A highly transparent and thermally stable copolymer of 1‐adamantyl methacrylate and styrene

Thermal and optical properties of copolymers of 1‐adamantyl methacrylate (AdMA) and styrene (St) prepared by free radical polymerization in the bulk are investigated. The copolymer forms an azeotrope when the composition is AdMA/St = 55/45 mol%. The glass transition temperature and decomposition temperature of the azeotropic copolymer are 170 and ca 340 °C, respectively. The refractive index increases nonlinearly with St content from 1.522 to 1.591. The light scattering loss at 633 nm is 28.1 dB km^?1, which is less than half of that of polystyrene. The total optical loss including molecular vibrational absorption, which is evaluated using a copolymer‐based optical fiber, is 292–645 dB km^?1 at 500–700 nm. These values correspond to transmittances of 86–93% for a 1 m optical path length. © 2014 Society of Chemical Industry     

Mechanisms of orientational and photoelastic birefringence generation of methacrylates for the design of zero–zero‐birefringence polymers

The intrinsic birefringence Δn⁰ and photoelastic coefficient C of poly(methyl methacrylate), poly(2,2,2‐trifluroethyl methacrylate), poly(phenyl methacrylate), and poly(2,2,3,3,3‐pentafluorophenyl methacrylate) were determined. We categorized these methacrylate polymers into four birefringence‐types, even though their molecular structures differed only by the substituents on the side chains. Based on the results of Δn⁰ and C, novel polymers that exhibit neither orientational nor photoelastic birefringence, i.e., zero–zero‐birefringence polymers, were designed and synthesized by quaternary copolymerization system. Furthermore, we confirmed that the mechanisms of orientational birefringence and photoelastic birefringence generation were different in these methacrylate polymers. The conformation of the repeat unit of the polymers was nearly constant during the generation of orientational birefringence. In contrast, the conformation of the repeat unit of the polymers changed during the generation of photoelastic birefringence in the glassy state. These findings demonstrated the reasonability of evaluating orientational and photoelastic birefringence separately, as well as the adequacy of the classification of polymers into four birefringence‐types. Given these results and the fact that zero–zero‐birefringence polymers could be prepared successfully by four‐birefringence type monomers, we demonstrated the reasonability of the method for designing the zero–zero‐birefringence polymers. POLYM. ENG. SCI., 55:1330–1338, 2015. © 2015 Society of Plastics Engineers     

High-bandwidth graded-index polymer optical fiber with high-temperature stability

A newly developed graded-index polymer optical fiber (GI-POF) with high-temperature and high-humidity stability was proposed. As it was found that the high numerical aperture and high glass transition temperature (T/sub g/) at the core center of the GI-POF were key issues to achieve both high-temperature and humidity stability, a partially fluorinated polymer material was adopted to obtain both characteristics in the GI-POF. The newly developed GI-POF had low-loss (140 dB/km at 650-nm wavelength), high-bandwidth (higher than 1 GHz for 100 m transmission), high-temperature and humidity stability at 70/spl deg/C, 80% relative humidity (R.H.) and low bending loss.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO_4+δ , in which the phase separation observed in La₂CuO_4+δ is suppressed. A phase diagram in theT?δ plane is given for La_1.9Bi_0.1CuO_4+δ with excess oxygen. For very smallδ values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly atδ ～ 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<δ<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Diagnosis of childhood BK virus cystitis by electron microscopy and PCR

A case of BK virus cystitis in a 5 year old boy is reported. This patient, who was not immunocompromised, had had acute cystitis for two weeks. Many intracytoplasmic inclusions were observed in urinary sediment smears stained by the Papanicolaou method. Electron microscopic examination showed virus particles, presumed to be human polyomavirus, in the nuclei of the degenerated urothelial cells. A DNA sequence of the BK virus was detected in 200-300 urothelial cells in Papanicolaou stained smears by the polymerase chain reaction. BK virus is an unusual cause of symptomatic cystitis in a healthy child.     

The effects of R-75,317 on antiglomerular basement membrane glomerulonephritis in rats

Platelet-activating factor (PAF) is a potent inflammatory mediator which is released by various inflammatory cells and produced by certain tissues, including the kidney. PAF has been shown to increase glomerular permeability to protein and to decrease glomerular filtration rate (GFR) by contracting mesangium. On the basis of these observations, it has been suspected that PAF may play a role as mediator of glomerular damage in glomerular nephritis. To examine this possibility, we studied the effects of a specific PAF antagonist, R-75,317, on the development of an experimental model of anti-glomerular basement membrane (anti-GBM) glomerulonephritis. Glomerulonephritis was initiated by injecting rabbit anti-rat GBM serum into rats. Proteinuria gradually developed after serum injection, plateaued at week 2, and remained at the high level of week 2 throughout the experimental period (6 wk). Chronic treatment with R-75,317 (10 mg/kg/day i.p.) tended to delay the onset of proteinuria and significantly accelerated the recovery phase. Creatinine clearance (Ccr) fell to 40% at week 3. R-75,317 treatment completely prevented this decline of Ccr. Histological changes in this model (glomerular hypertrophy, proliferation of mesangial matrix and interstitial fibrosis) were also ameliorated by the R-75,317 treatment. The results suggest that PAF may play a role in the development of glomerulonephritis and that PAF antagonists could be used in the treatment of human renal disease. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, May 1989.     

