Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

Functional activation of cerebral blood flow abolished by scopolamine is reversed by cognitive enhancers associated with cholinesterase inhibition: a positron emission tomography study in unanesthetized monkeys

The effects of somatosensory stimulation on the regional cerebral blood flow (rCBF) response were studied in unanesthetized monkeys before and after treatment with scopolamine and three cognitive enhancers (physostigmine, E2020 and tacrine) that inhibit cholinesterase, using 15O-labeled water and high-resolution positron emission tomography. Under control conditions, somatosensory stimulation induced a significant increase in the rCBF response in the contralateral somatosensory cortex of monkey brain. Intravenous administration of scopolamine (50 microg/kg) resulted in abolishment of the rCBF response to stimulation. The rCBF response abolished by pretreatment with scopolamine was recovered by administration of physostigmine (1 or 10 microg/kg), E2020 (10 or 100 microg/kg) or tacrine (100 or 1000 microg/kg), in a dose-dependent manner. The effect of E2020 (100 microg/kg) on the rCBF response lasted for >4 hr, whereas the effects of physostigmine and tacrine were of shorter duration. These findings suggest that these compounds reversed the scopolamine-abolished rCBF response to somatosensory stimulation via enhancement of cholinergic neurotransmission, which was mainly induced by cholinesterase inhibition.     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

An important factor affecting synergism on coprocessing of Taiheiyo coal with Athabasca oil sand bitumen

A series of mixtures of Japanese subbituminous Taiheiyo coal and Athabasca oil sand bitumen (AOB) with various coal concentrations (0–100 wt%) was coprocessed in a 70 ml autoclave at 420°C for 1 h in the presence of H₂ (50 kg/cm² at room temperature) and sulfided Ni---Mo/Al₂O₂ catalyst. The mixture containing 2 wt% coal produced the largest amount of hexane soluble fraction (HS) and the smallest amount of benzene insoluble fraction (BI). Thus, a synergistic liquid production occurred for this mixture with 2 wt% coal by suppressing the retrogressive reactions which proceeded for pure AOB. The HS obtained from mixtures with 2–30 wt% showed higher H/C ratios and lower heteroatom contents than those obtained from pure AOB and the mixtures with more than 30 wt% coal. The amounts of transferable hydrogen contained in the mixtures were estimated using anthracene as a hydrogen acceptor. The mixtures with 2–10 wt% coal contained higher amounts of donor hydrogen than pure AOB. The HS yield from the various mixtures was correlated with the amount of donor hydrogens contained in the mixtures, except for the mixture with 10 wt% coal. Thus, the important factor which results in synergism is suggested to be the amount of donor hydrogens contained in the feed mixtures.     

Sinterability and properties of Ti(N1−x,O x ) y -(V,Ta)C-Ni sintered alloys having a golden colour

The effect of oxygen and carbide addition on the sinterability of TiN _y (0.42<y<1)-Ni alloys, in which part of the nitrogen is replaced by oxygen was investigated. It was found that sinterability increased as the oxygen and carbide content increased, but the strength of the resultant sintered alloys was significantly reduced due to the presence of Ni₃Ti and Ti₂O₃ phases when the oxygen content exceeded 50 mol %. The sintered alloy with the highest hardness was found whenx=0.7,y=0.78 and the (V,Ta)C content was 18% by weight and this alloy was characterized by having a low density, good corrosion resistance and the colour of gold.     

Direct Spectroscopic Determination of Europium(Ⅱ) Concentration During Europium(Ⅲ) Electro-Reduction in Hydrochloric Acid Medium

UV-Vis spectroscopy was used to directly determine the concentration of Eu(Ⅱ) during electroreduction of Eu(Ⅲ) in hydrochloric acid medium. Electroreduction was carried out in a flow type electrolyzer with glassy carbon cathode at the constant potential of -800 mV vs. Ag/AgCl. The effects of oxygen and concentration of hydrochloric acid on the system were investigated. For 0.01 mol·L-1 hydrochloric acid, calibration curves for Eu(Ⅱ) absorption bands at 248 and 320 nm were constructed. Molar absorption coefficients were estimated to be 2016 and 648 L·mol-1·cm-1, respectively. The absorbance strongly decreased with decrease in pH of the solution, whereas concentration of chloride had only a negligible effect.     

