Local toolpath smoothing for five-axis machine tools

When five axis CNC machine tools follow series linear toolpath segments, the drives experience velocity, acceleration and jerk discontinuities at the block transition points. The discontinuities result in fluctuations on machine tool motions which lead to poor surface quality. This paper proposes to insert quintic and septic micro-splines for the tool tip and tool-orientation, respectively, at the adjacent linear toolpath segments. Optimal control points are calculated for position and orientation splines to achieve C³ continuity at the junctions while respecting user-defined tolerance limits. The geometrically smoothed corners are traveled at a smoothly varying feed with cubic acceleration trajectory profile. The proposed method is experimentally demonstrated to show improvements in motion smoothness and tracking accuracy in five-axis machining of free-form surfaces found in dies, molds and aerospace parts.     

基于关键路径延时检测的自适应电压缩减技术

为了减小传统的最差情况设计方法引入的电压裕量,提出了一种变化可知的自适应电压缩减(AVS)技术,通过调整电源电压来降低电路功耗.自适应电压缩减技术基于检测关键路径的延时变化,基于此设计了一款预错误原位延时检测电路,可以检测关键路径延时并输出预错误信号,进而控制单元可根据反馈回的预错误信号的个数调整系统电压.本芯片采用SMIC180 nm工艺设计验证,仿真分析表明,采用自适应电压缩减技术后,4个目标验证电路分别节省功耗12.4％,11.3％,10.4％和11.6％.     

Electromagnetism-like algorithms for optimized tool path planning in 5-axis flank machining

Optimization of tool path planning using metaheuristic algorithms such as ant colony systems (ACS) and particle swarm optimization (PSO) provides a feasible approach to reduce geometrical machining errors in 5-axis flank machining of ruled surfaces. The optimal solutions of these algorithms exhibit an unsatisfactory quality in a high-dimensional search space. In this study, various algorithms derived from the electromagnetism-like mechanism (EM) were applied. The test results of representative surfaces showed that all EM-based methods yield more effective optimal solutions than does PSO, despite a longer search time. A new EM-MSS (electromagnetism-like mechanism with move solution screening) algorithm produces the most favorable results by ensuring the continuous improvement of new searches. Incorporating an SPSA (simultaneous perturbation stochastic approximation) technique further improves the search results with effective initial solutions. This work enhances the practical values of tool path planning by providing a satisfactory machining quality.     

Tracking the mind during reading: The influence of past, present, and future words on fixation durations.

Reading requires the orchestration of visual, attentional, language-related, and oculomotor processing constraints. This study replicates previous effects of frequency, predictability, and length of fixated words on fixation durations in natural reading and demonstrates new effects of these variables related to 144 sentences. Such evidence for distributed processing of words across fixation durations challenges psycholinguistic immediacy-of-processing and eye-mind assumptions. Most of the time the mind processes several words in parallel at different perceptual and cognitive levels. Eye movements can help to unravel these processes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

移动机器人路径规划方法研究

移动机器人技术研究中的一个重要领域是路径规划技术，它分为基于模型的环境已知的全局路径规划和基于传感器的环境未知的局部路径规划。综述了移动机器人路径规划技术的发展现状指出了各种方法的优点与不足，最后对移动机器人路径规划技术的发展趋势进行了展望。     

基于击键动力学和口令的双因素用户验证

提出基于击键动力学和口令的一种新的身份验证方法，该方法监视用户在输入口令时的用户击键特征的有关数据，通过采用监视键盘输入时一种新的三键持续时间的击键特征表示，用一种表示用户节奏的相对击键速度的距离衡量方式，在正常样本上建立用户模式，然后用新样本与用户模式的距离匹配情况来验证用户身份的合法性。实验表明该方法简单实用，识别效率高。     

中国工程勘察设计咨询业产业整合的路径选择

产业是由具有相互联系、相互制约的若干组成部分结合在一起并且有特定动能的有机体,产业分工越合理,资金、人力资源和各种自然资源与物质资料在产业内发挥的功能越大;中国工程勘察设计业的产业结构“中间大,两头小”,产业内部资源分布极不合理;结构调整的最佳选择是以工程项目总承包和分包为分工协作的垂直一体化:分化重组中间的工程咨询单位,组建顶端的EPC工程公司,发展低端的专业咨询公司、事务所。     

一种新的机器人手臂控制方法

从机器人手臂的关节电机力学出发，本文提出了一种独立于现行机器人关节控制器的离线补偿方法，通过对－２自由度机器人的数值研究，证明该法不仅能有效地克服由于惯性负载，关节间耦合与重力效应给控制系统带来的动态精度问题，而且还可以消除由于控制系统本身的固有特性所决定的系统的跟踪误差。     

Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

Impact of dams on point bar habitat: a case for the extirpation of the Sacramento Valley Tiger Beetle,C. hirticollis abrupta

Quantitative analyses of flow and stage data, remote sensing and geographic information systems analysis, and field studies were used to assess the impact of dams and diversions on the point bar habitat of the Sacramento Valley Tiger Beetle (Cicindela hirticollis abrupta). The reaches of interest include sites of known historic populations of C. h. abrupta along the Sacramento River from approximately 8 km north of Colusa southward to the confluence with the Feather River and along the Feather River between Yuba City and its confluence with the Sacramento River. The results from this study show that construction of two major dams has altered flows such that prolonged and increased flows during summer, fall, and early winter have most likely disrupted life cycles, flooded larvae, drowned overwintering adults and led to high mortality. Additionally, habitat availability has decreased over time because point bars have decreased in number and area causing increased distances between populations and isolation of populations. Moreover, point bar armouring, channel scouring, altered flows, redirected flows through weirs, and lithologic controls have produced a bimodal distribution of mean grain sizes in the Sacramento River in which the more northern bars contain gravel deposits and more southern bars possess fine sands. These conditions negatively alter moisture retention and sediment compaction and, consequently, burrowing conditions needed by this tiger beetle. Additionally, more stabilized flows (reduced variability) and increased fine‐grained deposition have enabled development and encroachment of vegetation onto the sand bars. Finally, human stresses, such as foot traffic and vehicular traffic may have interfered with burrowing, ovipositing, and foraging. The combination of these stress factors has most likely led to a reduction in source populations and, ultimately, the apparent extirpation of the entire metapopulation. Copyright © 2006 John Wiley & Sons, Ltd.