阿尔泰南缘北塔山组火山岩锆石U-Pb定年及地质意义

新疆阿尔泰南缘北塔山组火山岩较为发育。本文对新疆阿尔泰南缘默色克奥依一带北塔山组火山岩进行地球化学分析和年代学研究。研究表明：U-Pb锆石年龄为（384.3±4.0Ma）Ma，为中泥盆世；该组火山岩属于钾质钙碱性系列，全碱（Na2O+K2O=2.07%-6.49%）和YiO2（0.24%-0.64%）含量较低，K2O含量（1.11%-4.04%）变化较大，稀土元素含量（∑REE）较低。稀土元素显示其轻稀土富集且分馏不明显；δEu值均大于1，为Eu富集型；δCe值均小于1，为Ce亏损型。该组火山岩微量元素P明显富集，K、Rb、Ba等大离子亲石元素（LILE）略富集，亏损Ta、Zr、Hf、Ti等高场强元素（HISF）。结合前人研究，本文认为默色克奥依一带北塔山组火山岩形成于岛弧及与俯冲过程有关的活动大陆边缘造山带环境，为泥盆纪古大洋俯冲消减过程中，俯冲板片脱水产生的流体交代上覆地幔楔部分熔融的产物。     

Reference governors and maximal output admissible sets for linear periodic systems

ABSTRACT

In this paper, we consider the problem of constraint management in Linear Periodic (LP) systems using Reference Governors (RG). First, we introduce the periodic-invariant maximal output admissible sets for LP systems. We extend the earlier results in the literature to Lyapunov stable LP systems with output constraints, which arise in RG applications. We show that, while the invariant sets for these systems may not be finitely determined, a finitely-determined inner approximation, which is periodically invariant, can be obtained by constraint tightening. We then analyze the geometric and algebraic relationship between these sets and show that these sets are related via simple transformations, implying that it suffices to compute only one of them for real-time applications. This greatly reduces the memory burden of RG (or other similar constraint management strategies), at the expense of an increase in processing requirements. We present a thorough analysis of this trade-off. In the second part of this paper, we present two RG formulations, and discuss their properties and algorithms for their computation. Numerical simulations demonstrate the efficacy of the approach.     

四川盆地震旦系灯影组丘滩体发育分布及对储层的控制

四川盆地震旦系灯影组储层主要发育于微生物丘滩体中，但不同成因类型丘滩体对储层的影响尚不明确。通过钻井岩心和野外露头观测、岩石薄片分析和物性测试等手段，将丘滩体划分为丘基、丘核、丘翼和丘坪4种微相，并根据微相的组合划分出台缘并进型丘滩体、台缘追补型丘滩体和台内饥饿型丘滩体3种丘滩体类型。台缘并进型丘滩体的生长速率快，与可容空间的增加速率相同步，其微相组合以"丘基+丘核"垂向加积为主，在海平面升降过程中易暴露于大气淡水环境，造成海水胶结作用弱、淡水溶蚀作用强，形成以格架溶蚀孔洞为主的储集空间，储层物性好，储集性能最优。台缘追补型丘滩体的生长速率次之，其早期的生长速率滞后于可容空间增长速率但后期逐渐同步，呈现出"丘基+丘核+丘翼/丘坪"侧向加积的微相组合；由于暴露于大气淡水环境的几率减小，其海水胶结作用强，淡水溶蚀作用减弱，储集性能稍差。台内饥饿型丘滩体的生长速率最慢，严重滞后于可容空间的增长速率，呈"云坪（丘基）+丘核+丘坪"微相组合，难以暴露于大气淡水环境，淡水溶蚀作用最弱，储集性能也最差。台缘带古地貌对丘滩体的生长速率影响较大，可控制丘滩体的沉积样式。陡坡台缘带有利于台缘并进型丘滩体发育，缓坡台缘带主要发育台缘追补型丘滩体，台内高地中发育台内饥饿型丘滩体。胡家坝-阆中-安岳地区一带的震旦系灯影组四段发育于典型的陡坡台缘带，是储层发育的最有利相带。     

基于间隔理论的过采样集成算法

针对传统集成算法不适用于不平衡数据分类的问题，提出基于间隔理论的AdaBoost算法（MOSBoost）。首先通过预训练得到原始样本的间隔；然后依据间隔排序对少类样本进行启发式复制，从而形成新的平衡样本集；最后将平衡样本集输入AdaBoost算法进行训练以得到最终集成分类器。在UCI数据集上进行测试实验，利用F-measure和G-mean两个准则对MOSBoost、AdaBoost、随机过采样AdaBoost（ROSBoost）和随机降采样AdaBoost（RDSBoost）四种算法进行评价。实验结果表明，MOSBoost算法分类性能优于其他三种算法，其中，相对于AdaBoost算法，MOSBoost算法在F-measure和G-mean准则下分别提升了8.4%和6.2%。     

A directional control method for interface flow considering static voltage stability

A directional control method (DCM) for power flows on a set of interface lines between two regions of power system considering static voltage stability margin is developed in this paper. A surface approximation approach is firstly used to obtain the relationship between the interface flow solution and the generation direction of generator (the portion of generation variation in each participating generator to satisfy the desired power increase on the interface and the system loss). Then, an optimization model is built to determine the optimum dispatching scheme of generators. This method not only can control the total power on the interface to satisfy the power demand but also can realize the directional control of power on each interface line based on the needs of operation. The proposed DCM is further extended to determine the optimum dispatching scheme of generators for maximizing the interface flow margin (IFM), which is the active power margin of the key transmission lines between two regions of power system constrained by static voltage stability. A modified continuation power flow (MCPF) is used to show and evaluate the impacts of the DCM on the IFM. The New England 39-bus system and the IEEE 300-bus system have been employed to verify the effectiveness of the DCM.     

