基于归一化水体指数及其阈值自适应算法的水体遥感反演效果分析

归一化水体指数（NDWI）是水体遥感反演的一种重要指标，其阈值及修正直接影响反演结果的精度。基于Landsat-8与GF-1光学多光谱影像，使用归一化水体指数法阈值0（TH₀）、最大类间方差法（OTSU）自适应阈值（TH_otsu）与均值漂移聚类算法（Mean-Shift）自适应阈值（TH_MS）分别对典型正常水体、云雾覆盖水体、富营养化水体、高含泥沙水体进行水体遥感提取与效果分析，结果表明：正常水体以TH₀为阈值提取精度最高，THMS提取精度次之，TH_otsu提取精度最差；而云雾覆盖水体、富营养化水体以及含泥沙水体使用THMS提取精度最高，尤其少量云雾覆盖下的水体，TH_MS具有更明显的优势，TH₀提取精度次之，TH_otsu提取精度最差；对于不同的阈值，Land?sat-8比GF-1总体表现出更高的水体提取精度。Mean-Shift算法应用于NDWI阈值修正与水体遥感反演具有快速、水质适应性强、效果稳定的优势，对尤其是复杂条件下的水体信息遥感反演具有较好的提取效果。     

贝叶斯网络查询语义扩展的专家发现方法

专家发现是实体检索领域的一个研究热点，针对经典专家发现模型存在索引术语独立性假设与检索性能低的缺陷，提出一种基于贝叶斯网络模型的专家发现方法。该方法模型采用四层网络结构，能够实现图形化的概率推理，同时运用词向量技术能够实现查询术语的语义扩展。实验结果显示该模型在多个评价指标上均优于经典专家发现模型，能够有效实现查询术语语义扩展，提高专家检索性能。     

基于并行多通道卷积长短时记忆网络的轴承寿命预测方法

在预测轴承剩余使用寿命时，数据间的时序特性是一个可以利用的重要隐藏信息。为了更好地提取具有时序信息的特征用于预测，提出了一种基于并行多通道卷积长短时记忆网络（PMCCNN-LSTM）的剩余使用寿命预测模型。该模型主要由两部分组成：前端为并行多通道卷积网络（PMCCNN），提取信号特征，挖掘数据的时序特性，并采用逐层训练和微调的方式提升参数的收敛性；后端为长短时记忆（LSTM）网络，基于特征进行剩余使用寿命预测，并采用加权平均的方法对预测结果进行平滑处理。在一个轴承加速寿命实验的公开数据集上使用留一法验证了该模型的准确性，实验结果表明：所提模型的平均误差与最大误差分别比传统的卷积神经网络（CNN）低23.38%和15.84%，比传统的LSTM低24.14%和19.01%，比卷积长短时记忆网络（CNN-LSTM）低30.32%和23.09%。     

小尺度交通信号灯的检测与状态识别

交通信号灯识别包括检测和状态识别，在智能交通系统中发挥重要作用。基于YOLOv3算法提出了一种交通信号灯检测与状态识别模型。针对交通信号灯相较于交通场景中其他目标具有尺度小的特性进行了算法的设计：降低骨干网络的下采样倍率以增加小尺度目标的特征描述能力；通过增大特征图的尺度来改进多尺度特征融合；引入广义交并比作为检测任务的损失函数来改进目标边界框的回归效果。同时，根据交通信号灯本身的特性，使用颜色和形状约束的方法对信号灯进行状态识别和类别验证。最后在公开的Bosch交通信号灯数据集上和实际的城区道路进行了实验验证。实验结果表明，所提出的算法能够提升交通信号灯识别的精度和召回率，识别准确率可以达到90%左右。     

基于RG 1.183的先进小堆选址源项模型初步研究

在《用于评估核动力反应堆设计基准事故的替代放射性源项》RG 1.183所述的假想事故场景情况下,考虑目前大多数的先进小型压水堆地上-地下布置的设计特点,对传统大型压水堆选址源项计算模型做了改进:在原安全壳内放射性物质守恒方程的基础上,考虑辅助厂房的阻滞作用,建立辅助厂房内放射性物质守恒方程。并以某先进小型反应堆核电厂为例,利用新模型计算了代表核素的释放,与现有模型进行了对比。     

Multiple Empirical Kernel Learning with Majority Projection for imbalanced problems

Traditional Multiple Empirical Kernel Learning (MEKL) expands the expressions of the sample and brings better classification ability by using different empirical kernels to map the original data space into multiple kernel spaces. To make MEKL suit for the imbalanced problems, this paper introduces a weight matrix and a regularization term into MEKL. The weight matrix assigns high misclassification cost to the minority samples to balanced misclassification cost between minority and majority class. The regularization term named Majority Projection (MP) is used to make the classification hyperplane fit the distribution shape of majority samples and enlarge the between-class distance of minority and majority class. The contributions of this work are: (i) assigning high cost to minority samples to deal with imbalanced problems, (ii) introducing a new regularization term to concern the property of data distribution, (iii) and modifying the original PAC-Bayes bound to test the error upper bound of MEKL-MP. Through analyzing the experimental results, the proposed MEKL-MP is well suited to the imbalanced problems and has lower generalization risk in accordance with the value of PAC-Bayes bound.     

