Authenticity green coffee bean species and geographical origin using near-infrared spectroscopy combined with chemometrics

To prevent the adulteration of agricultural resources and provide a solution to enhance the green coffee bean supply chain, authentication using the near-infrared spectroscopy (NIRS) technique was investigated. Partial least square with discrimination analysis (PLS-DA) models combined with various preprocessing methods were built from NIR spectra of 153 Vietnamese green coffee samples. The model combined with the standard normal variate and the first order of derivative yielded excellent performance in predicting coffee species with the error cross-validation of 0.0261. PLS-DA model of mean centre and first-order derivative spectra also yielded good performance in verifying geographical indication of green coffee with the error of 0.0656. By contrast, the predicting abilities of post-harvest methods were poor. The overall results showed a high potential of the NIRS in online authentication practices.     

Microstructure–mechanical property relationship in an Al–Mg alloy processed by constrained groove pressing-cross route

The constrained groove pressing-cross route process was implemented on a commercially annealed AA5052 alloy at room temperature, with up to two passes (strain of ～4.64) along the rolling direction and transverse direction. The results showed the formation of an ultrafine-grained structure with an average sub-grain/cell size in the 300–500?nm range. The indentation hardness and tensile strength increased significantly, up to ～75 and 105%, respectively, and became more homogenous with a uniform and isotropic trend, as compared to the annealed alloy. According to the Hall–Petch and Taylor models used, grain refinement and increasing dislocation density were proposed as the main strengthening mechanisms. Fractographic studies revealed a ductile-fracture behaviour, with a dimpled structure proportional to the UFG structure.     

甜菜果胶乳化活性及稳定性

甜菜果胶是一种从甜菜粕中提取的酸性阴离子多糖,主链由鼠李糖和半乳糖醛酸组成,侧链数量丰富,主要由鼠李糖、阿拉伯糖、半乳糖、果糖等一些中性糖组成。其中中性糖末端与蛋白质共价连接,赋予了甜菜果胶良好的乳化性质。本研究主要探究了甜菜果胶的乳化特性并与柑橘果胶进行对比。考察了甜菜粕产地、果胶质量浓度、pH值、温度、贮藏时间等对乳液特性(粒径分布、平均粒径、Zeta-电位和浊度变化)的影响。研究结果表明,产地不同对甜菜果胶结构组成影响较大,以甜菜果胶制备的乳液粒径显著小于柑橘果胶乳液,且乳化活性更高。当甜菜果胶质量浓度为10~25 mg/m L时,乳液在4周的贮存期内保持良好的稳定性,而柑橘果胶乳液粒径显著增加。pH 2~6的范围内,果胶粒径基本保持不变。25~85℃升温过程中,柑橘果胶乳液粒径大幅增加。说明甜菜果胶具有良好的乳化活性和稳定性。本研究为甜菜果胶的实际应用提供了理论指导。     

超高效液相色谱-串联质谱法测定动物源食品中克霉唑的残留量

目的建立QuEChERS提取和净化、超高效液相色谱-串联质谱(ultraperformanceliquid chromatography-tandem mass spectrometry, UPLC-MS/MS)测定猪肉、牛肉、羊肉、鸡肉等畜禽肉和猪肝、猪肾、羊肝、鸡心等畜禽内脏中克霉唑残留的分析方法。方法样品经正己烷饱和的乙腈提取,提取液经乙腈饱和的正己烷液液分配除脂,并经含PSA和C18粉末的净化管进一步净化。采用0.1%甲酸和乙腈作为流动相进行梯度洗脱,多反应监测模式(multiplereactionmonitoring,MRM)测定,同位素内标法定量。结果本方法在7 min内完成分离分析,方法在0.2～20.0μg/L范围内线性关系良好,相关系数r为0.9999。在0.2、2.0和20μg/kg添加水平下的回收率为78.5%～111.9%,相对标准偏差小于11.1%,方法定量限为0.2μg/kg。结论该方法快速、准确、灵敏,适合动物源食品中克霉唑残留量的测定。     

