Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

Microwave-Assisted Graphite-Support Synthesis of Imidazolones

5(4H)-Oxazolones react with ammonium acetate under microwave irradiation and using graphite as support in an eco-friendly process. The reaction was carried out under solvent-free conditions and the imidazolones were obtained quantitatively. Moreover the reaction time was reduced too.     

An adaptive tracking problem for a family of retarded time-delay plants

Most of the existing switching control techniques are developed specifically for finite-dimensional linear time-invariant (LTI) systems. In many practical applications, however, it is essential to take time delay into consideration in the modelling as the control system can be highly sensitive to delay. In this paper, a multi-model switching control algorithm is proposed for retarded time-delay systems. It is assumed that the plant is represented by a family of known multi-input multi-output, observable, LTI models with multiple delays in the states, and that corresponding to each model in the known family, there exists a high-performance finite-dimensional LTI controller. In addition, it is supposed that a bound on the magnitude of the external inputs and disturbances is available. It is then shown that the proposed switching controller can stabilize the uncertain system, and that under some mild conditions, output tracking can be achieved in the given problem setting. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

Effects of vesnarinone, a novel orally active inotropic agent with an immunosuppressive action, on experimental cardiac transplantation in rats

BACKGROUND: Vesnarinone (VES) has been used for treatment of patients with congestive heart failure. In addition to inotropic effects, it seems to have immunosuppressive action. We tested the hypothesis that VES suppresses graft rejection, inotropic dysfunction caused by early rejection, and chronic coronary obstruction in a heterotopic rat cardiac transplantation model. METHODS: (1) To study acute rejection, hearts from Lewis-Brown Norway (LBN) rats were transplanted into Lewis rats, which were treated with or without VES (50 or 100 mg/kg/day orally). (2) In a functional study, LBN hearts with or without VES (100 mg/kg/ day) were isolated and perfused on day 3 after transplantation to assess inotropic response to isoproterenol (3 x 10(-8) M). (3) To study chronic rejection, Lewis hearts were transplanted into Fisher 344 rats, which were treated with or without VES (50 mg/kg/day) for 90 days. Coronary obstructive disease was assessed by morphometric analysis. There were five to six animals in each group. RESULTS: (1) VES (100 mg/kg/day) prolonged LBN heart survival (11.7 +/- 0.7 vs. 9.6 +/- 0.7 days in control; P < 0.05). (2) Left ventricular developed pressure was depressed in transplanted hearts regardless of VES treatment (84 +/- 12, 90 +/- 8 vs. 144 +/- 16 mmHg in untransplanted hearts; P < 0.01). The developed pressure after administration of isoproterenol in VES-treated hearts (184 +/- 20 mmHg) was higher than transplanted hearts without VES (118 +/- 16 mmHg; P < 0.05), and similar to untransplanted hearts (203 +/- 27 mmHg; P = NS). (3) Transplanted hearts treated with or without VES showed similar grades of rejection (2.0 +/- 0.3 vs. 2.6 +/- 0.2; P = NS), intimal area (6,996 +/- 3,186 vs. 13,441 +/- 5,165 microns2; NS), and coronary luminal obstruction (45 +/- 16% vs. 67 +/- 14%; NS). CONCLUSIONS: VES produces mild prolongation in survival of rat heart grafts, but has no significant effect on chronic graft atherosclerosis. VES preserves the positive inotropic effects of isoproterenol that are otherwise deteriorated by early acute rejection.     

