基于Massive MIMO及频谱叠加的5G SA网络上行优化方法

大规模多输入多输出(Multiple-Input Multiple-Output, MIMO)可以有效提升5G SA网络的上行链路数据传输速率以及可靠性。针对5G SA网络上行链路速率和覆盖不均衡的情况,提出了基于大规模MIMO的分组算法,将发送信号矢量进行分组,组内采用最大似然检测,组外采用基于正交三角分解(QR分解)的干扰消除检测,并且结合5G频谱的叠加策略,在降低算法复杂度的同时,有效提升网络覆盖和速率。通过5G SA现网实测,通过MIMO降低分组数量能够提升分组检测性能,结合上行低频段频谱叠加策略能够有效提升5G SA网络上行覆盖30%,提升5G SA网络上行平均速率40%~80%,特别是弱覆盖边缘的网络速率,最高可达600%。     

Frequency response data-based peak filter design applied to MIMO large-scale high-precision scan stage

A large-scale high-precision scan stage is important equipment in the industrial productions of micro-fabrication such as flat panel display (FPD) lithography systems. Designing controllers for multi-input multi-output (MIMO) systems is time-consuming and needs experience because of the interaction between each axis and many controller tuning parameters. The aim of this study is to develop a peak filter design method based on frequency response data to reduce repetitive disturbance. This data-based approach does not use the model and only uses the frequency response data of the controlled system and the disturbance spectrum calculated from the scanning error data (Contribution 1). The peak filter is designed by convex optimization and satisfies robust stability conditions for six-degree-of-freedom systems (Contribution 2). The control performance of the designed peak filter is experimentally demonstrated with an industrial MIMO large-scale high-precision scan stage in reducing the scanning error of the main stroke of the translation along the $x$-axis (Contribution 3).     

基于SAOR的Massive MIMO系统信号检测算法

大规模多输入多输出(Massive multiple input multiple output, Massive MIMO)系统采用最小均方误差(Minimum mean square error, MMSE)接收检测方法时存在矩阵求逆复杂度高的问题，已有较多降低复杂度的研究。在降低检测算法复杂度的同时，如何提高算法收敛速度和检测性能一直是人们关注的焦点。本文将对称加速超松弛(Symmetric accelerated over-relaxation， SAOR)迭代算法应用于Massive MIMO系统信号检测中，避免了复杂的矩阵求逆计算，实现了复杂度较最小均方误差算法降低了一个数量级。仿真结果表明，基于SAOR的检测方法通过较少的迭代次数就能逼近最小均方误差（Minimum mean square error, MMSE）算法的检测性能，为Massive MIMO系统中接收信号的快速检测提供了较好的实现方法。     

A multilevel sampled‐data approach for resilient navigation and control of autonomous systems

Autonomous systems are rapidly becoming an integrated part of the modern life. Safe and secure navigation and control of these systems present significant challenges in the presence of uncertainties, physical failures, and cyber attacks. In this paper, we formulate a navigation and control problem for autonomous systems using a multilevel control structure, in which the high‐level reference commands are limited by a saturation function, whereas the low‐level controller tracks the reference by compensating for disturbances and uncertainties. For this purpose, we consider a class of nested, uncertain, multiple‐input–multiple‐output systems subject to reference command saturation, possibly with nonminimum phase zeros. A multirate output‐feedback adaptive controller is developed as the low‐level controller. The sampled‐data (SD) design of this controller facilitates the direct implementation on digital computers, where the input/output signals are available at discrete time instances with different sampling rates. In addition, stealthy zero‐dynamics attacks become detectable by considering a multirate SD formulation. Robust stability and performance of the overall closed‐loop system with command saturation and multirate adaptive control are analyzed. Simulation scenarios for navigation and control of a fixed‐wing drone under failures/attacks are provided to validate the theoretical findings.     

