A numerical model to predict the powder–binder separation during micro-powder injection molding

The micro-powder injection molding (micro-PIM) process has the potential to bridge the gap between the design and manufacturing of micro-components that are often used in small and handy devices. Numerical modeling helps to analyze and overcome various difficulties of micro-PIM. In the present work, a numerical model is developed to predict the powder–binder separation (a common defect in PIM and especially severe in micro-PIM) during the injection of an alumina feedstock. A powder–binder separation criterion is proposed dealing with applied injection pressure and friction force between the powder and binder. An indirect comparison of feedstock travel time between two locations is used to validate the model. The predicted segregation from the simulated result is supported by a qualitative experimental measurement. The developed model can be used to optimize injection parameters to get a defect-free product.     

Micron-sized silica mesh for enhancing the performance of quantum dot sensitized solar cells

Three dimensional silica mesh structures are prepared through a new and simple method for enhancing the quantum dot sensitized solar cells performance and stability.Silica patterns are made on the top of the TiO₂ photoanodes and a marked improvement in light scattering properties of meshed structures is confirmed by diffuse reflectance spectroscopy measurements. This improvement enhances the current density and consequently the cells ‘efficiency. Parameters of electron transport in cells are explored by electrochemical impedance spectroscopy (EIS). According to the EIS results, silica mesh declines the recombination rate in cells in a clear way. Here more than 50% efficiency improvement is obtained in meshed structures in comparison to cells with normal TiO₂ photoanode structures. The insulated silica mesh, reduces the electrolyte's deleterious effect on the semiconductor layers and the cells’ stability is improved.     

基于虚拟现实的复杂场景加载优化算法

目前大规模场景模型生成的需求量日益增加, 现提出了一种基于区域的自动 LOD (Levels Of Details)构建算法. 该算法基于动态网格简化算法, 在游戏设计制作的过程中, 游戏开发人员会经常需要对美工部门人员提供的模型进行优化. 为了可以使模型的面数得到简化, 并且不改变模型的外观. 当今流行的 LOD技术非常擅于处理这种情况, 判断模型与摄像机的距离如果超过一定范围之后, 自动调取不同层次的模型, 当模型距离摄像机很远的情况下使用面数低的模型替换高模, 这样可以提高帧率并且降低摄像机前的三角面以及顶点数从而减少渲染压力. 一般模型的简化分为静态和动态模型的简化.大部分情况下, 程序员会让美工部门提供几套不同面数的模型或者通过模型简化工具对高模进行减面并存成多个Mesh, 并在程序运行的时候, 根据模型与摄像机的距离远近动态的替换Mesh. 这是一种静态的方法.这里将尝试使用一种动态的网格简化和LOD技术相结合的方法. 这种新型算法的大大的简化了操作流程, 美术人员只需要提供一个模型, 程序员可以使用这种方法生成量级不同的低模, 根据摄像机与模型的远近自动的调取不同精度的模型.     

高强不锈钢绞线网与ECC黏结-滑移关系模型

高强不锈钢绞线网与ECC的黏结是二者协同工作的基础，且黏结 滑移关系模型是其黏结性能的综合反映，故通过对17组51个高强不锈钢绞网增强ECC薄板试件进行单边拉拔试验，研究横向钢绞线间距、纵向钢绞线直径和相对锚固长度等因素对钢绞线网在ECC中黏结性能的影响规律。试验结果表明，横向钢绞线的设置可使黏结破坏由脆性破坏转变为延性破坏；高强不锈钢绞线网与ECC的黏结滑移曲线可分为5个阶段，分别为上升段、微降段、延性强化段、下降段和残余段。基于试验结果，对钢绞线网在ECC中的黏结破坏特征和黏结 滑移机理进行分析，在相关黏结-滑移关系模型的基础上，提出钢绞线网与ECC的黏结 滑移关系模型，并进行模型参数分析。所提模型及模型参数计算公式与试验结果吻合良好，能较好地反映钢绞线网与ECC的界面黏结滑移特征。     

Performance analysis of large-scale MIMO system for wireless backhaul network

In this paper, we present a performance analysis of large-scale multi-input multi-output (MIMO) systems for wireless backhaul networks. We focus on fully connected N nodes in a wireless meshed and multi-hop network topology. We also consider a large number of antennas at both the receiver and transmitter. We investigate the transmission schemes to support fully connected N nodes for half-duplex and full-duplex transmission, analyze the achievable ergodic sum rate among N nodes, and propose a closed-form expression of the achievable ergodic sum rate for each scheme. Furthermore, we present numerical evaluation results and compare the resuts with closed-form expressions.     