Dielectric properties above the glass transition for a series of epoxide prepolymers

Dielectric properties above the glass transition have been investigated for a series of bisphenol-A type epoxide prepolymers (388 ≤ M?_w ≤ 2640). Dielectric measurements were performed over a frequency range of 50 Hz–1 MHz using a vertical parallel plate cell which was constructed in the laboratory. The dielectric α-relaxation for each prepolymer fits the empirical model of the Havriliak–Negami equation. The temperature dependence of the dielectric relaxation time τ is described by the Williams–Landel–Ferry (WLF) equation as well as that of the direct current conductivity σ, which can be measured using the same cell. The relationship between τ and σ, σ^· τ^m = const, is derived from experimental results. The exponent m, which depends on the molecular weight of the prepolymer, is considered to correspond to the ratio of the segmental mobility to ionic mobility. The dielectric loss ε″ can be used as an indicator of the direct current conduction in the temperatures where the ionic component in ε″ becomes much larger than the dipole one.     

Decreased membrane fluidity and unsaturated fatty acids in Niemann-Pick disease type C fibroblasts

We have investigated transformation with heterologous DNA as a method for insertional mutagenesis of Aspergillus fumigatus. Two methods, polyethylene glycol-mediated transformation of protoplasts and electroporation of germinating spores, were used to establish conditions leading to single-copy integration of transforming DNA at different genomic sites. We have assessed the effect of restriction enzyme-mediated integration (REMI) for both methods. Non-REMI protoplast transformation led to integration of multiple copies of transforming DNA in the majority of transformants. Results of REMI with protoplast transformation varied depending on the enzyme used. Low concentrations of several restriction enzymes stimulated transformation, but of ten enzymes investigated only REMI with XhoI and KpnI resulted in single-copy integration of transforming DNA for the majority of transformants. For protoplast transformation with XhoI- or KpnI-based REMI, 50% and 76% of insertions, respectively, were due to integrations at a genomic enzyme site corresponding to the enzyme used for REMI. Electroporation of spores without addition of restriction enzyme resulted in a high transformation efficiency, with up to 67% of transformants containing a single copy of transforming DNA. In contrast to protoplast transformation, electroporation of spores in the presence of a restriction enzyme did not improve transformation efficiency or lead to insertion at genomic restriction sites. Southern analysis indicated that for both protoplast transformation with REMI using KpnI or XhoI and for electroporation of spores without addition of restriction enzymes, transforming DNA inserted at different genomic sites in a high proportion of transformants.     

Determination of glass transition temperature from dielectric analysis for a series of epoxide oligomers

Dielectric properties have been investigated for a bisphenol-A type epoxide oligomer, whose weight average molecular weight (M?_w) was 9454. The dielectric α-relaxation of the oligomer was found to be governed by the Havriliak–Negami equation as well as the same series of oligomers with smaller M?_ws (388≦M?_w ≦ 3903). The dielectric relaxation times (τ)s for the oligomers with different M?_ws (1396 ≦ M?_w ≦ 9454) can be expressed by the Williams–Landel–Ferry (WLF) equation as a function of the glass transition temperature (T_g) at fixed temperatures from 70 to 100°C. The finding indicates that the T_g of the epoxide oligomer is calculated from the τ through the WLF equation, providing the relation between T_g and τ. The same type of WLF equation was also successfully applied to describe the T_g, dependence of the practical dielectric relaxation time (τ_p), which was obtained from the peak of the dielectric loss vs. frequency curve. The τ_p can be calculated more easily than the τ, based on the Havriliak–Negami equation, not only in the measurement of epoxide oligomer, but also in that of the reactive epoxy resin systems during curing. The T_g of an epoxy–aromatic amine system, which was determined from the τ_p nondestructively detected in the dielectric cure monitoring, was consistent with the T_g experimentally measured by differential scanning calorimetry (DSC).     

Development of a coupled land-atmosphere satellite data assimilation system for improved local atmospheric simulations

This study developed a coupled land-atmosphere satellite data assimilation system as a new physical downscaling approach, by coupling a mesoscale atmospheric model with a land data assimilation system (LDAS). The LDAS consists of a land surface scheme as the model operator, a radiative transfer model as the observation operator, and the simulated annealing method for minimizing the difference between the observed and simulated microwave brightness temperature. The atmospheric model produces forcing data for the LDAS, and the LDAS produces better initial surface conditions for the modelling system. This coupled system can take into account land surface heterogeneities through assimilating satellite data for a better precipitation prediction. To assess the effectiveness of the new system, 3-dimensional numerical experiments were carried out in a mesoscale area of the Tibetan Plateau during the wet monsoon season. The results show significant improvement compared with a no assimilation regional atmospheric model simply nested from the global model. The surface soil moisture content and its distribution from the assimilation system were more consistent to in situ observations. These better surface conditions affect the land-atmosphere interactions through convection systems and lead to better atmospheric predictability as confirmed by satellite-based cloud observations and in situ sounding observations. Through the use of satellite brightness temperature, the developed coupled land-atmosphere assimilation system has shown potential ability to provide better initial surface conditions and its inputs to the atmosphere and to improve physical downscaling through regional models.