Fermatean fuzzy linguistic set and its application in multicriteria decision making

In this paper, we propose the concept of Fermatean fuzzy linguistic term sets based on linguistic term sets and Fermatean fuzzy sets. The basic operational laws, the score function, and the accuracy function of Fermatean fuzzy linguistic numbers are provided. Then we propose the Fermatean fuzzy linguistic weighted aggregation operator, the Fermatean fuzzy linguistic weighted geometric operator, and the Fermatean fuzzy linguistic distance measures. Furthermore, we extend the TOPSIS method to the proposed distance measures, and the ranking of alternatives is obtained under a Fermatean fuzzy linguistic environment. An example is provided to illustrate the feasibility and effectiveness of the proposed method, and a comparison with the existing method is also analyzed. Finally, the sensitivity analysis of the parameter in the proposed distance measure is also discussed.     

Numerical investigation on the electronic components' cooling for different coolants by finite element method

In this study, we conducted a numerical simulation to examine the cooling performance of an aluminum finned heat sink attached to a silicon chip, placed in a chamber of a rectangular cross-section. The heat sink is cooled by convective heat transfer utilizing nine commercially available gaseous coolants, namely air, hydrogen, helium, nitrogen, oxygen, carbon dioxide, freon12 vapor, propane, and ammonia. To select an appropriate coolant for electronic devices in terms of thermal–hydraulic performance, the maximum temperature on the chip domain and the associated pressure drop in the cooling channel as a function of coolant velocity are analyzed for the aforementioned fluids. It has been found that the minimum temperature is recorded for propane and freon12 vapor, which is approximately 31.1°C, for a coolant velocity of 0.5 m/s, but freon12 vapor shows the highest pressure drop, approximately 900 mPa, among all coolants. In the overall velocity regime, hydrogen shows the best cooling performance in terms of both cooling capacity and hydrodynamic characteristics. But considering safety issues, helium can be a better alternative. This comprehensive study provides a better understanding of different coolant performances, which will aid engineers to develop an effective cooling technique to accommodate the inexorably rising power demand.     

径向弹簧蓄能密封结构最大接触应力的有限元分析

为研究径向弹簧蓄能密封结构的密封特性，针对典型径向弹簧蓄能密封结构，分析其密封机制以及O形弯曲金属螺旋弹簧的弹性特性；采用ANSYS有限元分析软件，建立典型弹簧蓄能密封结构的非线性有限元分析模型，对弹簧蓄能密封圈在不同压缩率、不同介质压力下的接触应力进行分析，研究在多种工况下最大接触应力的变化情况。结果表明：压缩率保持不变时，最大接触应力随着介质压力的增大而增大；介质压力保持不变时，随着压缩率的增大，最大接触应力先增大再减小。对压缩率、介质压力与最大接触应力的关系进行曲线拟合，可用于指导弹簧蓄能密封结构的精确设计。     

Destructive and non-destructive evaluation of concrete for optimum sand to aggregate volume ratio

Aggregates are the biggest contributor to concrete volume and are a crucial parameter in dictating its mechanical properties. As such, a detailed experimental investigation was carried out to evaluate the effect of sand-to-aggregate volume ratio (s/a) on the mechanical properties of concrete utilizing both destructive and non-destructive testing (employing UPV (ultrasonic pulse velocity) measurements). For investigation, standard cylindrical concrete samples were made with different s/a (0.36, 0.40, 0.44, 0.48, 0.52, and 0.56), cement content (340 and 450 kg/m³), water-to-cement ratio (0.45 and 0.50), and maximum aggregate size (12 and 19 mm). The effect of these design parameters on the 7, 14, and 28 d compressive strength, tensile strength, elastic modulus, and UPV of concrete were assessed. The careful analysis demonstrates that aggregate proportions and size need to be optimized for formulating mix designs; optimum ratios of s/a were found to be 0.40 and 0.44 for the maximum aggregate size of 12 and 19 mm, respectively, irrespective of the W/C (water-to-cement) and cement content.