The effect of fabric structure on the bursting characteristics of warp-knitted surgical mesh

Abstract

Surgical mesh is a porous fabric that is mainly produced from polymeric monofilaments using the warp-knitting method. Surgical mesh is used for healing hernia. Among the mechanical properties of the mesh, tensile and bursting strength have special significance. In this research, warp-knitted surgical meshes with five structures have been produced using polypropylene monofilament, and the effect of the fabric structure on the bursting characteristics of them has been investigated. All the meshes exhibited supraphysiologic bursting strength. quasi-Sandfly mesh demonstrated the highest, while quasi-Marqussite mesh exhibited the least bursting characteristics. The increase in the bursting characteristics of the meshes is attributed to the increase in the areal density and decrease in the porosity of them. Moreover, conformity between the bursting and tensile properties of them in bias direction has been observed. Overall, quasi-Marqussite mesh was proposed as the most desirable mesh in terms of porosity, weight, and bursting characteristics.     

某型发动机自反馈调节阀动态仿真分析

基于FLUENT软件提供的计算方法和物理模型，利用动网格技术及用户自定义函数（User-define Function，UDF），对发动机预燃室调节阀的自反馈调节过程进行动态数值模拟，并分析阻尼参数对调节效果的影响。结果表明：自反馈机构可实现对不同压力扰动的及时响应，具有稳定流量的效果，改变阻尼参数可对调节响应速度和流量稳定性进行优化，其中摩擦力对调节影响最显著。     

网状结构织物制备与应用研究进展

为深入拓展网状结构织物在实际工程中的应用,分别介绍了近年来机织网状结构织物、针织网状结构织物和编织网状结构织物的应用基础和制备方法。从纤维原材料、织物组织结构和织物后整理方面重点阐述了网状结构织物的力学性能和仿真模拟的研究进展。针对网状结构织物应用领域的不断扩大,进一步探索了网状结构织物的力学性能,增强网状结构织物的动态模拟,提高网类材料的使用寿命、减少能耗,以使网状结构织物的性能和使用效果逐渐提升。结合当前科技发展趋势,预测网状结构织物将会在海洋、建筑、航空航天等领域方向有更深入的发展,期望为网状结构织物产品的研发提供参考。     

A discontinuous least-squares finite-element method for second-order elliptic equations

In this paper, a discontinuous least-squares (DLS) finite-element method is introduced. The novelty of this work is twofold, to develop a DLS formulation that works for general polytopal meshes and to provide rigorous error analysis for it. This new method provides accurate approximations for both the primal and the flux variables. We obtain optimal-order error estimates for both the primal and the flux variables. Numerical examples are tested for polynomials up to degree 4 on non-triangular meshes, i.e. on rectangular and hexagonal meshes.     

限制失真的网格参数化方法

针对当前网格参数化效率较低、映射失真较严重的问题，提出一种限制失真的网格参数化方法。首先，预处理原始网格模型。输入原3D网格模型，采用Half-Edge数据结构来重新组织网格并切割网格模型产生相应的切缝；构建Tutte映射把3D网格映射到一个2D凸多边形域，即构建2D网格模型。然后，进行限制失真的网格参数化计算。将Tutte映射后的2D网格模型作为限制失真计算的初始数据，建立相对于原3D模型网格的失真度量函数；求得该度量函数的最小值点，即为映射后的网格坐标集合；将映射后的网格作为限制失真映射的输入网格，设定迭代终止条件，循环迭代直至迭代结束，得到收敛的最优网格坐标；在计算映射失真度时，针对等距映射失真采用Dirichlet能量函数度量，针对共形映射失真采用尽可能等距（MIPS）能量函数度量；在求解映射失真度量函数的最小值点时采用代理函数法结合组合牛顿法的最优解方法。最终，实现了该方法并开发了一个原型系统。在原型系统中，分别设计了限制等距失真和限制共形失真的网格参数化实验，对程序执行时间和失真能量下降情况进行了统计和对比，提供了相应的纹理映射效果展示。实验数据表明，所提出的方法执行效率高、映射失真能量下降快，最优值收敛质量稳定；纹理映射时纹理着色均匀、布局紧致、线条均匀，符合实际应用的标准。