LTE室分高倒流小区解决方案的研究

LTE室分高倒流直接影响室内4G用户的感知，同时较大程度拉低LTE网络驻留率指标。由于室内无线环境的封闭性，室分小区之间的覆盖独立性，仅仅通过参数调整的手段达到降低高倒流的效果非常不明显，因此本文针对目前影响室内用户感知的高倒流问题，从高倒流小区的标准出发，对室分高倒流小区的发现手段，产生原因及解决方案进行详尽地阐述，并针对各类型的高倒流情形提出解决方法，最终提供读者发现、分析及解决室分高倒流小区的有效方案，从而作为研究方法提供给LTE室内小区高倒流问题解决的指导意见     

排风扇前盖注射模设计

分析了排风扇前盖塑件的工艺特点,介绍了排风扇前盖注射成型模结构及模具的工作过程。     

基于UG的采煤机防爆盖板三维标注及数控工艺研究

随着三维CAD技术的发展,产品制造信息在三维模型和二维图纸之间的反复传递,严重影响了产品制造信息的正确、快速传递。基于三维产品制造信息技术,以采煤机防爆盖板为例,在UG NX10.0中建立了防爆盖板的三维模型并进行了三维标注,设计了加工工艺路线,规划了数控加工刀具轨迹,进行了加工仿真,验证了数控加工的正确性,在此基础上完成了采煤机防爆盖板的三维工艺式设计。该研究对基于模型定义的数字化设计与制造研究,实现制造业信息化具有重要意义。     

Some physiological characteristics to estimate species potential as a mine reclamation ground cover

In finding what physiological characteristics can be used to predict ground cover success on mine reclamation sites, 14 herb and grass species were tested. Establishment and early growth was tested on three different soils, ie vermiculate and quartz sand mixture, quarry overburden and coal mine overburden in a greenhouse. The results indicate that plant height and cover, transpiration rate and foliar pigments may be used to select plant adaptability to mined soil. White clover (Trifolium repens L.) showed the greatest potential as ground cover for mined soils. Species most widely used in reclamation tended to be perennials of moderate rate.     

A comparative study of 3E (energy,exergy, and economy) analysis of various solar stills

In this paper, an experimental study of the conventional solar still (CSS), the conventional solar still with glass cooling (CSSGC), the conventional solar still with basin heating (CSSBH), and the conventional solar still with glass cooling and basin heating (CSSGCBH) was carried out on the basis of the distilled water production, the energy efficiency (EnE), the exergy efficiency (ExE), and economic analysis. The CSSGC and CSSBH contain Peltier modules for cooling the glass and heating the basin. The evaporative heat transfer coefficient for all the experimental stills was calculated. The values of daily distilled water production from the CSSGCBH, CSSBH, CSSGC, and CSS were 4.56, 3.79, 2.49, and 1.89 kg/m², respectively. The daily distilled yield of the CSSBH and CSSGCBH were increased by 58.55% and 50.13%, respectively, as compared with the CSS. Moreover, the daily EnE and ExE of the CSSGCBH were 27.03% and 3.5%, respectively, whereas the EnE and ExE of the CSS were 10.88% and 1.3%, respectively. Furthermore, the cost of distilled water production was found to be 0.26, 0.35, 0.53, and 0.64 $/day for the CSS, CSSGC, CSSBH, and CSSGCBH, respectively, if the selling price of the distilled water was Rs10.     

基于ISIGHT的安全气囊盖板结构优化设计方法研究

选取某款弱化沟槽呈“H”形的聚碳酸酯/丙烯腈?丁二烯?苯乙烯共聚物(PC/ABS)合金材质安全气囊盖板为研究对象，并构建了其有限元仿真模型，对比有限元力学仿真分析结果与理论计算值验证了该有限元仿真模型的可靠性；通过ISIGHT软件集成Catia和ANSYS，选取安全气囊盖板弱化沟槽的横向长度、深度，纵向长度、深度4个参数作为设计变量，选取弱化沟槽横向最大应力与纵向最大应力作为响应变量，分析了设计变量对响应变量的贡献度分布特征并采用NSGA遗传算法对响应变量多目标优化。结果表明,横向长度、纵向深度对横向最大应力为负贡献度，横向深度、纵向长度为正贡献度；横向深度、纵向长度对纵向最大应力为负贡献度，横向长度、纵向深度为正贡献度；在合理范围内，4个参数值的优化设计，实现了横向最大应力提高和纵向最大应力降低的多目标优化，有效减少了安全气囊盖板爆破时产生的碎屑量，提升了产品的安全性能。     

