Directional separation of hydrogen-containing gas mixture by hydrate-membrane coupling method

Recovery of hydrogen (H₂) from H₂-containing gas mixtures has great significance for energy conservation, cost reduction and benefit increase. However, the common separation methods have the ubiquitous problem due to phase equilibrium principle and results in the conflict between H₂ concentration and H₂ recovery rate in the product gas. Consequently, an innovative conception of hydrate-membrane coupling approach is proposed in this work. In the separation process, hydration and membrane permeation two separation driving forces coexist to achieve the aim of strengthening mass transfer kinetics. H₂ and non-H₂ components (hydrocarbons) are synchronously and directionally selected by membrane and hydrate to improve different phase compositions. Therefore, the gas in feed side could keep relatively high two separation driving forces (H₂ fugacity and hydrocarbons fugacity). The results show that the coupling method could synchronously increase both the concentration and the recovery rate of H₂ in the product gas. At the same time, the volume and concentration of the hydrocarbons in hydrate both increases effectively. It indicates that hydrate and membrane separation methods support each other in the separation process. The hydrate-membrane coupling method fundamentally solves the issue of the decreasing driving force resulting from single separation method and phase equilibrium relationship.     

Breeding schemes with optimum-contribution selection or truncation selection for beef cattle destined for use on dairy females

We tested the hypothesis that the size of a beef cattle population destined for use on dairy females is smaller under optimum-contribution selection (OCS) than under truncation selection (TRS) at the same genetic gain (ΔG) and the same rate of inbreeding (ΔF). We used stochastic simulation to estimate true ΔG realized at a 0.005 ΔF in breeding schemes with OCS or TRS. The schemes for the beef cattle population also differed in the number of purebred offspring per dam and the total number of purebred offspring per generation. Dams of the next generation were exclusively selected among the one-year-old heifers. All dams were donors for embryo transfer and produced a maximum of 5 or 10 offspring. The total number of purebred offspring per generation was: 400, 800, 1,600 or 4,000 calves, and it was used as a measure of population size. Rate of inbreeding was predicted and controlled using pedigree relationships. Each OCS (TRS) scheme was simulated for 10 discrete generations and replicated 100 (200) times. The OCS scheme and the TRS scheme with a maximum of 10 offspring per dam required approximately 783 and 1,257 purebred offspring per generation to realize a true ΔG of €14 and a ΔF of 0.005 per generation. Schemes with a maximum of 5 offspring per dam required more purebred offspring per generation to realize a similar true ΔG and a similar ΔF. Our results show that OCS and multiple ovulation and embryo transfer act on selection intensity through different mechanisms to achieve fewer selection candidates and fewer selected sires and dams than under TRS at the same ΔG and a fixed ΔF. Therefore, we advocate the use of a breeding scheme with OCS and multiple ovulation and embryo transfer for beef cattle destined for use on dairy females because it is favorable both from an economic perspective and a carbon footprint perspective.     

The dynamics of systems integration: Balancing stability and change on London's Crossrail project

Systems integration is essential for the design and execution of large, complex projects, but relatively little is known about how this task develops over time during the life cycle of a project. This paper builds on the concept of “disciplined flexibility” to describe how systems integration can be conceived as a dynamic process of maintaining stability, while responding flexibly to changing conditions. We examine the dynamics of systems integration through a case-study of Crossrail, the construction of London's new urban railway system, which will be called the Elizabeth Line when it opens for service. The balancing act of stability and change manifests during critical periods of the project life cycle as various interdependent systems evolve with different degrees of maturity. We identify how various types of reciprocal interdependencies in complex projects such as Crossrail – at the system and system of systems levels – require ongoing monitoring and control, and the mutual adjustment of tasks.     

高职模具类人才培养新模式的研究与实践

为了解决传统教学无法全面培养人才的问题,采用"课程融合+时空耦合+过程结合"的方式开展人才培养研究。以注射模设计与制造生产过程为导向,构建大项目牵引下的跨越课程、跨越学期的课程融合新模式,利用信息通信技术及互联网平台,将互联网与传统教学进行深度融合,创造新的教学生态,构建多元多维互动的时空耦合教学新关系,以全方位评价为引导,构建课程多元多维的评价新机制。以3个班级为对象开展不同模式下的教学,对试验班级成绩进行分析,研究结果表明:课程融合+时空耦合+过程结合新模式培养的学生更好地完成了综合项目,获得了较好的教学效果。     

Sofosbuvir Selects for Drug-Resistant Amino Acid Variants in the Zika Virus RNA-Dependent RNA-Polymerase Complex In Vitro

The nucleotide analog sofosbuvir, licensed for the treatment of hepatitis C, recently revealed activity against the Zika virus (ZIKV) in vitro and in animal models. However, the ZIKV genetic barrier to sofosbuvir has not yet been characterized. In this study, in vitro selection experiments were performed in infected human hepatoma cell lines. Increasing drug pressure significantly delayed viral breakthrough (p = 0.029). A double mutant in the NS5 gene (V360L/V607I) emerged in 3 independent experiments at 40–80 µM sofosbuvir resulting in a 3.9 ± 0.9-fold half- maximal inhibitory concentration (IC₅₀) shift with respect to the wild type (WT) virus. A triple mutant (C269Y/V360L/V607I), detected in one experiment at 80 µM, conferred a 6.8-fold IC₅₀ shift with respect to the WT. Molecular dynamics simulations confirmed that the double mutant V360L/V607I impacts the binding mode of sofosbuvir, supporting its role in sofosbuvir resistance. Due to the distance from the catalytic site and to the lack of reliable structural data, the contribution of C269Y was not investigated in silico. By a combination of sequence analysis, phenotypic susceptibility testing, and molecular modeling, we characterized a double ZIKV NS5 mutant with decreased sofosbuvir susceptibility. These data add important information to the profile of sofosbuvir as a possible lead for anti-ZIKV drug development.     

