optimization-chemical reaction optimization algorithm (PSO-CROA) are proposed. Aiming at maximizing system profit, the capacity of electrolyzers and fuel cells are constrained by wind power fluctuation, and considering environmental benefits, government subsidies and time value of funds, the objective function and its constraints are established. According to the simulation analysis, by comparing the calculated results with PSO and CROA, it shows that PSO-CROA effectively evaluates the economy of the system, and optimizes the optimal capacity of the electrolyzers and fuel cells. The conclusion of this paper is of great significance for the application of hydrogen energy storage in the evaluation of power smoothness and economy of renewable energy grid connection and the calculation of economic allocation of hydrogen energy storage capacity.     

核磁共振磷谱法测定乳制品中的酪蛋白含量

基于插值法建立乳制品中酪蛋白的核磁共振磷谱定量检测方法。结果表明，该方法的检出限为0.38 g/L（信噪比（RSN）=3），定量限为1.25 g/L（RSN=10）；在5.00～35.00 g/L质量浓度范围内线性良好，相关系数R2大于0.999；加标回收率在91.94%～105.10%范围区间；日内精密度在0.65%～1.40%范围区间；日间精密度在1.40%～1.80%范围区间。对市售不同乳制品中酪蛋白含量进行检测，该方法与GB 31638—2016《酪蛋白》测定结果误差在±5%以内，满足方法可行性对比分析验证要求。该方法相比常规方法样品前处理简单、定量准确性高，大大缩短了检测时间，且有更广泛的适用性，满足乳制品中酪蛋白快速定量检测的要求。     

A cell-based smoothed radial point interpolation method with virtual nodes for three-dimensional mid-frequency acoustic problems

It is well known that the finite element method (FEM) encounters dispersion errors in coping with mid-frequency acoustic problems due to its “overly stiff” nature. By introducing the generalized gradient smoothing technique and the idea of condensed shape functions with virtual nodes, a cell-based smoothed radial point interpolation method is proposed to solve the Helmholtz equation for the purpose of reducing dispersion errors. With the properly selected virtual nodes, the proposed method can provide a close-to-exact stiffness of continuum, leading to a conspicuous decrease in dispersion errors and a significant improvement in accuracy. Numerical examples are examined using the present method by comparing with both the traditional FEM using four-node tetrahedral elements (FEM-T4) and the FEM model using eight-node hexahedral elements with modified integration rules (MIR-H8). The present cell-based smoothed radial point interpolation method has been demonstrated to possess a number of superiorities, including the automatically generated tetrahedral background mesh, high computational efficiency, and insensitivity to mesh distortion, which make the method a good potential for practical analysis of acoustic problems.     

Fuzzy logic approach in resource classification

Conventional geostatistical prediction methods can be used to carry out resource classification in ore beds and for reliability measurements. A field investigation based on lignite thickness data was conducted for resource classification in Eskisehir-Mihaliccik-Koyunagili coal basin. Moreover, a fuzzy logic-based resource classification method has been recently proposed to eliminate the uncertainties encountered in the conduct of conventional resource classification procedure. Fuzzy logic-based classification provides gradual transitions between two adjacent resource classes. In addition, the proposed method can classify each block by assigning a membership degree for handling decision-making problems encountered in conventional resource classification methods.     

Cloud resource prediction model based on triple exponential smoothing method and temporal convolutional network

The container cloud represented by Docker and Kubernetes has the advantages of less additional resource overhead and shorter start-up and destruction time.However there are still resource management issues such as over-supply and under-supply.In order to allow the Kubernetes cluster to respond “in advance” to the resource usage of the applications deployed on it,and then to schedule and allocate resources in a timely,accurate and dynamic manner based on the predicted value,a cloud resource prediction model based on triple exponential smoothing method and temporal convolutional network was proposed,based on historical data to predict future demand for resources.To find the optimal combination of parameters,the parameters were optimized using TPOT thought.Experiments on the CPU and memory of the Google dataset show that the model has better prediction performance than other models.     

基于一种改进逐点比较插补法的激光打标机控制加工算法

在激光打标系统中,逐点比较插补法是一种普遍使用的算法。这种算法在控制激光运动轨迹和对图像轨迹的拟合过程中,起到极其重要的作用。由于逐点比较插补法具有运算直观,脉冲输出均匀,调节方便等特点,所以是一种较为适合打标机系统应用的插补算法。但是传统的逐点比较插补算法存在精度低和速度慢等问题。为了改善该算法的性能,对传统逐点比较插补算法进行了改进,并进行了计算和模拟仿真。结果表明改进比较插补算法在精度和速度上都有明显提高。     

基于风速时间序列分形与传统插值对比研究

风速时间序列具有波动强烈、数学上处处连续、处处不可导特征,为解决风速时间序列的插值问题及提高其精度,采用数学分形学理论的分形插值方法,基于Kaimal和NWTCUP湍流风谱模型进行风场模拟。从得到的风速时间序列中随机抽取数据作为初始点,将分形插值方法与三次样条和Hermite传统插值方法进行对比。结果表明:分形插值方法不仅具有保持原始风速时间序列所具有的本质和内在联系,如自相似性、长程相关性和标度不变性等非线性动力学系统特征信息,而且比三次样条和Hermite传统插值方法更适合剧烈震荡的风速时间序列的插值。     

Nonlinear Factor-Augmented Predictive Regression Models with Functional Coefficients

This article introduces a new class of functional-coefficient predictive regression models, where the regressors consist of auto-regressors and latent factor regressors, and the coefficients vary with certain index variable. The unobservable factor regressors are estimated through imposing an approximate factor model on high dimensional exogenous variables and subsequently implementing the classical principal component analysis. With the estimated factor regressors, a local linear smoothing method is used to estimate the coefficient functions (with appropriate rotation) and obtain a one-step ahead nonlinear forecast of the response variable, and then a wild bootstrap procedure is introduced to construct the prediction interval. Under regularity conditions, the asymptotic properties of the proposed methods are derived, showing that the local linear estimator and the nonlinear forecast using the estimated factor regressors are asymptotically equivalent to those using the true latent factor regressors. The developed model and methodology are further generalized to the factor-augmented vector predictive regression with functional coefficients. Finally, some extensive simulation studies and an empirical application to forecast the UK inflation are given to examine the finite-sample performance of the proposed model and methodology.     

Robust Linear Interpolation and Extrapolation of Stationary Time Series in Lp

To deal with uncertainty of the spectral distribution, we consider minimax interpolation and extrapolation problems in L^p for stationary processes. The interpolation and extrapolation problems can be regarded as a linear approximation problem on the unit disk in the complex plane. Although the robust one-step-ahead predictor and interpolator has already been considered separately in the previous literature, we give two conditions for the uncertainty class to find the minimax interpolator and extrapolator in the general framework from both the point of view of the observation set and the point of view of evaluation on the interpolation and extrapolation error under the L^p-norm. We show that there exists a minimax interpolator and extrapolator for the class of spectral densities ε-contaminated by unknown spectral densities under our conditions. When the uncertainty class contains spectral distribution functions which are not absolutely continuous to the Lebesgue measure, we show that there exists an approximate interpolator and extrapolator in L^p such that its maximal interpolation and extrapolation error is arbitrarily close to the minimax error when the spectral distributions have densities. Our results are applicable to the stationary harmonizable stable processes.