基于傅里叶变换近红外光谱法鉴别五常大米

为保护五常大米的品牌效益,利用傅里叶变换近红外光谱法(Fouriertransformnearinfraredspectroscopy,FTNIS)结合化学计量学分析法对来自五常地区和非五常地区共计191份大米样品进行产地鉴别研究,结果表明:利用因子化法结合FTNIS技术所建立的鉴别分析模型对五常地区大米的鉴别正确率为100%,非五常地域的大米鉴别正确率为97.50%;利用聚类分析模型判别,对五常大米的判别正确率为100%,非五常大米判别正确率为100%。利用偏最小二乘法结合FTNIS建立的定量分析模型对五常大米判别正确率为95.83%,非五常大米判别正确率为95.00%。通过以上研究结果可知FTNIS法对五常大米产地鉴别是可行的。     

International Trade

Values of net oil imports(-)/exports for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, the United Kingdom, Japan, Canada, the United States and Australia. Updated on a monthly basis. Number of imports for Belgium, France, Germany, Greece, Republic of Ireland, Italy, Netherlands, Portugal, Spain, Sweden, the United Kingdom, and Other EU-15 (EU-15), Norway, Poland, Switzerland, Turkey, and Other Europe (OECD Europe), Canada, Chile, Mexico, and the United States (OECD Western Hemisphere), and Australia, Japan, Republic of Korea, New Zealand, (OECD Asia-Pacific), and Total OECED. Current data for Austria, Belgium, Finland, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, the United Kingdom, Other EU-15 (EU-15), Czech Republic, Hungary, Poland, Slovakia, Turkey, and Other Europe (OECD Europe), Canada, Mexico, and the United States (OECD Western Hemisphere), Australia, Japan, Republic of Korea, and New Zealand (OECD Asia-Pacific). Updated on a monthly basis. Current data for principal importers of natural gas and the amount in which they import from United States, Republic of Korea, United Kingdom, France, Japan, Italy, Germany and Spain (Table 19.1). Current data for principal exporters of natural gas and the amount they export to Canada, Trinidad and Tobago, the United States, Netherlands, Norway, Russia, Turkmenistan, Qatar, Algeria, Nigeria, Indonesia, Malaysia and Australia (Table 19.2). Updated on a monthly basis.     

International Trade

Values of net oil imports(-)/exports for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, the United Kingdom, Japan, Canada, the United States and Australia. Updated on a monthly basis. Number of imports for Belgium, France, Germany, Greece, Republic of Ireland, Italy, Netherlands, Portugal, Spain, Sweden, the United Kingdom, and Other EU-15 (EU-15), Norway, Poland, Switzerland, Turkey, and Other Europe (OECD Europe), Canada, Chile, Mexico, and the United States (OECD Western Hemisphere), and Australia, Japan, Republic of Korea, New Zealand, (OECD Asia-Pacific), and Total OECED. Current data for Austria, Belgium, Finland, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, the United Kingdom, Other EU-15 (EU-15), Czech Republic, Hungary, Poland, Slovakia, Turkey, and Other Europe (OECD Europe), Canada, Mexico, and the United States (OECD Western Hemisphere), Australia, Japan, Republic of Korea, and New Zealand (OECD Asia-Pacific). Updated on a monthly basis. Current data for principal importers of natural gas and the amount in which they import from United States, Republic of Korea, United Kingdom, France, Japan, Italy, Germany and Spain (Table 19.1). Current data for principal exporters of natural gas and the amount they export to Canada, Trinidad and Tobago, the United States, Netherlands, Norway, Russia, Turkmenistan, Qatar, Algeria, Nigeria, Indonesia, Malaysia and Australia (Table 19.2). Updated on a monthly basis.     

