一种基于抽取LMS的距离旁瓣抑制方法

在噪声雷达中，传统相关处理方法的距离旁瓣受到时宽带宽积的限制，在有限相关处理时间内得到的距离旁瓣较高，会造成微弱目标被强目标、杂波旁瓣淹没的现象。提出一种基于抽取最小均方（Least Mean Square,LMS）滤波的噪声雷达旁瓣抑制方法，将LMS滤波器的系数作为距离压缩结果，从而获取较低的距离旁瓣。对该方法的性能进行了理论分析，并通过数字仿真验证了算法的有效性和理论分析的正确性。     

基于平均飞行航迹的CCO减噪效用研究

近年来，通过优化飞行程序降低机场飞机噪声影响成为机场环境保护的重要研究方向。文章首先建立了基于飞机“噪声-功率-距离”数据的噪声计算模型，介绍了平均飞行航迹以及连续爬升运行(Continuous Climb Opera-tion, CCO)离场程序的相关理论，最后以大型国际机场为实例，使用飞机平均飞行航迹进行噪声预测，运用综合噪声模型计算出噪声影响面积并绘制噪声影响等值线图，比较了CCO离场相对常规的标准仪表离场(Standard Instru-ment Departure, SID)的降噪效果。结果表明，CCO离场程序可有效降低机场噪声影响，在高噪声级影响区域的降噪效果更佳。     

Adaptive investigation of the optical properties of polymer fibers from mixing noisy phase shifting microinterferograms using deep learning algorithms

In this article, an adaptive denoising method is suggested to accurate investigate the optical and structural features of polymeric fibers from noisy phase shifting microinterferograms. The mixed class of noise that may produce in the phase-shifting interferometric techniques is established. To our knowledge, this is an early study considered the mixing noises that may occur in microinterferograms. The suggested method utilized the convolution neural networks to detect the noise class and then denoising, it according to its class. Four convolution neural networks (Googlenet, VGG-19, Alexnet, and Alexnet–SVM) are refined to perform the automatic classification process for the noise class in the established data set. The network with the highest validation and testing accuracy of these networks is considered to apply the suggested method on realistic noisy microinterferograms for polymeric fibers, polypropylene and antimicrobial polyethylene terephthalate)/titanium dioxide, recoded using interference microscope. Also, the suggested method is applied on noisy microinterferograms include crazing and nanocomposite material. The demodulated phase maps and the three-dimensional birefringence profiles are calculated for tested fibers according to the suggested method. The obtained results are compared with the published data for these fibers and found to be in good agreements.     

基于Matlab的量子激光雷达稳频通信模拟系统设计

传统通信模拟系统设计较为复杂,导致模拟过程消耗能量较大,不能准确模拟稳频通信质量。因此,提出基于Matlab的量子激光雷达稳频通信模拟系统。由于振荡器是雷达形成初始信号源的基础,通过分析振荡电路与相位噪声,获得相位噪声函数与通信频率存在的关系;为确保通信过程的稳定,将准确性与稳定性作为信号质量的评价指标,并采用锁频环稳频技术计算频率偏移程度,根据PID控制算法控制频率,量子激光雷达稳频通信;利用Matlab确定激光器、探测器等硬件组成结构,通过时序与数字阵列的设置完成模拟系统设计。仿真结果表明所提系统结构简便、性能稳定,能够真实模拟出稳频通信的信号质量。     

应用于光遗传学的集成式注入型生物光电极器件的研究进展

光遗传学是一门涉及神经科学、光学、半导体光电子学及生物医学的交叉科学.把光作为一种遗传学的研究工具,可为神经科学研究提供更高效、精准的神经调控手段,也为临床精神疾病的研究和治疗提供了新的思路.集成式注入型生物光电极是一种集刺激神经元的光源与采集生物电信号的微电极于一体的多功能生物微探针,在利用活体生物进行的光遗传学研究中有着重要的应用.文章回顾了光遗传学的历史,对集成式注入型生物光电极器件的分类和发展进行了分析,详细比较了不同类型光电极器件在结构和性能上的差异,从电学特性、噪声信号、生物兼容性及可靠性等方面进行评价.最后,对光电极器件的未来发展进行了初步的探讨.     

基于LP与小波包的复杂机电系统监测序列混沌降噪方法

针对流程工业生产系统监测数据存在强噪声和混沌性的特点,提出了一种局部投影方法(Local Projection Method)与小波包方法相结合的信号降噪方法。该方法先利用局部投影方法从动力学系统嵌入流形的角度进行多次迭代降噪,并根据关联维数来判定迭代终止;再利用小波包方法从频率的角度进行降噪,抑制高频噪声的干扰,取得了较好的降噪效果。用Lorenz时间序列进行仿真验证,对仿真时间序列加入不同程度的噪声,对比分析小波包、局部投影与该方法降噪后的相空间、SNR值和最大Lyapunov指数,证明了该方法对于中高强度噪声具有更好的降噪效果。并将该方法用于某压缩机组的实际监测数据降噪,评估三种方法的降噪效果,进一步验证了该方法的优越性。     

