就诊等待服务APP适老化设计研究

目的 将数字化服务融入老年患者就诊流程，建立适老化就诊等待服务系统，在APP开发设计研究中实现软件流程优化。方法 依据ERG理论对老年患者在就诊等待过程中的需求点进行分类整理和层次划分。调研目标用户将分析结果融入服务设计理论，为指导软件开发所涉及的医院就诊流程、用户需求痛点，提出系统性的解决策略。基于交互设计原则展开APP界面设计。结论 构建了以老年患者为中心的就诊等待服务系统，帮助提升其等待过程中的自我效能。完善了基于产品使用方式层级的适老化就诊等待服务APP设计策略，为适老化、数字化产品研发提供了新思路;最终产出APP设计实例，提高了老年群体社会参与度，鼓励老年患者自主就诊，帮助其更加轻松地享受信息化时代带来的红利。     

控制爆破法处理卡钻事故

介绍了在包头市某工程实施管道穿越黄河施工中,采用爆破法处理卡钻的经验。针对深水环境条件及钻杆内径小不宜采用集团装药的条件,确定采用"小直径爆破筒,钻杆内部装药"的爆破方案,阐述了爆破设计及施工注意事项。可供类似工程参考。     

Dynamic simulation of hydrogen-based off-grid zero energy buildings with hydrogen storage considering Fanger model thermal comfort

In this study, some locations with different climates, off-grid zero energy buildings with hydrogen energy storage systems are designed, and transient analysis is conducted. These considered buildings supply their electricity consumption without using the electrical grid and PV panels or wind turbines. Also, they supply thermal comfort to occupants by using a vapor compression chiller and humidifier. Domestic hot water of occupants is supplied using solar collectors. For analyzing building's performance and objectives achievement, TRNSYS software is used. Also, for evaluating occupant thermal comfort, the Fanger model is used. The considered building is a one-story building with a 150 m² area. Four occupants are considered. Both of them are seated at rest, and another is seated with light working such as typing. Using the Fanger model equation and MATLAB software, the thermal comfort of occupants is determined. For domestic hot water consumption, verified profiles that vary during 24 h of the day are considered. Achieved results show that for humid and cold cities, PV panels with an area of 73 and 76 m² can be supplied the required electricity of considered building with four occupants and battery state of charge is higher than 50% and 10%, respectively. Moreover, with a suitable air conditioner system, the predicted percentage of dissatisfied (PPD) can be lower than 12% and 8% for humid and cold cities. Therefore, the building can be converted to a zero-energy building using its rooftop area.     

Effects of different metal corrosion inhibitors on hydrogen suppression and film formation with Mg–Zn alloy dust in NaCl solutions

To improve the safety of wet dust removal systems for processing magnesium-based alloys, a new method is proposed for preventing hydrogen generation. In this paper, hydrogen generation by Mg–Zn alloy dust was inhibited with six common metal corrosion inhibitors. The results showed that sodium dodecylbenzene sulfonate was the best hydrogen inhibitor, while CeCl₃ enhanced hydrogen precipitation. The film-forming stability of sodium dodecylbenzene sulfonate was tested with different contents, temperatures, Cl^? concentrations and perturbation rates. The results showed that this inhibitor formed stable protective films on the surfaces of Mg–Zn alloy particles, and adsorption followed the Langmuir adsorption model.     

