Long-term sensor measurements of lung deposited surface area of particulate matter emitted from local vehicular and residential wood combustion sources

Abstract

Lung deposited surface area (LDSA) is a relatively new metric that has been argued to be more accurate at predicting health effects from aerosol exposure. For typical atmospheric aerosol, the LDSA concentration depends mainly on the concentration of ultrafine particles (e.g. vehicular exhaust emissions and residential wood combustion) and therefore optical methods cannot be used to measure and quantify it. The objective of this study was to investigate and describe typical characteristics of LDSA under different urban environments and evaluate how a diffusion charging-based Pegasor AQ Urban sensor (Pegasor Ltd., Finland) can be used as an alternative to optical sensors when assessing local combustion emissions and respective LDSA concentrations. Long-term (12?months) sensor measurements of LDSA were carried out at three distinctly different measurement sites (four sensor nodes) in the Helsinki metropolitan area, Finland. The sites were affected mainly by vehicular exhaust emission (street canyon and urban background stations) and by residential wood combustion (two detached housing area stations). The results showed that the accuracy of the AQ Urban was good (R² = 0.90) for the measurement of LDSA when compared to differential mobility particle sizer. The mean concentrations of LDSA were more than twice as high at the street canyon (mean 22 µm² cm^?3) site when compared to the urban background site (mean 9.4 µm² cm^?3). In the detached housing area, the mean concentrations were 12 µm² cm^?3, and wood combustion typically caused high LDSA peaks in the evenings. High correlations and similar diurnal cycles were observed for the LDSA and black carbon at street canyon and urban background stations. The utilization of a small-scale sensor network (four nodes) showed that the cross-station variability in hourly LDSA concentrations was significant in every site, even within the same detached housing area (distance between the two sites ～670?m).     

Managing Impressions Online: Self-Presentation Processes in the Online Dating Environment

This study investigates self-presentation strategies among online dating participants, exploring how participants manage their online presentation of self in order to accomplish the goal of finding a romantic partner. Thirty-four individuals active on a large online dating site participated in telephone interviews about their online dating experiences and perceptions. Qualitative data analysis suggests that participants attended to small cues online, mediated the tension between impression management pressures and the desire to present an authentic sense of self through tactics such as creating a profile that reflected their "ideal self," and attempted to establish the veracity of their identity claims. This study provides empirical support for Social Information Processing theory in a naturalistic context while offering insight into the complicated way in which "honesty" is enacted online.     

Triboelectric charging of fungal spores during resuspension and rebound

The triboelectric charging of fungal spores was experimentally characterized during rebound and resuspension. A fungal spore source strength tester (FSSST) was used as a primary aerosol generator for spores of three fungal species and two powders (silicon carbide and silver). The critical velocity of rebound was determined using a variable nozzle area impactor (VNAI), and the charging state of particles after resuspension and rebound was measured using the FSSST, different impactor setups, electrometers, and optical particle counters. In the impactor setups and the FSSST, five different surface materials relevant for indoor environments were used (steel, glass, polystyrene, paper, and polytetrafluoroethylene). The critical velocity of rebound was determined to be 0.57 m/s for fungal spores, which is relatively low compared to silicon carbide and previous results for micron-sized aerosol particles. Based on the rebound impactor measurements, we were able to define the crucial parameters of charge transfer for different particle–surface material pairs. A contact charge parameter, which describes the triboelectric charging during rebound, was found to have a negative correlation with the charging state of the particles after the resuspension from an impactor. This connects the triboelectric charging during rebound and resuspension to each other. Based on the contact charge parameter values, quantified triboelectric series could be formed. The results of this work show that fungal spores can be charged both positively and negatively during rebound and resuspension depending on the fungal species and surface material.

