一种自动布线方法：多级线探索法

本文介绍了一种在微机上实现的印制板自动布线方法──多级线探索法及其编程方法。这种方法是基于完备布线算法的概念，通过分析李氏算法和传统线探索法的不足之处而得到的。虽然它也是一种线探索法，但有较传统线探索法更强的探索能力，不需要结合李氏算法而能单独完成布线任务，是一种较理想的算法，通过实验获得了较为满意的效果。     

平差法预计矿区导线网精度

分析了矿区导线网精度预计经典方法存在的问题 ,推导出严密平差法精度预计的数学模型 ,并编制机算程序。     

An exploration of the problems of using function points mark II

Abstract. This paper examines critically the function point analysis mark II (FPA mark II) method of measuring the functionality of information systems. Although the focus of the paper is on FPA mark II as devised by Symons, both this and the Albrecht method, from which the FPA mark II was developed, are briefly discussed. The published attempts to validate FPA mark II are reviewed and then the problems encountered by the author in applying the approach are described. The final part of the paper is concerned with the fit between SSADM and FPA mark II.     

A scheme to randomly generate surface dust points for the 3D complex variable boundary element method (CVBEM)

A scheme to randomly generate dust points on the surface of a three-dimensional (3D) object is proposed. This scheme will potentially eliminate the bias of a density of points which are approximately equally spaced on the surface, as well as eliminate possible weighting requirements for areas of higher density. This method has the potential to reduce computational effort, as fewer points might be required to define the surface area. The global trial function vector can be assigned to these dust points and then entered into the complex variable boundary element method (CVBEM) commercial code. This scheme can be applied to each piece of a system that is comprised of a connected multiple geometry. A noticeable benefit of this approach is that the same problem can be studied several times, using a new random distribution of surface points each time. The smallest error can then be determined and that run selected. The Mathematica code used to generate the scheme is attached as an appendix.     

Existence, uniqueness and stability of the equilibrium points of a SHARON bioreactor model

This paper addresses the dynamics of a SHARON reactor, a promising technology for ammonium removal from concentrated wastewater streams. The contraction mapping theorem is used to determine which operating conditions of a SHARON reactor with pH-control result in a unique equilibrium state. However, this approach only identifies the case of very large dilution rates, in practice corresponding with complete biomass wash-out, i.e. with complete loss of biological activity. Practical operation of a SHARON reactor aims at reaching ammonium conversion to nitrite. To identify such interesting operating points, the equilibrium points are subsequently calculated directly in terms of input variables for a simplified SHARON reactor model. The stability of the obtained equilibrium points is assessed and the corresponding phase portraits are analyzed. The influence of slightly varying parameter and input values is investigated as well.     

CRITICAL POINTS IN THE SOLIDIFICATION OF A PURE MATERIAL

Patterns in the solidification of a pure material are dealt with in this article. Results, deduced from a simple model based on heat conduction in the two phases and the effect of surface tension on the equilibrium temperature at the moving front, present a guide for experimental work. By introducing far-field conditions imitating what can be achieved in an experiment, we explain how the depths of the phases and the width of the container influence the patterns that can be seen if one advances the control variable to the critical point and then just beyond. Our new result is the existence of a third critical point. It occurs at small wave numbers and it is independent of surface tension. It appears because we take the depths of the phases into account. These depths are input values that offer the possibility of controlling crest-to-trough conduction, stabilizing in the solid, destabilizing in the liquid. The new critical point, and the patterns attending its appearance, can be found in cells of easily attainable widths.     

Finding nondegenerate Hopf bifurcation points for four-dimensional two-parametric systems

We establish a numerically feasible algorithm to find a simplicial approximation A to a certain part of the boundary of the set of stable (or Hurwitz) polynomials of degree 4. Moreover, we have that . Using this, we build an algorithm to find a piecewise-linear approximation to the intersection curve of a given surface contained in ⁴ with . We have also devised an efficient computer program to perform all these operations. The main motivation is to find the curve of nondegenerate bifurcation points in parameter space for a given 2-parametric Hopf bifurcation problem of dimension 4.     

在3．39μm波段甲烷吸收特性的测量与应用研究

报道了甲烷气体在３．３９μｍ波段吸收特性的研究结果，及其在３．３９μｍ波段多波长干涉测量中的应用。通过改变甲烷吸收室的充气参数，使激光器工作在双等光强工作点，并完成了绝对距离的干涉测量。     

瓶组气化站的建筑、结构设计要点

瓶组气化站的建筑，结构设计关系到安全，满足使用要求和投资的大小，本文根据多年的实践和最新的有关设计规范的要求，阐述瓶组气化站建筑，结构设计的要点。     

电力地理信息系统外业数据采集编码方案的探讨

本文介绍了配电电力地理信息系统外业数据采集编码的方法；其中包括线路编码、点编码、线路分界点编码、变电所的编码、开关的编码方法等。