A model to predict the solubility and permeability of gaseous penetrant in the glassy polymeric membrane at high pressure

In this work, the transport properties of gaseous penetrant through several dense glassy polymeric membranes are studied. The nonequilibrium lattice fluid (NELF) in conjunction with the modified Fick's law and dual mode sorption model was used to simulate the gas transport in glassy polymeric membranes. The approach is based on the sorption, diffusion, in which solubility is calculated based on the NELF model, and diffusion coefficient is obtained from the product thermodynamic coefficient and molecular mobility. The governing equation is solved by the finite element method using COMSOL multi-physics software. The developed model for gas permeability of glassy polymeric membrane can be applied in a wide range of pressure and temperature. The comparison of the calculated permeability and solubility of gasses with the experimental data represented the ability of the developed model. Increasing feed gas temperature increases the gas permeability, while this variation leads to lower gas solubility in the glassy polymeric membranes. The effect of feed temperature and pressure on permeability and solubility is investigated, and the experimental data from literature are described by the developed model. A good prediction of the experimental data can be observed over the considered condition.     

Pervaporative removal of acrylonitrile from aqueous streams through polydimethylsiloxane membrane

This study describes the successful separation of acrylonitrile (ACN) from dilute aqueous streams using pervaporation process. The influences of ACN feed concentration, permeate pressure, operating temperature, feed flow rate and membrane thickness on the membrane separation performance were investigated. The results showed that with an increase in ACN concentration in the feed solution, the permeation flux of ACN increased while the enrichment factor decreased. It was also indicated that increasing the permeate pressure reduced the driving force for mass transfer and consequently the permeation flux dropped while the enrichment factor enhanced. Polydimethylsiloxane membranes used in this study showed very good properties in the separation process, leading to enrichment factors in the range of 70-140. Furthermore, the activation energy for pervaporation of both ACN and water calculated from Arrhenius plot indicated that the permeation of water through the membrane was more temperature dependant than ACN.     

Power-delay-product optimal repeater design for horizontal and vertical multilayer graphene nanoribbon interconnects

Journal of Computational Electronics - Power-delay-product optimal design of repeater size and number design for both horizontal and vertical multilayer graphene nanoribbon (MLGNR) interconnects is...     

Optical and photo catalytic characteristics of Ag<Subscript>2</Subscript>S/TiO<Subscript>2</Subscript> nanocomposite films prepared by electrochemical anodizing and SILAR approach

Ag₂S decorated titanium oxide nanotubes (Ag₂S/NTs) were prepared by electrochemical anodizing and successive ionic layer adsorption and reaction (SILAR) approach. The prepared samples were characterized by X-ray diffraction, field emission scanning electron microscopy coupled with energy dispersive X-ray analysis and diffuse reflectance spectroscopy. SEM results indicate titanium oxide nanotubes (NTs) with 90–220 nm in diameter and 15–30 nm in wall thickness were prepared by one-step anodizing method on the surface of titanium foils. Characterization of the Ag₂S/NTs samples indicated that the number of SILAR cycles influenced the morphology of fabricated films. The degradation of rhodamine B was used as a model reaction to evaluate the photo catalytic activity of the obtained samples. Results showed that the photo catalytic activity of Ag₂S/NTs nanocomposite samples is higher than that with bare NTs sample. The incorporation of Ag₂S on NTs improves the photo catalytic activity due to the synergetic effect. Ag₂S/NTs nanocomposite sample prepared by SILAR deposition with 2 cycles gives the highest degrading rate, which can be attributed to appropriate Ag₂S content and high surface area of this sample. Ag₂S/NTs nanocomposites are easy to be recycled and have good stability for repeated use. With the improved visible light degradation performance, Ag₂S/NTs samples would be expected to be used in water purification. Since these prepared electrodes can be easily removed and replaced after the photo catalytic reaction, avoiding the filtration step after photoreaction or the immobilizing process required for photo catalyst particles, the operation in the photo-reactor becomes much easier from an engineering point of view.     

Adaptive sliding mode control of chaotic dynamical systems with application to synchronization

We address the problem of control and synchronization of a class of uncertain chaotic systems. Our approach follows techniques of sliding mode control and adaptive estimation law. The adaptive algorithm is constructed based on the sliding mode control to ensure perfect tracking and synchronization in presence of system uncertainty and external disturbance. Stability of the closed-loop system is proved using Lyapunov stability theory. Our theoretical findings are supported by simulation results.