一类两性分枝过程条件均值增长率的极限性质

本文主要研究随机环境中配对依赖人口数两性 Galton-Watson 分枝过程的条件均值增长率的极限性质．利用上可加函数的性质，得到配对单元平均增长率的极限性质和该过程条件均值的上界和下界．文中给出了关于过程条件均值增长率的两个序列，利用配对单元平均增长率的性质，获得了这两个序列的极限性质．随机环境中配对依赖人口数两性分枝过程比较复杂，本文的结论推广了现有的研究成果．     

Mosquito sound communication: are male swarms loud enough to attract females?

Given the unsurpassed sound sensitivity of mosquitoes among arthropods and the sound source power required for long-range hearing, we investigated the distance over which female mosquitoes detect species-specific cues in the sound of station-keeping mating swarms. A common misunderstanding, that mosquitoes cannot hear at long range because their hearing organs are ‘particle-velocity’ receptors, has clouded the fact that particle velocity is an intrinsic component of sound whatever the distance to the sound source. We exposed free-flying Anopheles coluzzii females to pre-recorded sounds of male An. coluzzii and An. gambiae s.s. swarms over a range of natural sound levels. Sound levels tested were related to equivalent distances between the female and the swarm for a given number of males, enabling us to infer distances over which females might hear large male swarms. We show that females do not respond to swarm sound up to 48 dB sound pressure level (SPL) and that louder SPLs are not ecologically relevant for a swarm. Considering that swarms are the only mosquito sound source that would be loud enough to be heard at long range, we conclude that inter-mosquito acoustic communication is restricted to close-range pair interactions. We also showed that the sensitivity to sound in free-flying males is much enhanced compared to that of tethered ones.     

电气安装与土建施工的配合探讨

简述了电气安装与土建施工协调配合的重要性,根据多年工程实践,就电气安装与土建施工中的配合问题进行了深入探讨,以促进建筑工程各项工程施工中不同专业工程的协调性,更好地保证建筑物的质量。     

乌鞘岭特长隧道斜井快速施工机械配套技术

以乌鞘岭特长隧道 6号斜井为例 ,分析了特长隧道机械配套的主要原则和因素 ,并对机械设备的需用量进行了计算 ,提出了机械设备配套技术及其管理和应用技术。     

Pheromone responsiveness is regulated by components of the Gpr1p‐mediated glucose sensing pathway in Saccharomyces cerevisiae

Many fungi have evolved mechanisms to assess environmental nutrient availability prior to the energy‐intensive process of mating. In this study, we examined one such system in Saccharomyces cerevisiae, involving a glucose‐sensing pathway mediated by Gpr1p and the pheromone‐induced mating pathway. Initially we observed that the mating pathway in MATa cells is sensitive to environmental glucose depletion. This phenomenon can be partially reversed with a high glucose spike, but not with the addition of low levels of glucose. Deletion of the low‐affinity glucose receptor, Gpr1p, eliminated this glucose‐induced recovery of pheromone responsiveness. We then determined the impact of GPR1 deletion on the mating pathway and observed that, in all end points studied, the mating pathway response to pheromone is reduced in the absence of Gpr1p. Similarly, elimination of the Gα for Gpr1p, Gpa2p, resulted in reduction in pheromone sensitivity in all assays studied. The negative effect of removing Gpr1p on mating pathway activation could be recovered by overexpressing the mating receptor, Ste2p. Furthermore, Ste2p levels are reduced in the absence of glucose and GPR1. These data suggest that activity of the GPCR‐mediated mating pathway in S. cerevisiae is modulated by extracellular glucose concentrations through the only other GPCR in MATa cells, Gpr1p. Copyright © 2014 John Wiley & Sons, Ltd.     

Implicit and explicit preferences for physical attractiveness in a romantic partner: A double dissociation in predictive validity.

Five studies develop and examine the predictive validity of an implicit measure of the preference for physical attractiveness in a romantic partner. Three hypotheses were generally supported. First, 2 variants of the go/no-go association task revealed that participants, on average, demonstrate an implicit preference (i.e., a positive spontaneous affective reaction) for physical attractiveness in a romantic partner. Second, these implicit measures were not redundant with a traditional explicit measure: The correlation between these constructs was .00 on average, and the implicit measures revealed no reliable sex differences, unlike the explicit measure. Third, explicit and implicit measures exhibited a double dissociation in predictive validity. Specifically, explicit preferences predicted the extent to which attractiveness was associated with participants' romantic interest in opposite-sex photographs but not their romantic interest in real-life opposite-sex speed-daters or confederates. Implicit preferences showed the opposite pattern. This research extends prior work on implicit processes in romantic relationships and offers the first demonstration that any measure of a preference for a particular characteristic in a romantic partner (an implicit measure of physical attractiveness, in this case) predicts individuals' evaluation of live potential romantic partners. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Optimal design of stepped spillways using the HBMO algorithm