Performance analysis of large-scale MIMO system for wireless backhaul network

In this paper, we present a performance analysis of large-scale multi-input multi-output (MIMO) systems for wireless backhaul networks. We focus on fully connected N nodes in a wireless meshed and multi-hop network topology. We also consider a large number of antennas at both the receiver and transmitter. We investigate the transmission schemes to support fully connected N nodes for half-duplex and full-duplex transmission, analyze the achievable ergodic sum rate among N nodes, and propose a closed-form expression of the achievable ergodic sum rate for each scheme. Furthermore, we present numerical evaluation results and compare the resuts with closed-form expressions.     

Broadband MIMO Antenna System for 5G Operations in Mobile Phones

A broadband 8‐antenna multiple‐input and multiple‐output (MIMO) system working for 5G new radio N77 (3.3‐4.2 GHz) in mobile terminals is proposed. In particular, each antenna element/unit consists of a monopole‐type meandered branch and an inverted U‐shaped self‐isolated antenna branch; and the antenna unit is fed by the meandered branch. The antenna unit has two resonances generated separately by each branch of the antenna unit. Since the monopole couples strongly with the self‐isolated antenna element that has the inherent self‐isolation characteristics, quite good isolation for the broadband 8‐antenna MIMO system can be obtained. The results such as antenna efficiency, radiation patterns, envelope correlation coefficient, and channel capacity are also presented.     

基于改进飞蛾扑火优化算法的MIMO雷达相位编码信号集设计

提出一种MIMO雷达相位编码信号集设计方法，该方法对飞蛾扑火优化算法进行改进，利用改进的飞蛾扑火算法优化相位编码信号集，提高其正交性.在改进方法中，增加对火焰的更新过程，使火焰不仅能够保存最优飞蛾位置还具有搜索最优解的功能.优化过程以自相关函数旁瓣峰值和、互相关函数峰值和，以及自相关函数旁瓣能量、互相关函数能量作为算法适应度函数.仿真实验结果表明，改进方法明显提高了飞蛾扑火优化算法的收敛速度和收敛精度，且优化得到的信号集具有较低的自相关旁瓣值和互相关值.     

Triangular quad-port multi-polarized UWB MIMO antenna with enhanced isolation using neutralization ring

In this study, a quad-port multi-polarized ultra-wideband (UWB) multiple input multiple output (MIMO) antenna system with a new isolation technique is designed for wireless devices. The antenna structure consists of four triangular monopole elements and neutralization ring (NR) structures. The monopoles are back-to-back positioned in symmetrical and orthogonal arrangement. Therefore, they radiate towards four directions without interference, and thus the diversity performance is improved. A novel NR is formed by combining a rectangular ring and a straight line to reduce the mutual coupling due to interoperation of the elements. Each triangular monopole is fed by 50 Ohm microstrip transmission line (MTL) with a thin strip line for ensuring impedance matching. Antenna performance in terms of impedance bandwidth, current distribution, radiation pattern, peak gain and envelope correlation coefficient (ECC) is also investigated. The MIMO antenna system has 3.1–17.3 GHz impedance bandwidth, 1–5 dBi peak gain variation, less than 0.1 ECC. The results indicate that the proposed antenna has the characteristics of larger UWB bandwidth, high isolation by the NR structure, multi-polarization, uniform gain and quasi-omnidirectional pattern.     

Separable transmit beampattern design for MIMO radars with planar colocated antennas

Multiple-input multiple-output (MIMO) radar transmit beampattern design for one-dimensional arrays has been widely studied in literatures. In this paper, transmit beampattern design is considered for two-dimensional (2D) arrays. As the size of the array is increased, the computational complexity and time for pattern optimization are increased drastically. To overcome these problems, we introduced the conditions upon which the 2D beampattern design for uniform rectangular arrays (URA) can be achieved via the product of two perpendicular transmit beampatterns of uniform linear arrays (ULA). The transmit beampattern design is accomplished under special characteristics such as minimum integrated sidelobe level or special 3 dB beamwidth in azimuth and elevation with much lower computation time.