Agronomic performance of high oleic,low linolenic soybean in Tennessee

Soybean oil hydrogenation alters the linolenic acid molecule to prevent the oil from becoming rancid, however, health reports have indicated trans-fat caused by hydrogenation, is not generally regarded as safe. Typical soybeans contain approximately 80 g kg⁻¹ to 120 g kg⁻¹ linolenic acid and 240 g kg⁻¹ of oleic acid. In an effort to accommodate the need for high-quality oil, the United Soybean Board introduced an industry standard for a high oleic acid greater than 750 g kg⁻¹ and linolenic acid less than 30 g kg⁻¹ oil. By combing mutations in the soybean plant at four loci, FAD2-1A and FAD2-1B, oleate desaturase genes and FAD3A and FAD3C, linoleate desaturase genes, and seed oil will not require hydrogenation to prevent oxidation and produce high-quality oil. In 2017 and 2018, a study comparing four near-isogenic lines across multiple Tennessee locations was performed to identify agronomic traits associated with mutations in FAD3A and FAD3C loci, while holding FAD2-1A and FAD2-1B constant in the mutant (high oleic) state. Soybean lines were assessed for yield and oil quality based on mutations at FAD2-1 and FAD3 loci. Variations of wild-type and mutant genotypes were compared at FAD3A and FAD3C loci. Analysis using a generalized linear mixed model in SAS 9.4, indicated no yield drag or other negative agronomic traits associated with the high oleic and low linolenic acid genotype. All four mutations of fad2-1A, fad2-1B, fad3A, and fad3C were determined as necessary to produce a soybean with the new industry standard (>750 g kg⁻¹ oleic and <30 g kg⁻¹ linolenic acid) in a maturity group-IV-Late cultivar for Tennessee growers.     

关于加快推动广西甘蔗产业绿色发展路径选择的研究

在国际食糖市场严峻的新形势下,笔者认为加快构建广西甘蔗产业绿色发展技术体系,是加快推动甘蔗产业绿色发展,提高广西乃至我国甘蔗产业质量效益竞争力的必由之路,本文提出6点对策措施,即:"必须抓好甘蔗生产保护区的划定与建设"、"必须转变甘蔗生产经营方式"、"必须加大甘蔗优良新品种的推广力度"、"必须加快推广甘蔗生产全程机械化技术"、"必须加大各项轻简高效农业绿色技术推广力度"、"必须进一步创新政策和服务措施"。笔者提出上述措施,以期为加快推进广西甘蔗产业绿色发展提供参考建议。     

Early-warning performance monitoring system (EPMS) using the business information of a project

An early-warning performance monitoring system (EPMS) is proposed to objectively measure and monitor the performance of a project for early detection of inherent poor performance problems. The EPMS is built based on project progress data and consists of a database of business information, an optimized theoretical model used as a performance measurement baseline, and an index for monitoring and forecasting the performance. By monitoring the performance through an application of the EPMS to the Korean construction project, the quarterly variation of index was found to differ by project type. These results could explain the environmental changes in the project execution. Therefore, the EPMS is expected to be an alternative for objective performance monitoring and forecasting while applying the existing methods is difficult because of the limited available data on performance indicators. The development procedures may also be useful to researchers interested in approaches to quantitatively analyze trends in various industries.     

单片机与接口技术项目化教学改革的实践与探索

As a comprehensive electrical and electronic course, Single Chip Microcomputer and Interface Technology is usually com- bined with automation technology, applied electronic technology, communication technology, etc., so that students can master the professional theory and application practice of single chip microcomputer. In the course teaching, teachers mainly focus on the knowledge points of single chip microcomputer system design, application programming, installation and debugging, select suitable interface circuit, application program, and organize and design the integrated circuit system and logic function of single chip micro- computer, so as to help students complete the resource allocation and function realization of different single chip microcomputer project design.     

An improved iterative stochastic multi-objective acceptability analysis method for robust alternative selection in new product development

Alternative selection in new product development (NPD) is a multi-criteria decision-making (MCDM) problem. It usually starts with incomplete, imprecise or even partially missing information. Currently, most existing methods in dealing with this problem cannot work well if required information is incomplete or missing. It is acknowledged that stochastic multi-objective acceptability analysis (SMAA) can be applied to address MCDM problem with incomplete preference information and uncertain criteria measurements. In SMAA, alternatives are evaluated based on SMAA measurements (acceptability index, central weight vector and confidence factor). The discriminability of SMAA for the optimum alternative heavily depends on differences of SMAA measurements among different alternatives. Usually, a large number of alternatives and high level of uncertainty are involved in alternative selection in NPD. In this situation, the differences among SMAA measurements are not obvious, and therefore SMAA cannot deal with such problem very well. To this end, this paper proposes an improved SMAA method called Iterative-SMAA (I-SMAA) for alternative selection in NPD. In the I-SMAA, an iterative multi-step decision-making process is suggested to improve differences of SMAA measurements among different alternatives, and thus assist decision makers (DMs) to positively discern from the most preferred alternative. To enhance the decision-making efficiency, sensitive criteria are acquired in each iteration by ranking sensitivity analysis. DMs are guided to provide partial preference information and give more accurate criteria measurements for sensitive criteria rather than all criteria. Eventually, to verify the proposed method, a numerical example of the existing literature is solved with the method, and the results are compared. And then, a practical example of a preparation equipment for coal samples is further employed to verify the practicability of the proposed I-SMAA.