Multiobjective PSO based adaption of neural network topology for pixel classification in satellite imagery

The proposed work involves the multiobjective PSO based adaption of optimal neural network topology for the classification of multispectral satellite images. It is per pixel supervised classification using spectral bands (original feature space). This paper also presents a thorough experimental analysis to investigate the behavior of neural network classifier for given problem. Based on 1050 number of experiments, we conclude that following two critical issues needs to be addressed: (1) selection of most discriminative spectral bands and (2) determination of optimal number of nodes in hidden layer. We propose new methodology based on multiobjective particle swarm optimization (MOPSO) technique to determine discriminative spectral bands and the number of hidden layer node simultaneously. The accuracy with neural network structure thus obtained is compared with that of traditional classifiers like MLC and Euclidean classifier. The performance of proposed classifier is evaluated quantitatively using Xie-Beni and β indexes. The result shows the superiority of the proposed method to the conventional one.     

Effect of vegetative bed on flow structure through a pool-riffle morphology

Natural habitats are created and developed through pool-riffle sequences in rivers, while vegetation cover could play a critical role in the sediment transfer and its quantity and quality. In this study, the effect of vegetation cover on the flow structure in a pool-riffle sequence is investigated in a laboratory flume under bed formation to compare with non-vegetated cover. In this context, instantaneous point velocities were measured by ADV to determine averaged velocity, shear velocity, root mean square velocity, friction factor, Reynolds shear stress and turbulence intensities. Results showed that the vegetation cover increases the thickness of the wall law. Meanwhile, the length of the flow separation zone in the vegetated bedform is more than in the non-vegetated bedform. Variation in roughness coefficients may cause a new boundary layer in which local flow velocities decrease. In both cases (vegetated and non-vegetated bedforms), the momentum is mostly transferred by ejection and sweep phenomena between flow and bedform.     

水基液体磁性磨具复合分散剂配方实验研究

为提高水性液体磁性磨具的稳定性,制备以六偏磷酸钠与聚丙烯酸(PAA)为表面活性剂、纳米二氧化硅为辅助剂的复合分散剂。通过Minitab软件的DOE实验设计模块,以水基液体磁性磨具的沉淀率和零场黏度为评价指标,采用极端形顶点设计复合分散剂的配方并实验研究复合分散剂各组分对沉淀率和零场黏度的影响。结果表明:六偏磷酸钠与PAA之间存在协同作用,纳米二氧化硅对水基液体磁性磨具的零场黏度起到重要作用,三者能够很好地提高水基液体磁性磨具的稳定性。综合考虑沉降率和零场黏度,确定复合分散剂的最佳配比,并通过实验验证了预测值的准确性。     

Refractive index of soft contact lens materials measured in packaging solution and standard phosphate buffered saline and the effect on back vertex power calculation

PurposeTo measure the refractive index (RI) of commonly available soft contact lens (CL) materials, their packaging solutions and compare to the manufacturers’ nominal RI. The relationship between RI versus water content, and the effect of inaccurate RI when converting lens power measured in solution to in-air back vertex power were examined.MethodsThe RI of 18 single vision soft CL materials were measured using CLR 12–70 digital refractometer. Three lenses of each material were measured, in their packaging solution and then after soaking in standard phosphate buffered saline (PBS). The RIs of packaging solution were also measured. Accuracy requirements for correct wet to dry power conversion based on thick lens formula were projected.ResultsThe standard deviation between three samples was less than 0.005. The measured RI ranged from 1.3744 ± 0.001–1.4265 ± 0.0004 for PBS soaked and from 1.3739 ± 0.0003–1.4264 ± 0.0024 for packaging solution soaked materials. Comparing nominal with mean measured PBS and packaging solution RIs, 5 and 3 lens materials, respectively, fell outside ISO tolerance. The packaging solution RI of DailiesAquaComfortPlus had the largest difference of 0.0040, compared to RI of standard PBS. For converting lens power measured in PBS to in-air power, the difference between measured and nominal RI of 0.0104 would result in wrongly calculated in-air power 0.99 D for a -6.00 D lens.ConclusionThe CLR 12–70 is reliable and accurate refractometer for the measurement of soft CL materials. Accurate RI measurements are of relevance with increased use of wavefront sensors to measure lens power while they are immersed in solution. Even small errors in solution or material RI can lead to significant errors in converted in-air power. To obtain valid in-air lens power results, measurement conditions must match the material and solution RIs used for the conversion.