Material removal profile prediction and experimental validation for obliquely axial ultrasonic vibration-assisted polishing of K9 optical glass

K9 optical glass is one of the typical components in optical systems. However, because of its poor fracture resistance, it is difficult to polish it with ultra-precision and high-efficiency and without any surface damage simultaneously. The emergence of the obliquely axial ultrasonic vibration-assisted polishing (UVAP) method can solve this problem which encounters in polishing efficiency and shape accuracy. However, due to the unclear material removal profile (MRP) mechanism, obliquely axial UVAP is not widely used in the processing field. This paper introduces the obliquely axial UVAP method in research processes, mainly focusing on the fixed point MRP analysis of the obliquely axial UVAP. Based on Hertz's contact theory, polishing pressure, the length of the semi-long axis (LLA) and the length of the semi-short axis (LSA) of the contact area are calculated under ultrasonic vibration conditions. Meanwhile, the relative linear velocity distribution of the oblique polishing tool in the instantaneous contact area is modeled by mathematical geometry method. A novel model of the MRP distribution for obliquely axial UVAP is proposed following the Preston equation. Subsequently, a series of polishing experiments were carried out to verify this model. The results show that the numerical model has good agreement with the experimental results on MRP, LLA, LSA, material removal depth and material removal rate (MRR). In addition, the material removal capability can be significantly improved by larger ultrasonic amplitude and larger oblique angle. This model not only more clearly elucidates the processing mechanism of obliquely axial UVAP, but also provides theoretical support for the polishing of free-form optical lenses.     

A novel approach for bulk micromachining of 4H-SiC by tool-based electrolytic plasma etching in HF-free aqueous solution

Bulk micromachining of single-crystal SiC has been challenging due to its extreme stability both mechanically and chemically. To address this issue, a novel tool-based electrolytic plasma etching method is proposed, with which micropatterns and micro-holes are fabricated in SiC in a hydrofluoric acid-free aqueous solution with no need for masks. The material removal is the result of the combined effects of electrolytic plasma chemistry and physics. The chemistry refers to the reaction of Si with hydroxyl radical to form various SiO_x and with H to form silanes, and the reactions of C to form volatile carbon oxides or hydrocarbons, all of which are accomplished and enhanced under the electrolytic plasma atmosphere. Besides, the local high temperature of plasma thermally promotes the evaporation or dissolution of SiO₂ in NaOH solution. The tool-based electrolytic plasma etching method provides alternative approaches for the fabrication of SiC-based MEMS and devices.     

煤矿锚杆机除尘马达改进

针对煤矿进口锚杆机除尘马达频繁出现故障的情况,通过排查除尘装置的安装方式和监测马达工作时的压力状态,查找故障原因,并制定解决方案。通过马达外接单向阀,可满足马达进油口最低安全压力限制的要求,解决了马达频繁损坏的问题,保障了设备工作的稳定性,提高了工作效率。     

Statistical optimization of operating parameters of microbial electrolysis cell treating dairy industry wastewater using quadratic model to enhance energy generation

The performance of Microbial electrolysis cell (MEC) is affected by several operating conditions. Therefore, in the present study, an optimization study was done to determine the working efficiency of MEC in terms of COD (chemical oxygen demand) removal, hydrogen and current generation. Optimization was carried out using a quadratic mathematical model of response surface methodology (RSM). Thirteen sets of experimental runs were performed to optimize the applied voltage and hydraulic retention time (HRT) of single chambered batch fed MEC operated with dairy industry wastewater. The operating conditions (i.e) an applied voltage of 0.8 V and HRT of 2 days that showed a maximum COD removal response was chosen for further studies. The MEC operated at optimized condition (HRT- 2 days and applied voltage- 0.8 V) showed a COD removal efficiency of 95 ± 2%, hydrogen generation of 32 ± 5 mL/L/d, Power density of 152 mW/cm² and current generation of 19 mA. The results of the study implied that RSM, with its high degree of accuracy can be a reliable tool for optimizing the process of wastewater treatment. Also, dairy industry wastewater can be considered to be a potential source to generate hydrogen and energy through MEC at short HRT.     

Production of a halotolerant lipase from Halomonas sp. strain C2SS100: Optimization by response-surface methodology and application in detergent formulations

The aim of this work was to optimize the production of a new lipase by a halotolerant bacterial strain Halomonas sp. C2SS100, by means of the response-surface methodology (RSM). The process parameters having the most significant effect on lipase production were identified using the Plackett–Burman screening design-of-experiments. Then, Box–Behnken design was applied to optimize lipase activity and the quadratic regression model of the lipase production was built. Indeed, the lipase yield was increased, and the value obtained experimentally (39 ± 2 U/ml) was very close to the rate predicted by the model (40.3 U/ml). Likewise, optimization of parameters by RSM resulted in 2.78-fold increase in lipase activity. These findings provide the first report on lipase production and optimization by a halotolerant bacterial strain belonging to Halomonas genus. Afterward, the biochemical properties of the produced lipase were studied for apply in oil stains removal. The crude lipase showed a maximum activity at 60°C and at pH ranging from 7 to 10. It displayed an important stability at high temperature, pH, and NaCl. Interestingly, this bacterial lipase exhibited a prominent stability toward some commercial solid and liquid detergents after 30 min of incubation at 50°C. The capability of the crude lipase to eliminate stain was ascertained on polycotton fabric pieces stained with lubricating oil. Whether with the addition of hot water alone or of a commercially available detergent, lipase is able to considerably boost the elimination of oil stains. The actual findings highlight the capacity of Halomonas sp. lipase for energy-efficient biocatalytic application.     

