Topology optimization of flexure hinges with a prescribed compliance matrix based on the adaptive spring model and stress constraint

This paper focuses on the configuration design of flexure hinges with a prescribed compliance matrix and preset rotational center position. A new method for the topology optimization of flexure hinges is proposed based on the adaptive spring model and stress constraint. The hinge optimization model is formulated by maximizing the bending displacement with a spring while optimizing the compliance matrix to a prescribed value. To avoid numerical instability, an artificial spring is used as an auxiliary calculation, and a new strategy is developed for adaptively adjusting the spring stiffness according to the prescribed compliance matrix. The maximum stress of flexure hinge is limited by using a normalized P-norm of the effective von Mises stress, and a position constraint of rotational center is proposed to predetermine the position of the rotational center. In addition, to reduce the error of the stress measurement, a simple but effective filtering method is presented to obtain a complete black-and-white design. Numerical examples are used to verify the proposed method. Topology results show that the obtained flexure hinges have the prescribed compliance matrix and preset rotational center position while also meeting the stress requirements.     

Finite-time adaptive fuzzy control for a class of output constrained nonlinear systems with dead-zone

The article investigates the finite-time adaptive fuzzy control for a class of nonlinear systems with output constraint and input dead-zone. First, by skillfully combining the barrier Lyapunov function, backstepping design method, and finite-time control theory, a novel adaptive state-feedback tracking controller is constructed, and the output constraint of the nonlinear system is not violated. Second, the fuzzy logic system is used to approximate unknown function in the nonlinear system. Third, the finite-time command filter is introduced to avoid the problem of “complexity explosion” caused by repeated differentiations of the virtual control signal in conventional backstepping control schemes. Meanwhile, a new saturation function is added in the compensating signal for filter error to improve control accuracy. Finally, based on Lyapunov stability analysis, all the signals of the closed-loop are proved to be semi-globally uniformly ultimately bounded, and the tracking error converges to a small neighborhood region of the origin in a finite time. A simulation example is presented to demonstrate the effectiveness for the proposed control scheme.     

Machine fault diagnosis with small sample based on variational information constrained generative adversarial network

In actual engineering scenarios, limited fault data leads to insufficient model training and over-fitting, which negatively affects the diagnostic performance of intelligent diagnostic models. To solve the problem, this paper proposes a variational information constrained generative adversarial network (VICGAN) for effective machine fault diagnosis. Firstly, by incorporating the encoder into the discriminator to map the deep features, an improved generative adversarial network with stronger data synthesis capability is established. Secondly, to promote the stable training of the model and guarantee better convergence, a variational information constraint technique is utilized, which constrains the input signals and deep features of the discriminator using the information bottleneck method. In addition, a representation matching module is added to impose restrictions on the generator, avoiding the mode collapse problem and boosting the sample diversity. Two rolling bearing datasets are utilized to verify the effectiveness and stability of the presented network, which demonstrates that the presented network has an admirable ability in processing fault diagnosis with few samples, and performs better than state-of-the-art approaches.     

虚拟手交互中约束类物体操作研究

虚拟手技术是虚拟现实技术中的一种交互方式，是指通过手势识别技术将人的真实手映射到虚拟环境中并与虚拟物体进行交互操作的人机交互方式。主要应用于虚拟训练、虚拟手术和虚拟装配等领域。对虚拟手交互的约束类对象进行了研究，提出了基于运动学的约束类物体操作方法，解决了阀门类有约束物体交互中虚拟手姿态不真实、操作不可控的问题。设计实验验证了基于运动学的方法能以符合实际操作的效果完成虚拟现实系统中的操作任务，可以应用到虚拟训练、虚拟装配等仿真平台。     

Event-triggered distributed receding horizon control for tracking and formation of homogeneous multi-agent systems

This paper proposes an event-triggered distributed receding horizon control (DRHC) approach for the formation and tracking problems of homogeneous multi-agent systems. For each agent, an event-triggering condition, based on assumed predictive information of the neighbours, is derived from stability analysis. Considering the uncertain deviation between the assumed and true predictive information, we design a time-varying compatibility constraint for the individual optimization problem. In the event-triggered DRHC algorithm, each agent solves the optimization problem and communicates with its neighbours only when the event-triggering condition is satisfied, so the communication and computation burden are reduced. Moreover, guarantees for the recursive feasibility and asymptotic stability of the overall system are proved. A simulation example is provided to illustrate effectiveness of the proposed approach.     

