Efficacy of interferons in treating children with chronic hepatitis C

Twenty-two children with chronic hepatitis serologically positive for hepatitis C virus (HCV) were treated with interferon-alpha (IFN-alpha). Liver biopsy showed chronic active hepatitis in 13 and chronic persistent hepatitis in 9 patients. A sustained clearance of HCV was observed in 8/22 children 12 months after the administration of IFN-alpha for 26 weeks, associated with normalization of HCV core antibody. Of these eight patients six had HCV genotype III and two HCV genotype II or IV. Hepatitis relapsed in seven other patients after completion of IFN-alpha with an increase in HCV core antibody titre, five with HCV genotype II, and two with HCV genotype III or IV. A second course of IFN-alpha suppressed the reactivation of HCV in all seven patients. Three of seven responders who relapsed after the first course remained negative for HCV RNA 12 months after their second course of IFN-alpha. However, the remaining four patients with HCV genotype II again relapsed after completing their second course of IFN-alpha. Seven children with the HCV genotype II resistant to IFN, including 8 weeks of IFN-beta administration, and showed no significant reduction in HCV core antibody titre. CONCLUSION: The genotype of HCV (III) and a reduction in the core antibody titre appear to be useful parameters for predicting the response to IFN-alpha therapy.     

Rapid detection cytomegalovirus pneumonia in recipients of bone marrow transplant: evaluation and comparison of five survey methods for bronchoalveolar lavage fluid

To detect cytomegalovirus-associated interstitial pneumonia (CMV-IP) in recipients of BMT in its earliest stage, five CMV methods were assessed for their usefulness using bronchoalveolar lavage fluid as the test specimen. Of the 43 cases enrolled in the study, PCR was positive in 12 cases, shell vial in eight, culture in eight and cytology in three. There were no positive cases in in situ hybridization. Based on this result, the 43 cases were classified into four groups: Group 1, three cases: positive in PCR, shell vial and cytology; Group 2, five cases: positive in PCR and shell vial; Group 3, four cases: positive only in PCR; and Group 4, 31 cases: negative in all CMV tests. Cases in Group 1 were judged as having the highest risk of overt CMV-IP. They were successfully treated with a combination of ganciclovir and immunoglobulin. Group 2 was diagnosed as having active CMV infection and ganciclovir monotherapy was effective for these patients. Groups 3 and 4 were not given anti-CMV therapy, but they were free from CMV-related manifestations throughout the study. The sensitivity and specificity of each survey method for the detection of Groups 1 and 2 were 1.0 and 0.89 in PCR, 1.0 and 1.0 in shell vial, 0.88 and 1.0 in culture, and 0.38 and 1.0 in cytology. Similarly, the positive and negative predictive values were 0.67 and 1.0 in PCR, 1.0 and 1.0 in shell vial, 1.0 and 0.97 in culture, and 1.0 and 0.88 in cytology. Thus, CMV survey on bronchoalveolar fluid was thought to be useful in detecting post BMT CMV-IP in its earliest stage.     

Heat Generation in Multilayer Piezoelectric Actuators

Multilayer piezoelectric actuators when driven under high frequency, generate significant heat, which influences the reliability and other piezoelectric properties. In this paper, heat generation in various types of multilayer PZT-based actuators was studied. Experimental results showed that heat generation is mainly caused by ferroelectric hysteresis loss in the stress-free state. A simplified analytic method was established to evaluate the temperature rise, which is useful for the design of multilayer and other high-power actuators.     

Measurement method of high Tc superconductingcoplanar lines

Broadband measurements have been done on high T_c superconducting coplanar lines of YBa₂Cu₃O ₇ on [100]MgO substrates. From the transmission and reflection coefficients of coplanar lines, the characteristic impedance, attenuation constant, phase constant, group velocity, and London penetration depth of the film are derived, based on the circuit models     

Intrinsic Elastic, Dielectric, and Piezoelectric Losses in Lead Zirconate Titanate Ceramics Determined by an Immittance-Fitting Method

The material coefficients of "soft" and "hard" lead zirconate titanate (PZT) ceramics were determined as complex values by the nonlinear least-squares-fitting of immittance data measured for length-extensional bar resonators. The piezoelectric d -constant should be a complex value to obtain a best fitting between observed and calculated results. Because the elastic, dielectric, and piezoelectric losses determined in this process were not "intrinsic" losses, a calculation process to evaluate the "intrinsic" losses was proposed. It was confirmed that the intrinsic losses were smaller than the corresponding extrinsic losses. The intrinsic piezoelectric loss existed in both soft and hard PZTs; ∼50% of the loss of piezoelectric d -constant was derived from the elastic and dielectric losses. The most notable difference between the soft and hard PZTs was observed in their elastic losses.     