Status and initial experiments of DRAGON-V facility for lithium-lead blanket technologies of hydrogen fusion reactors

A dual-coolant integrated experimental facility named DRAGON-V has been developed at the Institute of Nuclear Energy Safety Technology, Hefei Institute of Physical Science, Chinese Academy of Sciences, for the key technology research and performance evaluation of candidate liquid lithium-lead (PbLi) blanket of hydrogen fusion reactors. The loop is composed of a material test sub-loop and thermal-hydraulic test sub-loop, the design parameters are PbLi inventory 20 tons, PbLi temperature up to 550 °C, the maximum PbLi flow rate up to 40 kg/s. A novel cold trap system is designed to remove the suspended and crystalized impurities in PbLi fluid with three cooling zones and cross row arrangement of rod bundle filter elements. The paper describes the loop itself and its major components, initial loop testing, flow and measurement diagnostics and current experiments. The obtained test results of the loop and its components have demonstrated that the new facility is fully functioning and ready for experimental studies of material corrosion with/without a magnetic field, magnetohydrodynamic (MHD) effect, purification, heat and mass transfer phenomena in PbLi flows and can also be used in mock-up testing in conditions relevant to fusion applications.     

Combining a new baseboard radiator with a fan coil system for improving heating performance and reduce energy consumption

In the present work, the heating performance of a new system combined with a new modified baseboard radiator and fan coil is investigated. Using longitudinal fins with special geometry and also forced airflow at the end of the system causes that at the lower inlet water temperature compared with the conventional models, higher heat output rate be obtained. The heat output rate of the new modified system is obtained by experimental metrology based on the European Standard No. EN-442. Temperature and velocity distribution in the room space is done by simulation of the modified system in the Flovent software. Computational fluid dynamics (CFD) results are validated against experimental results and there is a good agreement between them. Also, the energy consumption of the system during the winter season is calculated in TRANSYS software. Experimental results show that the heat output rate of a new modified heating system with inlet water temperature in the range of 45–55°C is on average 4.17 times higher compared with the conventional model. CFD simulation also showed that the combined system provides good thermal comfort conditions. Energy consumption of the new system reduced about 13% compared with conventional models.     

电力保护装置自动测试系统设计与研究

电力保护装置在出厂前要进行严格的板卡测试,传统板卡测试系统自动化程度较低,功能不够强大,且开发成本高,通用性不好。针对以上不足,设计了一种基于虚拟仪器的板卡测试系统,该系统主要由测试程序和上位机两部分组成,测试程序主要完成对板卡设备的模块化测试,并给出测试结果;上位机通过以太网与测试板卡通信,借助FTP和telnet技术,完成整个测试程序的发送、执行、测试结果的获取等功能。以电力保护装置内的CPU板卡为研究对象,结果表明,该测试系统可对板卡进行高效率自动测试,测试结果可靠,故障信息可追踪,可有效提高电力保护装置调试的通过率,保证企业产品的可靠性。     

“半翻转”教学模式下评价指标体系研究与实践

研究基于“半翻转”教学模式的线上教学评价指标体系,包括课前活动开展、课中教学活动设计、课后任务以及基于此过程中的评价指标体系设计。最后通过层次分析法设计评价指标权重,设计评价算法得到动态评价结果。该评价指标体系应用在本专业“数据结构与算法”课程中,并得到良好的应用效果。     

铅基卤素钙钛矿阻变式存储器研究进展

随着数字通信在大数据以及物联网等领域的应用,推动了下一代存储设备的发展。阻变式存储器因其功耗低、尺寸可调、操作速度快等优点被认为是最有前景的信息存储器件之一。近年来,兼具成本低、带隙可调、载流子扩散长度长、离子迁移速率快、载流子迁移率高等优点的铅基卤素钙钛矿,在阻变式存储器领域引起了广泛关注。主要对铅基卤素钙钛矿阻变式存储器最新研究进展进行了概述,就铅基卤素钙钛矿阻变式存储器结构、阻变性能、阻变机理等方面进行了综述。最后,对铅基卤素钙钛矿阻变式存储器当前面临的挑战进行了讨论,并对其未来的发展前景进行了展望。     

传统企业数字化转型能力体系构建研究

企业试图完成数字化转型,这是在竞争中谋求发展的必经之路。文章率先进行数字化转型特征、策略的概念分析,而后总结以此为背景的能力模型、企业管理能力与技术能力,最终以某公司案例完成体系构建与应用的阐述。