Multiphase topology optimization with a single variable using the phase-field design method

In this study, a multimaterial topology optimization method using a single variable is proposed by combining the solid isotropic material with penalization method and the reaction-diffusion equation. Unlike ordinary multimaterial optimization, which requires several variables depending on the number of material types, this method intends to represent various materials as one variable. The proposed method combines two special functions in the sensitivity analysis of the objective function to converge the design variable into prespecified density values defined for each of the multimaterials. The composition constraint based on a normal distribution function is also introduced to estimate the distribution of each target density value in a single variable. It enables density exchange between multiple materials by increasing or decreasing the amount of a specific material. The proposed method is applied to structural and electromagnetic problems to verify its effectiveness, and its usefulness is also confirmed from the viewpoint of cost and computation time.     

基于结构化遮挡编码和极限学习机的局部遮挡人脸识别

提出使用结构化遮挡编码（SOC）结合极限学习机（ELM）的算法来处理人脸识别中的遮挡问题。首先，使用SOC去除图像上的遮挡物，将遮挡物体与人脸分离开；同时，通过局部性约束字典（LCD）来估计遮挡物的位置，建立遮挡字典和人脸字典。然后，将建立好的人脸字典矩阵进行归一化处理，并利用ELM对归一化的数据进行分类识别。最后，在AR人脸库上进行的仿真实验结果表明，所提方法对不同遮挡物和不同区域遮挡的图像具有较好的识别率和鲁棒性。     

防振条约束失效对蒸汽发生器传热管面内流弹失稳的影响研究

根据防振条布置以及面内支承连续失效个数，将防振条面内约束失效分析划分为多种工况，分析了不同工况下面内约束失效对传热管面内模态的影响，采用各位置阻尼在振型函数上进行加权平均的方法计算了各阶模态的阻尼比，进而研究了防振条面内不同约束对传热管面内流弹失稳的影响。分析结果表明，随着面内支承连续失效位置的增多，弯管段面内首阶模态频率不断降低，出现在弯管段的振型越加明显；弯管段面内首阶模态不一定是最大流弹失稳比值出现的模态，最大流弹失稳比值出现模态的振型几乎都出现在弯管段；随着面内支承连续失效位置的增多，面内流弹失稳比值不断增大，当连续3个及以上防振条面内约束失效时，将出现流弹失稳现象。     

基于多线结构光的弱纹理物体形貌测量方法

大多数现有的主流结构光测量装置在被测物体的表面上投射单条激光,通过移动装置实现物体表面的扫描重建。为了实现物体表面的在线快速重建,将多线结构光和双目立体视觉理论相结合,设计了一种新的三维测量方法。提出了一种结合形态滤波和Zhang-Suen细化算法的光条骨架提取方法和基于光条序列关系的光条匹配算法,并通过极线约束实现光条上特征点的精确匹配。通过实验验证了方法的有效性,相对误差在3%以内。     

Optimal robust optimization approximation for chance constrained optimization problem

Chance constraints are useful for modeling solution reliability in optimization under uncertainty. In general, solving chance constrained optimization problems is challenging and the existing methods for solving a chance constrained optimization problem largely rely on solving an approximation problem. Among the various approximation methods, robust optimization can provide safe and tractable analytical approximation. In this paper, we address the question of what is the optimal (least conservative) robust optimization approximation for the chance constrained optimization problems. A novel algorithm is proposed to find the smallest possible uncertainty set size that leads to the optimal robust optimization approximation. The proposed method first identifies the maximum set size that leads to feasible robust optimization problems and then identifies the best set size that leads to the desired probability of constraint satisfaction. Effectiveness of the proposed algorithm is demonstrated through a portfolio optimization problem, a production planning and a process scheduling problem.