采用泡沫铜电极的热再生氨电池性能数值模拟

以采用泡沫铜电极的热再生氨电池（thermally regenerative ammonia-based battery，TRAB）为研究对象，建立了多孔介质内物质传输与电化学反应耦合的稳态模型，计算获得了电池性能及多孔电极内物质传输特性，并研究了电解质浓度和电极孔隙率对电池性能的影响。研究结果表明，从主流区界面到多孔电极内部，阳极氨和阴极铜离子浓度逐渐降低，存在一定的浓度梯度，而且随着反应电流的增大，浓度梯度明显增大。在一定的范围内分别增大阳极氨浓度和阴极铜离子浓度，从主流区向多孔电极内物质传输增强，电池性能均能不断提升；随着硫酸铵浓度的增大，电解质电导率增大，电池性能逐渐提升，但增幅逐渐减小。此外，多孔电极孔隙率也会影响电池性能，本研究中TRAB在电极孔隙率为0.6时获得最高的最大功率(15.3 mW)。     

Quantitative relationship between time margin and human reliability

Operator reliability in complex systems is influenced by various performance shaping factors (PSFs). Time is a particularly important PSF; however, empirical studies of human reliability analysis (HRA) are rarely focused on modeling the effect of time PSF on human error probability (HEP). This study contributes to HRA literature by investigating the empirical relationship between time margin and HEP. Time margin is defined as the difference between the time available to complete a task and the time required to successfully complete the task, divided by the required time. We investigate and compare two models (logistic and linear) to explain HEP based on time margin. The empirical HEP data for model testing were extracted from a microworld simulator (Study 1) and a full-scope simulator (Study 2) in two existing studies relevant to procedural tasks in nuclear power plants. For Study 1, both models exhibited an acceptable, equivalent explanatory power; for Study 2, although both models exhibited an acceptable explanatory ability, the logistic model explained more variance in HEP. Our findings indicate the potential of the logistic model in explaining and predicting HEP based on time margin in time-critical tasks.     

南阳盆地北缘更新世以来的构造演化特征

南阳盆地是白垩纪晚期以来持续发育的断陷盆地，通过对南阳盆地钻孔及河流阶地的研究，并结合ESR测年方法，对南阳盆地北缘更新世以来的构造演化特征进行了分析。结果表明：研究区冲洪积层主要由全新统、上更新统、中更新统组成，分别构成了湍河的Ⅰ级、Ⅱ级、Ⅲ级阶地；中更新统以来，研究区垂直升降运动较为明显，湍河下蚀作用十分强烈，多级阶地的结构体现了更新世中晚期以来的总体持续下蚀过程，且时间和空间上表现出不均衡性，其下蚀速率由慢至快又逐渐减缓。     

Generalized phase compensator of continuous time plants

This work proposes a novel design method for generalized order lead/lag compensators. With respect to the traditional lead/lag compensator, it introduces a new parameter, β, which is a non-integer number. A new design method of the compensator is introduced in order to quantify its design parameters. Compared to its integer order counterpart, the generalized order lead compensator facilitates with the unique solution of desired design specifications with maximum phase at the desired gain cross-over frequency to achieve reshaping of the loop frequency domain characteristics. On the other hand, generalized order lag compensator is designed so as to allow minimum phase lag at the new gain crossover frequency. Examples with simulation and real-time results are presented to validate the efficacy of the proposed approach.     

Effect of working position and cold environment on muscle activation level and fatigue in the upper limb during manual work tasks

Several occupational groups are exposed to periods of low ambient temperatures while performing manual work tasks outdoors. Work tasks typically include heavy lifting, tool handling, and overhead work. This study evaluated the effect of working position and cold environment on muscle activation level (%RMS_max) and fatigue in the upper limb during manual work tasks. Fourteen male participants (25 ± 3 years, 80.9 ± 6.4 kg, 182 ± 5 cm) completed a 2-h test protocol consisting of five test periods alternating with four work periods, wearing identical sets of clothing, under cold (−15 °C) and control (5 °C) conditions. The work periods consisted of manual work at the hip level, manual overhead work, and a lifting exercise. The test periods consisted of isometric maximal voluntary contractions (MVC) and seated rest. Skin temperatures decreased during cold exposure, especially in the extremities. %RMS_max in the forearm was higher in the cold condition both during overhead work and work at the hip level than that for the same work in the control condition, especially at the end of the test when the difference was approximately 25% (equating to 2–3 %RMS_max). For the middle deltoid muscle, the %RMS_max was approximately three times (or 10 %RMS_max) higher during overhead work than work at the hip level, but there was no additional cost of working in the cold. Signs of deltoid muscle fatigue (decrease in electromyography median power frequency and an increase in %RMS_max) were observed during the overhead work periods in both temperature conditions. No decrease in MVC, as a sign of overall muscle fatigue, was observed in either condition.Relevance to industryThis study demonstrated that when wearing suitable cold-weather protective clothing, the adverse effect of work posture is much higher than that of cold on muscle demand and physical strain.