Evaluation of the localized corrosion on Mg electrode surface by electrochemical noise technique

The symmetrical and asymmetrical electrodes made of Mg were studied in 0.1-M NaCl electrolyte adjusted at pH 12. The statistical and wavelet methods were employed for analyzing the electrochemical current noise (ECN) signals. The asymmetric configuration was used for electrochemical detection of filiform corrosion on Mg electrode. The real time scale of the dominant transients of the asymmetric electrodes was detected on the basis of the maximum peak in the SDPS plots. The SDPS values of the real time scale crystals of the ECN signals resulting from asymmetrical electrodes increased with the increase in immersion time due to the onset of filiform corrosion.     

Simultaneous bioelectricity generation and pollutants removal of sediment microbial fuel cell combined with submerged macrophyte

A submerged macrophyte sediment microbial fuel cell (SP-SMFC) was constructed in this study. Ceratophyllum demersum L., Vallisneria natans, Hydrilla verticillate were chosen as the submerged plants to form cer-SMFC, val-SMFC, hyd-SMFC systems. Plant groups showed the advantage of bioelectricity generation and pollutants removal compared with the unplanted system. The cer-SMFC group stood out with the maximum power density as 24.56 mW m^?2 and the average pollutants removal in overlying water (COD: 81.16%, TN: 65.27%, TP: 79.10%) and in sediments (TN: 26.40%, TP: 21.79%). The determination of root exudates and radial oxygen loss (ROL) demonstrated that C. demersum L. was superior to other studied submerged macrophytes. More root exudates may contribute to an increase in available substrates for electrochemically active bacteria and other microorganisms. Higher enzyme activities were obtained in three SP-SMFCs (especially in cer-SMFC). ATPase and APA activities in cer-SMFC group were increased by over 40% compared with the control. The results indicated that the presence of plants enhanced the microorganism activities, thereby improving bioelectricity generation and pollutants removal. This study will facilitate the application of SP-SMFC technology as an alternative for in situ remediation of polluted sediments.     

食用油脂生产过程中邻苯二甲酸酯类的迁移规律及其脱除方法的研究进展

邻苯二甲酸酯(PAEs)是一类类激素污染物,在污染的食用油脂中均有存在。PAEs具有致畸、致突变、致癌以及生殖毒性,对食品安全带来高风险。目前,PAEs已被美国、日本、中国先后列入"优先控制污染物名单",也成为我国食品安全领域重点监控对象。对食用油脂加工过程中PAEs的迁移规律和脱除方法进行了综述及展望,以期为食用油脂生产企业预防塑化剂对产品造成二次污染提供帮助。     

镧(La)改性吸附材料脱除水体磷酸盐研究进展

磷素是水体富营养化的主要限制性因子，合适的除磷方法对控制水体富营养化具有重要意义。吸附法是一种经济、高效、操作简单的除磷方法，但如何选择合适的吸附材料是其应用的关键。La应用于常规吸附材料改性可提高其吸附磷酸盐的性能，同时可提高La利用效率。为进一步促进La改性吸附材料脱除水体磷酸盐的发展，本文归纳了国内外关于La改性吸附材料应用于水体磷酸盐脱除的相关研究，介绍了La改性吸附材料脱除磷酸盐的能力，分析了La改性吸附材料脱除磷酸盐的机理、主要影响因素以及解吸磷酸盐的特性。同时在此基础上提出未来应制备出对实际水体磷酸盐脱除高效和选择性强的La改性吸附材料，深入研究吸附材料制备机理以及脱除磷酸盐机理，探明吸附材料解吸磷酸盐的简单方法，并作出吸附材料解吸循环使用的经济效益评价。     

Synthetic fayalite Fe2SiO4 by kinetically controlled reaction between hematite and silicon carbide

The present work explores the preparation of fayalite α-Fe₂SiO₄, the iron-rich end-member of the olivine solid-solution series, as a tar removal catalyst for biomass gasification. The synthetic procedure was developed starting from the stoichiometric mixture of hematite and micrometer size silicon carbide and employing thermal treatments in controlled atmospheres at 1000-1100°C supported by thermodynamic modeling to assess the required redox conditions. The treatments in dry and humidified inert gas yielded phase mixtures containing metallic Fe as one of the main phases, thus emphasizing a shortage of oxygen supply. XRD and TGA studies of precursor mixtures on heating in dry CO₂ demonstrated a multistep mechanism of the overall reaction including (a) fast reactivity between silicon carbide and hematite at ~920°C with formation of metallic Fe and amorphous silica followed by (b) formation of fayalite involving oxygen supplied in the form of CO₂ and competing with (c) over-oxidation to thermodynamically favorable Fe₃O₄+SiO₂ mixture. Comparative studies of reactivity in powdered and pelletized samples emphasized the importance of the kinetic factor in the formation of Fe₂SiO₄ while preventing further oxidation. The preferential formation of fayalite in the CO₂ atmosphere is shown to be favored by shorter treatments of compacted samples at higher temperatures. The procedure was designed (2-step heating to 1100°C in CO₂ followed by fast cooling) for the preparation of pelletized fayalite α-Fe₂SiO₄ catalyst with only minor traces of surface over-oxidation which can be suppressed by adding 10 vol.% of forming gas to CO₂ flow.