“数字信号处理”课程的几何视角

“数字信号处理”的经典课程体系以“系统”为中心，以离散时间傅立叶变换、z变换和离散傅立叶变换为分析工具，以滤波器设计为目的，注重定理和公式推导及其性质分析，很难让学生建立一个形象的、完整统一的知识体系框架。本文从几何视角将 “系统”化和“代数”化的经典课程体系重构为面向“信号”的“几何”知识体系，从而提升学生对本质问题的“洞察力”，帮助学生建立系统的知识体系。     

基于VR技术的智能变电站运行仿真培训系统

为了更加真实、直观地呈现智能变电站的运行整体结构,构建基于VR技术的智能变电站运行仿真培训系统。该系统通过5个模块协同完成智能变电站运行仿真培训,结合实际变电站的设备情况,采用二维纹理映射方法完成变电站设备仿真建模;系统利用虚拟现实交互模块呈现培训场景,参与培训人员能够通过人机交互设备,实现场景漫游和相关培训内容操作。测试结果表明:该系统能够较好地模拟出智能变电站的实际运行情况,参与培训的人员可以身临其境地完成整个变电站的巡视,更真实、直观地呈现智能变电站的整体状态。     

Predictive process mapping for laser powder bed fusion: A review of existing analytical solutions

One of the main challenges in the laser powder bed fusion (LPBF) process is making dense and defect-free components. These porosity defects are dependent upon the melt pool geometry and the processing conditions. Power-velocity (PV) processing maps can aid in visualizing the effects of LPBF processing variables and mapping different defect regimes such as lack-of-fusion, under-melting, balling, and keyholing. This work presents an assessment of existing analytical equations and models that provide an estimate of the melt pool geometry as a function of material properties. The melt pool equations are then combined with defect criteria to provide a quick approximation of the PV processing maps for a variety of materials. Finally, the predictions of these processing maps are compared with experimental data from the literature. The predictive processing maps can be computed quickly and can be coupled with dimensionless numbers and high-throughput (HT) experiments for validation. The present work provides a boundary framework for designing the optimal processing parameters for new metals and alloys based on existing analytical solutions.     

Revisit the Pitot static tubes in the standards

A Pitot tube is a popular device used for the measurements of flow fields. To control the accuracy of the Pitot tube coefficient, the international standard organization (ISO), the American Society for Testing and Materials (ASTM), and the Japanese Industrial Standards (JIS) issued guidelines that recommended the shape and working conditions of these devices. However, many Pitot tubes on the market do not follow these guidelines. In the present study, various types of Pitot tubes in the market were tested at the National Metrology Institute of Japan (NMIJ) to determine the effects of the geometry and flow characteristics. The results revealed certain limitations in the existing ISO and JIS standards, specifically with regard to the recommended design parameters of the AMCA Pitot tube, the reference coefficient value for the JIS Pitot tube, and the redefinition and limitation of Reynolds numbers pertaining to Pitot tube working conditions.     

瞬变电磁井间勘探的全空间几何因子

井间是剩余油的主要分布区域,为探测井间剩余油,提高采收率,提出了基于全空间几何因子的瞬变电磁井间勘探方法。在本井使用线圈发射、邻井使用线圈接收,根据瞬变电磁场理论,在阶跃信号的激励下发射线圈在地层中激发出沿圆周方向的闭合瞬变电场,该电场在导电地层中产生与地层电导率呈正比的涡流。由Doll地层环模型可知,地层中的涡流在空间任意点激发得到与地层电导率成正比的二次场响应信号(有用信号),并可表示为空间各点电导率的加权平均值,其权重即为井间瞬变电磁勘探的全空间几何因子;全空间几何因子集中分布在发射线圈和接收线圈附近,其它区域分布较少,在发射线圈和接收线圈两侧呈现不同的极性;对瞬变电磁响应与地层电导率、井间距和源距的变化规律研究可知,瞬变电磁井间勘探有用信号随着地层电导率的增大而增大,随着井间距的增加单调减小,在发射线圈和接收线圈处于同一深度时该响应信号幅度最大。     

正偏心正交车铣精加工切削层几何形状研究

针对未考虑正偏心正交车铣切削层几何形状而导致难以全面反映正交车铣切削层几何形状变化规律的问题，基于正交车铣运动规律，在不考虑动力学影响的情况下，对切削层的形成过程进行了静态分析。建立的正偏心正交车铣切削层几何形状的解析模型涉及铣刀侧刃和底刃的切入/切出角度、切削厚度和切削深度。通过试验验证了该解析模型的正确性，并分析了切削参数对铣刀切削层的影响。研究结果为正偏心正交车铣切削层几何形状的变化提供了定量的分析依据，为切削力和颤振的研究提供了理论指导。     

Study of new flow field geometries to enhance water redistribution and pressure head losses reduction within PEM fuel cell

