A numerical study of dynamic behaviors of a unitized regenerative fuel cell during gas purging

The gas purging states affect electricity output and energy storage capacity of unitized regenerative fuel cells. In this study, a model of unitized regenerative fuel cell is established. Cell voltages and operating temperatures influences on the dynamic distribution of thermal fluid during purging process and the discharge of residual liquid water in electrolytic cell mode are investigated. The motivation of the present study is better understanding the gas purging characteristics and its effect on reaction behaviors of unitized regenerative fuel cells. Simulation results reveal a significant influence of purging gas temperature on the water flooding and a great effect of operating voltage on the water diffusion. The operating temperature of electrolytic cell model almost has little effect on purging results at different cell temperature and the same purging gas temperature. When the purging gas temperature is changed, higher temperatures of cell and purging gas facilitate liquid water discharging out from the cell regions. In cell water flooding situation, when having large liquid content, the purging gas has little effects on the water expelling process.     

A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

Negative magnetization and exchange bias effect in Fe-doped CoCr2O4

Polycrystalline ceramics of Co(Cr_1-xFe_x)₂O₄ (0?≤?x?≤?0.12) were experimentally studied based on a series of temperature and time-dependent dc magnetic measurements using different magnetic field histories. Magnetization in field cooling process was continuously decreased for doping content x in the range of 0?≤?x?≤?0.04. Remarkable negative magnetization is observed when x reaches to 0.06 and persists up to x?=?0.1. Two-sublattice model is established and competition of the two magnetic sublattices is responsible for the phenomenon. The magnetic switching effect is realized just by changing the magnitude of the applied magnetic field and double magnetocaloric effects are obtained. These unique features under low magnetic fields show attractive for application in spintronic devices due to that the magnetic state can effectively be tuned through magnetic field or temperature. Besides, the system exhibits both positive and negative exchange bias fields which are considered to be originating from the unidirectional anisotropy of exchange coupling of antiferromagnetic/ferromagnetic phases and spin reorientation of the two sublattices magnetic moments, respectively.     

反应釜夹套多介质智能切换控制系统设计

为了解决反应釜夹套内多种介质切换时易因操作失误引起介质混乱的问题,提出了反应釜夹套多介质智能切换控制方案。在生产过程中进行升/降温操作时,程序通过介质标识位自动识别夹套内的当前介质,并通过压空操作时间标准判断夹套压空终点,可以自动完成介质压空及切换等操作。实际应用表明:该方案提高了夹套介质切换的可靠性。     

The visual impact of augmented reality during an assembly task

Many studies have shown the benefits of augmented reality (AR) to improve manufacturing and control processes in industry. However, the presentation of AR content through optical see-through head-mounted displays may induce unnatural viewing conditions, which consequences on the user’s visual system have not been investigated yet. This study aimed at assessing whether using AR instructions to guide a manual task, i.e., conditions where the user is forced to repeatedly look at and accommodate in different planes to extract information from both real and virtual environments, could potentially impact the visual system of operators. A before/after design study was carried out, asking 26 participants to perform Lego assemblies for 30 min with either paper or AR instructions. The effects of using AR compared to paper instructions were evaluated both on binocular vision, with classical optometric measurements, and on visual fatigue, with the Virtual Reality Symptoms Questionnaire. No clinically significant differences in optometric measurements (far/near visual acuity, stereoacuity, phoria, convergence, fusional amplitude, accommodation amplitude, accommodative convergence) have been found between AR and paper instructions, and only negligible fatigue symptoms have been seen specifically for AR. Results from both objective and subjective measurements suggest that there is no impact of AR on the oculomotor system and that, in this specific case of use, AR can be safely used for production operators.     

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile.     

Distributed adaptive neural networks leader-following formation control for quadrotors with directed switching topologies

The leader-following formation problem is discussed for a team of quadrotors under directed switching topologies. To obtain a more general dynamic model, we describe the quadrotor system in a non-affine pure-feedback form with mismatched unknown nonlinearities. By employing an adaptive neural networks state observer to approximate the unknown nonlinear functions and to reconstruct the immeasurable inner states, we propose a novel distributed output feedback formation control protocol with the backstepping method combining with the dynamic surface control technique. From the Lyapunov stability theorem, all signals in the closed-loop formation system are proven to be cooperatively semiglobally uniformly ultimately bounded for any given bounded initial conditions. Finally, we proved that we verify the performance of the proposed formation control approach by a simulation study.     

Design and control of coaxial switching system for ion cyclotron wave resonance heating system of EAST

Ion cyclotron wave resonance heating system(ICRH) which is one of the most important auxiliary system in EAST provides conditions for heating the plasma. In order to make the whole transmission network of ICRH form the required state, the coaxial switching system was developed, which mainly consists of 11 same coaxial switches. Each coaxial switch has a controller with an RS485 communication interface and is able to switch between two states. All controllers are integrated to an RS485 hub which connects to the computer. A master computer software is developed to control the coaxial switching system so as to achieve the state needs of ICRH. Moreover, several rounds of experiments show that the coaxial switching system operates reliably. The coaxial switching system has already been applied to normal use currently.