2种侧围加强内框总成检具结构对比分析

概述了侧围加强内框总成与周边零件的匹配关系,从检具操作的人机工程出发,描述了侧围加强内框总成检具的2种定位方式和结构设计,对比了2种定位方式对于检测结果的影响,总结了其优点和弊端,结果表明侧围加强内框总成检具采用车内方向朝下的定位方式效果更好。     

Spirobifluorene Dimers: Understanding How The Molecular Assemblies Drive The Electronic Properties

Spirobifluorene (SBF) is one of the most important scaffolds used in the design of organic semi-conductors (OSCs) for electronics. In recent years, among all the structures developed for these applications, SBF dimers have been highlighted due to their great potential in thermally activated delayed fluorescence and in phosphorescent organic light-emitting diodes. Attaching two SBF units generate 10 dimers, each possessing its own structural specificity, which in turn drives its electronic properties. These ten SBF dimers are gathered herein. Understanding how the molecular assembly determines the electronic properties has been one of the pillars of organic electronics. This is the goal of this article. As positional isomerism is a key tool to design OSCs, defining the design guidelines for the SBF scaffold appears of interest for the future of this building block. Herein, the importance of the two main parameters involved in the electrochemical and photophysical properties, namely the nature of the phenyl linkages and the steric congestion between the two SBF units is discussed. The combination of these two parameters drives the electronic properties but their respective weight is different as a function of the regioisomer involved or of the property considered (frontier orbitals energy level, absorption, fluorescence, phosphorescence).     

不同细颗粒含量甲烷水合物沉积物三轴剪切试验研究

海域试开采区域含水合物沉积物的粒度分析结果表明水合物沉积物骨架由粗、细颗粒混合构成,通过开展多组低温、高压三轴排水剪切试验研究细颗粒含量和密度对含甲烷水合物沉积物和无水合物沉积物的强度和变形特性的影响。试验结果表明,含水合物沉积物抗剪强度及剪胀性都随细粒含量提高而显著增强。这是由于细颗粒含量增加改变了颗粒间水合物的样貌和分布特征,形成了由水合物包裹着粗颗粒-细颗粒的团簇状集合体。然而,细颗粒含量对无水合物沉积物的强度和变形特性的影响却表现出相反趋势。另外,含水合物沉积物的剪胀关系可以使用修正剑桥模型中的剪胀关系式进行描述。结果表明,剪胀关系的拟合曲线依赖于水合物饱和度的大小。通过对比研究发现,天然水合物和实验室合成水合物试样在较高饱和度时的峰值摩擦角大小及其伴随水合物饱和度的增长趋势存在差异,这种差异主要来源于水合物在沉积物骨架颗粒孔隙中不同的赋存模式及分布特征。     

基于有限元法的石油射孔枪弹间干扰研究

石油射孔弹顺序起爆后,弹间冲击波相互作用是一个高度非线性的力学过程。基于有限元法对这一过程进行显式动力分析,由计算结果得知,高孔密射孔枪弹间干扰产生的主要原因是下位弹在不对称的压力场起爆。设计的不同孔密和不同爆速的导爆索两种情形的爆轰试验结果表明,弹间间距越小(即孔密的增加),弹间干扰越严重;随着导爆索爆速的降低,下位弹射流头部质量集中的"中间"偏转角度增大,上位弹对其干扰越明显。以上结论可用于高孔密射孔枪的优化设计。     

Enhanced electrocatalytic oxygen reduction reaction from organic-inorganic heterostructure

Herein, molybdenum disulfide nanoflakes decorated copper phthalocyanine microrods (CuPc-MoS₂) are synthesized via two step simple hydrothermal method. The as synthesized hybrid along with pure molybdenum disulfide (MoS₂) nanoflower and pure copper phthalocyanine (CuPc) microrods are well characterized by various techniques that confirm phase, morphology, elemental compositions etc. Next, electrocatalytic oxygen reduction reaction towards fuel cell is investigated in alkaline medium and obtained results proclaim that our CuPc-MoS₂ heterostructure outperforms the other two constituent materials. Efficient oxygen reduction is achieved following four electron pathway by CuPc-MoS₂ whereas partial reduction is done through two electron process by CuPc and MoS₂ separately. Long-time durability test reveals almost 97.6% retention after 8000s that eventually dictate us that CuPc-MoS₂ heterostructure can be the efficient cathode electrocatalyst for future generation fuel cell.     