Efficiency of fuel cell is dependent on reactant distribution, products evacuation, pressure losses and many of these factors is dependent on the design of flow field plate. With an effective design, reactant distribution, pressure drop, and water and heat management can be further improved. In this work, two new designs, as multi-serpentine set-up with additional slots and hybrid geometry, on stainless steel bipolar plates, are presented. Electrical performance, and pressure head losses are analyzed by electrochemical methods such as polarization curve and use of electrochemical noise as a diagnostic tool to further understand the impact of water management on performance. On the one hand, multi-serpentine design shows the best electrical performance with an increase of 0.2 V (66%) at 0.9 A/cm² in comparison of traditional serpentine design. On the other hand, hybrid design reveals the lowest pressure head losses, with a decrease of 2 mbar (about 50%) in comparison of traditional serpentine design, and a higher stability with time that can be useful to downsize compressor and provide lower impact on fuel cell stack durability.     

A combination of near-infrared hyperspectral imaging with two-dimensional correlation analysis for monitoring the content of biogenic amines in mutton

The study investigated the feasibility of using a combination of near-infrared hyperspectral imaging (NIR-HSI) with two-dimensional correlation (2DCOS) analysis for rapid and non-destructive determination of the content of biogenic amines in mutton during refrigerated storage. Total contents of biogenic amines (TBA) were used as the perturbation. By analysing the synchronous and asynchronous two-dimensional correlation spectra, sensitive variables that were closely related to TBA contents were obtained. The results showed that the wavelengths in the spectra range of 1002–1335 nm were the research area for the detection of TBA contents in mutton. The least-squares support vector machines (LSSVM) model based on effective wavelengths selected by competitive adaptive reweighted sampling (CARS) from 2DCOS analysis showed excellent results, with correlation coefficient in prediction (Rp) of 0.91, root mean square error in prediction (RMSEP) of 1.67 mg kg⁻¹ and the ratio of performance deviation (RPD) of 2.76. The research demonstrated that the combination of NIR-HSI and 2DCOS could be used as an effective method for monitoring the content of biogenic amines in mutton.     

全二维气相色谱-飞行时间质谱解析红烧乳鸽的挥发性组分

以癸酸乙酯为内标物,采用全二维气相色谱-飞行时间质谱(GC×GC-TOFMS)对市售红烧乳鸽中的香气成分进行了半定量测定和分析。结果共鉴定出111种化合物,分别为醇类21种、酯类15种、醛类14种、酮类12种、酸类3种、硫类10种、烷烃类8种、烯类8种、吡嗪类8种、呋喃类2种、其它10种。总相对百分含量最大的是硫类物质,其次是醛类和醇类物质。硫类物质中含量比较高的有二烯丙基二硫、烯丙基甲基二硫和1-烯丙基-2-异丙基二硫烷,其含量分别为:20653.10μg/kg、2338.33μg/kg、1006.57μg/kg。醛类里己醛、戊醛和苯甲醛的含量是最高的三种,分别为4836.47μg/kg、469.91μg/kg、442.10μg/kg。醇类化合物中1-辛烯-3-醇、2-乙基-1-己醇、1-戊醇含量较高,分别为1204.27、1134.45、422.35μg/kg。酯类、酮类、吡嗪类等其他物质也构成了红烧乳鸽丰富的肉香味。鉴定出的化合物中含量最高的是二烯丙基二硫,其次是己醛和烯丙基甲基二硫,这三种化合物的OAV值也比较高,对红烧乳鸽的香气贡献比较大,是红烧乳鸽的主要特征香气成分。     

Energy‐efficient design of greenhouse for Canadian Prairies using a heating simulation model

Greenhouses in northern climates require a large amount of supplemental heating for growing crops in winter seasons, so energy‐efficient design of greenhouses based on local climate is important to minimize the heating demand. In this study, greenhouse design parameters including shape, orientation, the angle of the roof, and width of the span have been studied for the conceptual design of conventional greenhouses for Canadian Prairies using a heating simulation model. Five different shapes of greenhouses including even‐span, uneven‐span, modified arch, vinery, and quonset shape have been selected for the study. The simulation results proved that the uneven‐span gable roof shape receives the highest solar radiation, whereas the quonset shape receives the lowest solar radiation. However, the quonset shape greenhouse requires about 7.6% less annual heating as compared to the gable roof greenhouse, but the quonset would not be adopted as multispan greenhouses. Therefore, the gable roof greenhouse is considered as energy efficient for the multispan gutter connected greenhouses whereas quonset shape as a free‐standing single‐span greenhouses. In high northern latitudes, the greenhouse with east‐west orientation is more energy efficient from heating and cooling point of view when the length‐width ratio of the greenhouse is more than 1. The heating energy saving potential of the large span width in single‐span greenhouses is relatively higher as compared to the multispan greenhouses.