结合句法依存信息的方面级情感分类

引入句法依存信息到原方面术语,提出一种新的方面术语表示方法,利用Glove词向量表示单词以及单词与单词之间的依存关系,构造出包含句法依存信息的依存关系邻接矩阵和依存关系表示矩阵,利用图卷积神经网络和多头注意力机制将句法依存信息融入到方面术语中,使得方面术语表达与上下文结构高度相关。将改进后的方面词术语表示替换到现有模型后,模型泛化能力得到有效提升。对比试验和分析结果表明:该方法具有有效性和泛化性。     

Influence of pressure and dwell time on pressure-assisted sintering of calcium cobaltite

Calcium cobaltite Ca₃Co₄O₉, abbreviated Co349, is a promising thermoelectric material for high-temperature applications in air. Its anisotropic properties can be assigned to polycrystalline parts by texturing. Tape casting and pressure-assisted sintering (PAS) are a possible future way for a cost-effective mass-production of thermoelectric generators. This study examines the influence of pressure and dwell time during PAS at 900°C of tape-cast Co349 on texture and thermoelectric properties. Tape casting aligns lentoid Co349. PAS results in a textured Co349 microstructure with the thermoelectrically favorable ab-direction perpendicular to the pressing direction. By pressure variation during sintering, the microstructure of Co349 can be tailored either toward a maximum figure of merit as required for energy harvesting or toward a maximum power factor as required for energy harvesting. Moderate pressure of 2.5 MPa results in 25% porosity and a textured microstructure with a figure of merit of 0.13 at 700°C, two times higher than the dry-pressed, pressureless-sintered reference. A pressure of 7.5 MPa leads to 94% density and a high power factor of 326 µW/mK² at 800°C, which is 11 times higher than the dry-pressed reference (30 MPa) from the same powder.     

辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响

研究辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响。采用3种不同上辊/下辊转速比(ω/ω0,ω为上辊转速,ω0为下辊转速)1:1、1:1.2及1:1.4进行多次试验。结果显示,在最大辊速差条件下(ω/ω0=1:1.4),7075铝板在轧制方向的屈服强度和极限抗拉强度分别提高41.5%和21.9%。此外,当辊速比ω/ω0为1:1.4时,成品轧制板的平均晶粒尺寸减小36%,横剖面平均硬度增加约9.2%。织构研究结果显示,辊速差越大,成品各向同性及硬度越大。然而,采用不同辊速度的连铸连轧会导致变形板伸长率降低约6%。     

基于测绘地理信息技术的涉地税源风险识别模式应用研究

为解决沧州市涉地税源管理手段单一等问题,文中提出以测绘地理信息技术为支撑,通过对多源数据组织管理,建立风险分析指标,采用多种GIS空间分析方法构建了涉地风险税源识别模式并在沧州进行应用。结果表明:该模式能有效识别多种涉地风险,为涉地税源管理提供了支撑。     

Unconditionally Secure Oblivious Polynomial Evaluation: A Survey and New Results

Oblivious polynomial evaluation (OPE) is a two-party protocol that allows a receiver, R to learn an evaluation f(α), of a sender, S's polynomial f(x), whilst keeping both α and f(x) private. This protocol has attracted a lot of attention recently, as it has wide ranging applications in the field of cryptography. In this article we review some of these applications and, additionally, take an in-depth look at the special case of information theoretic OPE. Specifically, we provide a current and critical review of the existing information theoretic OPE protocols in the literature. We divide these protocols into two distinct cases (three-party and distributed OPE) allowing for the easy distinction and classification of future information theoretic OPE protocols. In addition to this work, we also develop several modifications and extensions to existing schemes, resulting in increased security, flexibility and efficiency. Lastly, we also identify a security flaw in a previously published OPE scheme.     

Investigation of using possibility of grape pomace in wafer sheet for wheat flour substitution

In this study, grape pomace (GP), a by-product consisting of grape skins and seeds rich in dietary fibres and polyphenols, was used in wafer sheets at different concentrations [5.00 (GP5), 10.0 (GP10), and 15.0 g 100 g⁻¹ (GP15)] for the partial replacement of wheat flour (WF) and improve the functionality of wafer sheets. The GP inclusion at concentrations higher than 5.00 g 100 g⁻¹ significantly affected the texture of sheets as well as the flow behaviour of batters, resulting in softer sheets and more viscous batters (P < 0.05). Moisture contents did not significantly change after GP addition (P > 0.05). After the addition of GP, the L* values decreased and the a* values increased, making the wafers darker (P < 0.05). Moreover, under simulated in vitro digestion conditions, the bioaccessibility of total phenolic compounds in saliva, gastric juice, and intestinal juice was significantly higher than control even at the lowest GP concentration (P < 0.05). Regarding sensory properties, only smoothness and crispness were significantly affected by GP addition, and samples were found to be crisper with higher concentrations of GP. In conclusion, it is possible to partially replace the WF in wafers with GP at a concentration of 5.00 g 100 g⁻¹ to develop a product with higher functionality and nutrient content.     

控制爆破法处理卡钻事故

介绍了在包头市某工程实施管道穿越黄河施工中,采用爆破法处理卡钻的经验。针对深水环境条件及钻杆内径小不宜采用集团装药的条件,确定采用"小直径爆破筒,钻杆内部装药"的爆破方案,阐述了爆破设计及施工注意事项。可供类似工程参考。     

Utilising grape juice processing by-products as bulking and colouring agent in white chocolate

In this study, grape pomace (mixture of grape seeds and skins) powder (GPP), obtained from grape processing, was used at different concentrations [10.0 (GPP10), 20.0 (GPP10) and 30.0 (GPP10) g/100 g] in white chocolate formulation for the partial replacement of sucrose. The results indicated that GPP addition at a higher concentration (>10.0 g/100 g) significantly affected the particle size, moisture content, texture and flow behaviour of white chocolate samples (P < 0.05). However, using GPP at a concentration of 10.0 g/100 g had advantages for physicochemical and flow properties. As expected, under simulated in vitro digestion conditions, the bioaccessibility of total phenolic compounds in saliva, gastric juice and intestinal juice for GPP10 samples was significantly higher than the control (P < 0.05). In conclusion, results of the study showed that it was possible to partially replace the sucrose with GPP at a concentration of 10.0 g/100 g in white chocolate formulations.