Elastoplastic stress–strain relationship of Si2N2O–Si3N4 ultrafine-grained ceramics based on microhardness test and finite element simulation

A method for obtaining the stress–strain relationship of ceramic materials was proposed on the basis of the relationship between the maximum load and the indentation size obtained by microhardness test. The microhardness testing process of Si₂N₂O–Si₃N₄ ultrafine-grained ceramics was simulated using ABAQUS finite element software. The stress–strain relationship curve of the material was obtained by repeatedly modifying and comparing the experimental and simulation results. The hardness testing principle and elastic–plastic theory were comprehensively applied in this work in accordance with the geometrical characteristics of the Vickers diamond indenter. The theoretical formula for calculating the stress–strain relationship of hard and brittle materials using microhardness experimental data combined with finite element simulation was deduced. The elastic–plastic area division principle for calculating yield stress was proposed. The accuracy of the theoretical formula was verified by comparing the theoretical and simulation results.     

Contributions of oxygen vacancies to the hydrogen evolution catalytic activity of tungsten oxides

The tungsten trioxide attracts less attention due to the low electron transfer kinetics that hinders the interaction of electrons and ions during the hydrogen evolution reaction (HER). But the oxygen vacancy strategy can inspire its electrocatalytic activity for HER because it has a positive effect on improving the charge transfer and compensating for the weak hydrogen adsorption of the tungsten trioxide. By synthesizing a series of substoichiometric tungsten oxides, we reveal the linear relationship between the catalytic activity and the content of oxygen vacancies, which indicates that the oxygen vacancy strategy is an achievable route to enhance the HER for metal oxides.     

Phase-change regulation criterion based on size-dependent lattice distortion rate and born theory for VO2 nanomaterials

Vanadium dioxide (VO₂) is a promising thermally induced phase transition material because of the abrupt changes in electrical and optical properties. However, the high phase transition temperature of VO₂ and its unspecified modulation relationship need to be resolved urgently. Herein, we proposed a simple and precise regulation criterion for VO₂ materials based on size-dependent lattice distortion rate and Born theory. The results indicated that the application of a tensile stress changed the elastic properties of the VO₂, which promoted VO₂ phase transition, and regulated the phase transition temperature. Moreover, the specific modulation relationship between the stress and phase transition temperature of VO₂ was confirmed experimentally. These results show that our criterion provides theoretical guidance to regulate VO₂ thermally induced phase transition materials.     

Lake charr (Salvelinus namaycush) clotting response may act as a plasma biomarker of sea lamprey (Petromyzon marinus) parasitism: Implications for management and wound assessment

Sea lampreys (Petromyzon marinus) have decimated the Great Lakes fisheries over the past century, and their control is central to protecting native fish populations. Wounding data collected from host fish, including classifying wounds as Type A (penetrating the integument) or Type B (superficial), is an integral part of sea lamprey monitoring efforts and helps inform management decisions; however, wound assessment is subjective and error-prone. This study aimed to determine if protein biomarkers of parasitism could be quantified in host fish plasma to serve as a potential objective aide in current wound assessment practices. Male siscowet lake charr (Salvelinus namaycush) were parasitized in a lab setting for four days, after which the sea lamprey was removed, host blood was collected, and the wound Type recorded. A second blood sample was collected from host fish with Type A wounds 7 months later. The plasma proteome was quantified using iTRAQ, and the relative abundances of 169 proteins were compared between parasitized and non-parasitized control fish. Three functional classes of proteins were modified by sea lamprey parasitism: immune response, lipid transport, and blood coagulation. A major finding was evidence of a concerted anticoagulation response in fish with Type A wounds, including changes in protein components and regulators of fibrin clot formation, some of which did not fully recover within 7 months. A modified clotting assay yielded a smaller thrombin-induced fibrin clot from parasitized fish, supporting the proteomic results. Therefore, measuring blood clottability could improve sea lamprey damage estimates by providing a more objective and quantitative index of parasitism than is offered by wounding data alone.     

犹豫模糊环境下准则具有偏好关系的TODIM方法

针对智慧制造评估时专家的决策信息具有犹豫模糊不确定性问题，提出了一种关于准则具有犹豫模糊偏好关系的改进交互式多准则决策（TODIM）方法。首先提出了准则间的犹豫模糊偏好关系概念，并证明了其基本性质。在TODIM方法优势度的计算过程中，将准则权重犹豫模糊偏好关系替代原有的精确值权重，使信息的准确性最大化。将该方法用于智能制造的评估上，实例分析结果表明所提方法是可行和有效的。