A new partitioning process for high-level liquid waste by extraction chromatography using silica-substrate chelating agent impregnated adsorbents

To separate the long-lived minor actinides (MA(III) = Am(III), Cm(III)) and some specific fission products (FP) such as Pd(II), Mo(VI), Cs(I) and Sr(II) from high-level liquid waste (HLLW), we have been studying a new partitioning process by extraction chromatography using several novel silica-based extraction resins. In this work, we examined the separation behavior of the elements contained in a simulated MA-effluent by the CMPO/SiO₂P packed column. In addition, as an attempt to further isolate Am(III) and Cm(III) from the heavy RE(III) such as Eu(III), Gd(III) and Dy(III) contained in the MA-effluent, we investigated the possibility of separation by using a silica-based cationic exchange resin. Furthermore, to isolate Sr(II) from the HLLW, adsorption and separation performances of Sr(II) and some other FP elements were studied by using a novel silica-based crown ether extraction resin, DtBuCH18C6/SiO₂P. The experimental results demonstrated that the elements in the simulated MA-effluent can be successfully separated to (1) Pd, (2) MA-hRE and (3) Zr–Mo, by CMPO/SiO₂P packed column using water and a dilute DTPA solution as eluents. Am(III) and Cm(III) are expected to be effectively separated from light RE(III) and Y(III) by the SiSCR cationic resin. However, more effective separation between Am(II), Cm(III) and heavy RE(III) such as Eu(III), Gd(III) and Dy(III) needs further approach. DtBuCH18C6/SiO₂P showed a highly selective adsorption for Sr(III) so that the Sr(II) could be completely separated from other FPs except a portion of Ba(II).     

Comparison of coal hydroliquefaction catalysed by ZnCl2-MCln (CuCl,CrCl3 and MoCl5) and ZnCl2 melts

Hydrogenation of four bituminous coals impregnated with 5 wt% of either mixtures of ZnCl₂-MCl_n (CuCl, CrCl₃ and MoCl₅) systems or ZnCl₂ was carried out using a batch autoclave system at 400° for 3 h at 9.8 MPa of initial hydrogen pressure. The ZnCl₂-MoCl₅ system showed the highest yield of the hexane-soluble (HS) fraction compared with the other systems irrespective of the coal used. The difference between the yields of HS fractions using the ZnCl₂-MoCl₅ and other systems was most marked for coals of fairly low volatile matter content, though the conversion was relatively low (47–66%), whilst for coals of high volatile matter content HS yields with the binary melt systems were high (86–91% conversion). Elemental analyses of the HS fractions indicated that the ZnCl₂-MoCl₅ system is most favourable in decreasing the average molecular weight and the heteroatom content of HS, this characteristic trend being confirmed also with five HS fractions separated by Chromatographic techniques. Both elemental analyses and molecular weights of asphaltene (benzene-soluble materials, BS) indicated that the ZnCl₂-MoCl₅ system is also most effective in cracking coal structure.     

Synthesis and properties of bismaleimide resins containing ether bonds

New bismaleimides containing ether bonds were prepared. The thermal properties of the bismaleimides were investigated by differential scanning calorimetry (DSC). The effects of structure of the bismaleimides and curing conditions on the thermal and mechanical properties of the cured resins such as initial decomposition temperature (T_d), glass transition temperature (T_g), and flexural strength were studied. The introduction of ether bonds to bismaleimide resins decreased the brittleness of the resins without reductions in their heat-resistant properties.     

Electron-microscopic procedure for acrylic rubber

The electron-microscopic visualization of acrylic rubber dispersed in a heterogeneous structural resin composition consisting of a rubber-modified two-phase plastic comprising essentially a butyl acrylate rubber phase and an acrylonitrile–styrene copolymer phase, respectively, has been accomplished. This procedure consists of the following: The molded resin specimen is treated with hydrazine hydrate solution to produce the acrylic acid hydrazides. Allow the treated specimen to soak in osmium tetroxide solution. The acrylic rubber may be indirectly fixed and stained. Some micrographs of ultrathin sections of two or three resin compositions, cut by an ultramicrotome, are presented.