Studies on stepped spillways as flood energy dissipators have been conducted to understand the hydraulics on the stepped face of roller-compacted concrete dams as well as overlays of embankment dams. Significant energy losses occur along the stepped chute so that the energy dissipation structure becomes smaller and more economic. In addition, considering the design discharge, downstream face slope, height of spillway, different combinations of spillway width and number of spillway steps may lead to different head losses. In each feasible combination, the remaining head after the steps should be dissipated by downstream energy dissipators. Design and construction of spillways and energy disspators are very cost-consuming and build up a major part of the dam's construction expenses. Thus, the cost of a financially viable stepped spillway project that consists of the steps’ cost and downstream dissipator's cost should be minimised. In this paper, the honey-bee mating optimisation (HBMO) algorithm is used to determine the best combination of design variables so as to minimise the total cost of both spillway chute and stilling basin. Results are compared with those previously obtained by genetic algorithm (GA) and show the promising potential of the HBMO algorithm in this field of application.     

Breeding of lager yeast with Saccharomyces cerevisiae improves stress resistance and fermentation performance

Lager beer brewing relies on strains collectively known as Saccharomyces carlsbergensis, which are hybrids between S. cerevisiae and S. eubayanus‐like strains. Lager yeasts are particularly adapted to low‐temperature fermentations. Selection of new yeast strains for improved traits or fermentation performance is laborious, due to the allotetraploid nature of lager yeasts. Initially, we have generated new F1 hybrids by classical genetics, using spore clones of lager yeast and S. cerevisiae and complementation of auxotrophies of the single strains upon mating. These hybrids were improved on several parameters, including growth at elevated temperature and resistance against high osmolarity or high ethanol concentrations. Due to the uncertainty of chromosomal make‐up of lager yeast spore clones, we introduced molecular markers to analyse mating‐type composition by PCR. Based on these results, new hybrids between a lager and an ale yeast strain were isolated by micromanipulation. These hybrids were not subject to genetic modification. We generated and verified 13 hybrid strains. All of these hybrid strains showed improved stress resistance as seen in the ale parent, including improved survival at the end of fermentation. Importantly, some of the strains showed improved fermentation rates using 18°Plato at 18–25°C. Uniparental mitochondrial DNA inheritance was observed mostly from the S. cerevisiae parent. Copyright © 2012 John Wiley & Sons, Ltd.     

Facile synthesis of budding yeast a-factor and its use to synchronize cells of α mating type

The ease with which populations of the budding yeast Saccharomyces cerevisiae can be synchronized using the mating pheromone α-factor has been invaluable for studies of the cell cycle. The α-factor response pathway has also remained an important model to study the molecular mechanism of G-protein coupled receptor signalling. α-Factor is a 13 amino acids long peptide that is readily available by automated peptide synthesis. However, only cells of the a mating type respond to α-factor. Cells of the opposite α mating type respond to a-factor, a farnesylated and C-terminally methylated 12 amino acids peptide. Because of its more difficult chemical synthesis, a-factor is not readily available and consequently the a-factor response is less well understood. Here we describe an improved strategy for producing a-factor, based on solid-phase peptide synthesis, followed by two simple steps in solution that show favourable characteristics and good yield. We demonstrate the successful use of the resulting a-factor to synchronize cell cycle progression of α cells. Notably, the a-factor concentrations required for cell synchronization are an order of magnitude lower than typically used α-factor concentrations. Despite a similar cell cycle response, shmoo formation was less pronounced compared to α-factor-treated a cells. Our protocol makes a-factor widely accessible, extending the ease of cell cycle synchronization to budding yeast cells of both mating types and facilitating the study of a-factor signalling.     

Content-based assembly search: A step towards assembly reuse

The increased use of CAD systems by product development organizations has resulted in the creation of large databases of assemblies. This explosion of assembly data is likely to continue in the future. In many situations, a text-based search alone may not be sufficient to search for assemblies and it may be desirable to search for assemblies based on the content of the assembly models. The ability to perform content-based searches on these databases is expected to help the designers in the following two ways. First, it can facilitate the reuse of existing assembly designs, thereby reducing the design time. Second, a lot of useful designs for manufacturing, and assembly knowledge are implicitly embedded in existing assemblies. Therefore a capability to locate existing assemblies and examine them can be used as a learning tool by designers to learn from the existing assembly designs. This paper describes a system for performing content-based searches on assembly databases. We identify templates for comprehensive search definitions and describe algorithms to perform content-based searches for mechanical assemblies. We also illustrate the capabilities of our system through several examples.