固体碳直接还原钢铁厂含锌固废的理论与实践

 钢铁厂内的含锌固废数量巨大，同时富含铁、碳等元素，是可循环再利用的二次资源。通过固体碳直接还原ZnO和FeO的热力学分析，发现在非标准状态下，ZnO的还原条件要优于FeO。为此，在实验室条件下设计了含锌固废在不同温度和时间下的还原试验，发现在还原温度为1 423 K、还原时间为15 min以上时，脱锌率可达到90%，而铁的金属化率需要在1 573 K时才能接近90%；在还原温度低于1 423 K时，还原时间对脱锌率的影响较大；在还原温度高于1 473 K时，还原温度对脱锌率影响较小，同时脱锌率可达到95%。这些结果对国内当前处理含锌固废主要工艺(回转窑、转底炉)的操作制度设置具有重要的参考价值，也为如何选择合理的工艺路线，以低投入、低运营成本实现含锌固废的再利用提供了理论依据。     

南水北调中线水源区浮游植物群落结构 及其生物多样性

为探究南水北调中线水源区丹江口水库浮游植物群落结构变化及其生物多样性，于 2014—2015 年对丹江 口水库进行为期 1 年的调查和分析。发现浮游植物共 8 门 76 属 101 种，其中，绿藻门、蓝藻门及硅藻门占总种数 90.10%，绿藻门种类数最多（45 种），其次是蓝藻门（26 种）和硅藻门（20 种）。浮游植物群落结构随季节变化有所 不同：夏秋季节生物量明显高于冬春季节；优势种在冬季以颗粒直链藻、颗粒直链藻极狭变种、铜绿微囊藻和小 环藻为主，春季以球衣藻、薄甲藻属及小环藻为主，夏季以简单颤藻、单胞衣藻原变种和球衣藻为主，秋季以类颤 藻鱼腥藻、简单颤藻、球衣藻和小环藻为主。应用 Shannon-Wiener 多样性指数 H′、Pielou 均匀度指数 J′、Margalef 丰富度指数 Dm评价水质结果表明：丹江口水库夏秋季水体营养化程度更高。典型对应分析表明：水温、透明度、 总氮、总磷等是影响浮游植物群落结构的主要环境因子，夏秋季受温度影响蓝藻、绿藻数量逐渐增多，一定程度 上增加了受水区生态变化风险。本研究可为南水北调中线水源区丹江口水库生态环境变化及生物迁移风险提供 数据支持。     

Improved magnetic and electromagnetic absorption properties of xSrFe12O19/(1−x)NiFe2O4 composites

xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites (0 ≤ x ≤ 1.0) were synthesized by using a conventional solid-state synthetic route. The results show that magnetic hysteresis loops of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are similar to those of individual component ferrites, except for the 0.1SrFe₁₂O₁₉/0.9NiFe₂O₄ and 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄, suggesting that the hard/soft magnetic phases are well exchange-coupled. The saturation magnetization, coercivity, and remanent magnetization of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are increased with increasing content of SrFe₁₂O₁₉, with maximal values of 42.1 Am² kg⁻¹, 78.7 kA m⁻¹, 17.2 Am² kg⁻¹, respectively, as the content x is about 0.5. They are higher than those of the individual components, implying that interface coupling is present in the magnetic composites. The coercivity and remanent magnetization of the composites are increased initially with increasing sintering temperature and then show a downward tendency. For the component SrFe₁₂O₁₉ and NiFe₂O₄, the minimum reflection losses are −12.5 dB and −18.3 dB at match thicknesses of 2.5 mm and 2 mm, respectively. Compared with those of the component SrFe₁₂O₁₉ and NiFe₂O₄, the microwave absorption performances of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are improved remarkably, especially for the samples of x = 0.3 and x = 0.9. The minimum reflection losses values of the 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄ composite are −31.6 dB (12.7 GHz) and −20.2 dB (13 GHz), while those of the 0.9SrFe₁₂O₁₉/0.1NiFe₂O₄ composites are −23.7 dB (16.3 GHz) and −33.5 dB (15.8 GHz), as the matching thicknesses are 2.5 mm and 2 mm, respectively. Therefore, the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites could be used as potential microwave absorption materials.