湖泊沉积物对17β雌二醇的降解效能

沿湖泊沉积物垂直高度取表层（SL,0～2cm）、中层（ML,14～16cm）、底层（BL,28～30cm）3层底泥微生物为对象,研究了湖泊沉积物对17β-雌二醇（17β-estradiol,E2）的生物降解效能。结果表明：无论在好氧还是厌氧条件下,E2及其副产物雌激素酮（estrone,E1）的降解行为与沉积物沉积深度和环境温度有密切关系：底泥沉积深度愈深,E2降解速率愈低;在微生物活性温度范围内,环境温度愈高,E2降解速率愈高。好氧条件下,湖泊沉积物中E2降解反应的k值为0.002～0.120h^-1·g^-1·L;厌氧条件下,k值为0.002～0.057h^-1·g^-1·L。由于诱导驯化及有机物竞争关系减小等原因,向反应体系中再次添加E2后,其k值增大约34%。湖泊沉积物中硝化细菌的存在对E2降解具有促进作用。     

Numerical computation of two-loop box diagrams with masses

A new approach is presented to evaluate multi-loop integrals, which appear in the calculation of cross-sections in high-energy physics. It relies on a fully numerical method and is applicable to a wide class of integrals with various mass configurations. As an example, the computation of two-loop planar and non-planar box diagrams is shown. The results are confirmed by comparisons with other techniques, including the reduction method, and by a consistency check using the dispersion relation.     

Structure and properties of poly(vinyl alcohol)/κ‐carrageenan blends

Blends of a commercial atactic poly(vinyl alcohol) (a‐PVA) derived from vinyl acetate and κ‐carrageenan were prepared by mixing the aqueous solutions of both samples. Blend films prepared by casting were transparent. In the DSC curves of the blend films, the endothermic peaks shifted to lower temperature with an increase of the content of κ‐carrageenan. The Young's modulus and the strength at break increased with an increase of the content of a‐PVA. As the standing temperature of the blend solutions decreased, the gelation region increased also at high content of carrageenan. In the amorphous regions of blend films, a‐PVA and κ‐carrageenan were miscible. © 2001 Society of Chemical Industry     

Efficiency and polarization performance of a multilayer-coated laminar grating in the 6.5-6.9-nm wavelength region

We applied a Mo/B4C multilayer coating to a laminar holographic grating with 2400 grooves/mm and a 1-m radius of curvature. By use of synchrotron soft x rays the multilayer-coated grating was evaluated to have diffraction efficiencies of 3.1% and 0.017% for s- and p-polarized radiation, respectively, at a 6.7-nm wavelength at a 45.35 degrees grazing angle of incidence in the +1 (inside) grating order. Thus the polarizance was estimated to be 98.9% at least. The zero-order peak was suppressed by the destructive interference caused by the groove profile.     

A torsional transducer through in-plane shearing of paired planar piezoelectric elements

A torsional microtransducer for high-power applications was developed using standard bulk lead zirconium titantate (PZT) placed upon a small rectangular prism made from phosphor bronze, with a tapered conical end serving as a horn and a machined interior to improve the actuator's response. Torsion was obtained from a prototype at the design frequency of 192 kHz as well as over a wide range of frequencies from 136 kHz to 1.02 MHz. Torsional vibration velocities of 335 mm/s at 192 kHz were measured at 27.3 V(RMS) on the 1.5-mm diameter output tip, amounting to 25,600 degree/s vibration velocity along the outer circumference of the tip. At 1.02 MHz, a torsional vibration velocity of 1750 mm/s (134,000 degree/s) at 17.8 V(RMS) was obtained through use of the thickness mode of the PZT elements. Using the design described in this study, high-power torsional transducers with diameters of 5 mm and below are now possible.