Stochastic stabilization and destabilization of nonlinear and time‐varying hybrid systems by noise

The aim of this article is to design a suitable strength function g(t,x,r(t)) such that the Wiener noise g(t,x(t),r(t))dw(t) either stabilizes or destabilizes a given nonlinear and time‐varying hybrid system . To this end, the basic properties, including the existence and uniqueness of the local and global solutions and the nonzero property of solutions of the nonlinear and time‐varying hybrid stochastic systems, are first investigated as the theoretical basis of the article. Second, two theorems and the corresponding corollaries on the stability and instability of the hybrid stochastic systems are established. Third, the design method for the noise strength g(t,x,r(t)) is then proposed based on the established theorems. We also point out that the Markov jump r(t) may have a stabilizing (respectively, destabilizing) effect when we design the noise strength g(t,x,r(t)) so that the introduced noise g(t,x(t),r(t))dw(t) stabilizes (respectively, destabilizes) the corresponding hybrid system. Finally, we illustrate our method using two examples. Compared with the existing literature, our method is suitable for a wider class of nonlinear and time‐varying systems with weaker conditions than quasi‐linear systems.     

Effect of hydroxy gas enrichment on vibration,noise and combustion characteristics of a diesel engine fueled with Foeniculum vulgare oil biodiesel and diesel fuel

Gaseous fuels can be used in diesel engines to improve combustion and obtain more favorable emission. Vibration and noise formation in diesel engines is a rather complex phenomenon which is created during combustion of fuels and leads to a reduction in vehicle comfort. Although there are studies in the literature that examine the noise and vibration of the diesel engine using different biofuels, there is no study that thoroughly examines the effect of combined utilization of Foeniculum vulgare oil biodiesel (FVB) and hydroxy gas (HHO) on vibration, noise and combustion characteristics. Therefore, this study aimed to explore the effects of FVB, a promising biodiesel feedstock, and HHO dual fuel operation on vibration, noise and exhaust emissions of a diesel engine. The vibration, noise and emission data obtained by the use of diesel fuel were taken as a reference and the effects of FVB and HHO mixture utilization on vibration, noise and emission formation were examined. The results show that the total vibration and noise generated by the engine was decreased by the use of FVB. In addition, the utilization of HHO together with biodiesel further reduced the engine vibration and noise according to experimental data. According to exhaust emission formation measurements, the minimum carbon monoxide values were obtained when the engine was fueled with HHO and FVB mixtures. However, CO₂ and NO_X emissions increased with the combination of HHO and FVB usage.     

A low power and low phase-noise 91~96 GHz VCO in 90 nm CMOS

This paper reports a 94 GHz CMOS voltage-controlled oscillator (VCO) using both the negative capacitance (NC) technique and series-peaking output power and phase noise (PN) enhancement technique. NC is achieved by adding two variable LC networks to the source nodes of the active circuit of the VCO. NMOSFET varicaps are adopted as the required capacitors of the LC networks. In comparison with the conventional one, the proposed active circuit substantially decreases the input capacitance (C_in) to zero or even a negative value. This leads to operation (or oscillation) frequency (OF) increase and tuning range (TR) enhancement of the VCO. The VCO dissipates 8.3 mW at 1 V supply. The measured TR of the VCO is 91~96 GHz, close to the simulated (92.1~96.7 GHz) and the calculated one (92.2~98.2 GHz). In addition, at 1 MHz offset from 95.16 GHz, the VCO attains an excellent PN of – 98.3 dBc/Hz. This leads to a figure-of-merit (FOM) of ?188.5 dBc/Hz, a remarkable result for a V- or W-band CMOS VCO. The chip size of the VCO is 0.75 × 0.42 mm², i.e. 0.315 mm².     

地面微地震有源噪声自动识别与匹配压制方法

微地震监测技术通过对非常规储层压裂改造引发的震源点进行成像，实时提供压裂施工过程中产生的裂隙高度、长度、宽度和方位角等信息，为致密储层压裂提供指导，以提高油气采收率。在地面布设站点进行监测时，因微地震信号传播距离较远、近地表吸收衰减严重、地面有源噪声较多，微地震数据具有信号能量弱、噪声干扰强和信噪比低等特点，严重制约微地震事件的定位精度。噪声源多分布于地表，根据有源噪声与由储层向上传播的微地震事件在能量、频率、传播速度和源位置等方面的差异，本文提出微地震有源噪声自动识别与匹配方法。综合长短时窗能量比与微地震量板方法，自动识别有源噪声干扰，并进行噪声源位置和传播速度的三维最优并行搜索；利用同时确定的最优噪声源位置和传播速度对微地震数据进行动校正处理，得到噪声标准道，通过能量自适应匹配处理压制有源噪声。正演模拟数据和实际微地震数据去噪效果证明，本文方法能有效压制有源噪声，显著提高微地震数据品质，为后续微地震事件精确定位奠定了基础。