Copyright © 2016 American Association for Aerosol Research     

Fast liquid-crystal elastomer swims into the dark

Liquid-crystal elastomers (LCEs) are rubbers whose constituent molecules are orientationally ordered. Their salient feature is strong coupling between the orientational order and mechanical strain. For example, changing the orientational order gives rise to internal stresses, which lead to strains and change the shape of a sample. Orientational order can be affected by changes in externally applied stimuli such as light. We demonstrate here that by dissolving-rather than covalently bonding-azo dyes into an LCE sample, its mechanical deformation in response to non-uniform illumination by visible light becomes very large (more than 60 degrees bending) and is more than two orders of magnitude faster than previously reported. Rapid light-induced deformations allow LCEs to interact with their environment in new and unexpected ways. When light from above is shone on a dye-doped LCE sample floating on water, the LCE 'swims' away from the light, with an action resembling that of flatfish such as skates or rays. We analyse the propulsion mechanism in terms of momentum transfer.     

Endothelial cell-matrix interactions

Dynamic interactions between endothelial cells and components of their surrounding extracellular matrix are necessary for the invasion, migration, and survival of endothelial cells during angiogenesis. These interactions are mediated by matrix receptors that initiate intracellular signaling cascades in response to binding to specific extracellular matrix molecules. The interactions between endothelial cells and their environment are also modulated by enzymes that degrade different matrix components and thus enable endothelial invasion. Recent reports on gene targeting in mice have confirmed the role of two classes of matrix receptors, integrins and cell surface heparan sulfate proteoglycans, and a group of matrix degrading proteolytic enzymes, matrix metalloproteinases, in angiogenesis. The significance of endothelial cell-matrix interactions is further supported by several ongoing clinical trials that analyze the effects of drugs blocking this interaction on angiogenesis-dependent growth of human tumors.     

Comparative analysis of available life cycle inventories of cement in the EU

Life cycle inventories (LCIs) are a prerequisite of life-cycle assessments (LCA). This paper conducts a comparative analysis of inventories of several different types of cement produced in Europe. It considers the production of 1 kg of cement from cradle to gate, and all results are based on this mass unit. The reliability of cement inventories is affected by inaccurate or nonrepresentative data, and comparative analysis is difficult due to varying system boundary definitions. Only the four main emissions (CO₂, NOx, SO₂ and dust) are considered. The theoretical model used gives reasonable estimates of emission levels and, thus, can serve as a reference to measured values. In the case of CO₂, this is definitely a feasible alternative to in situ measurements. The emissions derive primarily from the production of clinker, both from the chemical reactions occurring in the kiln and by its fossil fuel consumption.     

Studies on compatibilization of blends of polypropylene and a thermotropic liquid crystalline polymer

Thermotropic liquid crystalline polymers, LCPs, are frequently blended with thermoplastics to achieve an in situ composite structure. Significant mechanical reinforcement is obtained for the matrix polymer in the direction of the LCP fibers, but the transversal properties are often inferior because of the incompatibility of the components. Blends of LCP with polypropylene, and with three related matrix polymers, and PP/LCP blends with added potential compatibilizers were prepared and studied for their mechanical properties and morphology. A notable improvement in impact strength was achieved when a small amount of ethylene-based terpolymer was added as compatibilizer. © 1993 John Wiley & Sons, Inc.     

Effect of viscosity ratio and processing conditions on the morphology of blends of liquid crystalline polymer and polypropylene

The effect of viscosity ratio and processing conditions on LCP/PP blend morphology was studied. The viscosity ratio (η_LCP/η_PP) was varied from 0.1 to 3.6 by using five different polypropylene grades as the matrix and two LCPs as the dispersed phase (20 wt %). The most spontaneous fiber formation was achieved when the viscosity ratio was between 0.5 and 1. In addition to shear forces, elongational forces are important in achieving a highly fibrillar structure and significant mechanical reinforcement. The lubricating effect induced by the low viscosity of LCP was most pronounced for the blends exhibiting a fibrillar morphology. The morphologies of blends produced by different mixing equipment differed only slightly. The greatest variation in the mixing efficiency was found for blends whose components had totally dissimilar melt viscosities. The slight differences in morphology due to melt blending in dissimilar equipment were decreased after injection molding, whereas the differences in morphology due to dissimilar viscosity ratios were still evident in the injection molded blends. Thus, the viscosity ratio at processing in the actual processing conditions is of great importance. © 1994 John Wiley & Sons, Inc.