Improved image interpreting and modeling technique for automated structural optimization system

The automated structural optimization system (ASOS) proposed in the previous work incorporates the image-preprocessing techniques, the image-interpreting technique, and the automated shape-optimization modeling techniques to successfully obtain an autonomously integrated topology and shape optimization. However, the characteristic value-based image-interpreting technique used in ASOS is unable to accurately interpret complicated hole shapes, necessitating the use of the hole shape-adjusting strategy in addition to the hole-expanding strategy and the interference analysis in the automated shape-optimization modeling techniques to obtain a viable initial design and side constraints of design variables. In order to solve the above-mentioned problem in ASOS, this paper proposes the improved automated structural optimization system (IASOS) and uses the polygonal image-interpreting technique to replace the characteristic value-based image-interpreting technique used in ASOS. This alteration significantly increases the accuracy of image interpretation. Moreover, it can simplify the process of automated shape-optimization modeling techniques, reduce the design duration, and produce better results.     

具有完美水平取向的红光型热活化延迟荧光材料

如何实现发光材料跃迁偶极矩取向的调控一直是有机发光二极管(OLEDs)领域的巨大挑战之一.本文中,我们基于双位点长轴延伸策略,设计合成了一种线型的热活化延迟荧光(TADF)分子,PhNAI-PMSBA,实现了对跃迁偶极矩取向的选择性调控.由于PhNAI-PMSBA具有显著的水平分子取向,且其分子长轴与跃迁偶极矩取向高度...     

Growth of large-sized graphene thin-films by liquid precursor-based chemical vapor deposition under atmospheric pressure

Large-sized thin-films composed of single- and few-layered graphene have been synthesized by chemical vapor deposition (CVD) on copper foils under atmospheric pressure using ethanol or pentane as the precursor. Confocal Raman measurements, transmission electron microscopy and scanning tunneling microscopy show that the majority part of the obtained films exhibit hexagonal graphene lattice. Optical microscopy and electrical measurements confirm the continuity of these films. It is also found that the CVD-grown graphene films with ethanol as the precursor exhibit lower defect density, higher electrical conductivity, and higher hall mobility than those grown with pentane as the precursor. This liquid-precursor-based atmospheric pressure CVD synthesis provides a new route for simple, inexpensive and safe growth of graphene thin-films.     

Optimization of Injection Molding Process for Tensile and Wear Properties of Polypropylene Components via Taguchi and Design of Experiments Method

This study analyzes the wear and the tensile properties of polypropylene (PP) components, which are applied to the interior coffer of automobiles. The specimens are prepared under different injection molding conditions by changing the melting temperature, the injection speed, and the injection pressure via three computer-controlled progressive strokes. The wear and tensile properties are adopted as the quality targets. Experiments of 16 experimental runs are based on an orthogonal array table, and apply the Taguchi method and the design of experiments (DOE) approach to determine an optimal parameter setting. In addition, a side-by-side comparison of two different approaches is provided. In this study, regression models that link the controlled parameters and the targeted outputs are developed, and the identified models can be used to predict the tensile and wear properties at various injection molding conditions.     

Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis

This study investigated the optimization of CNC turning operation parameters for SKD11 (JIS) using the Grey relational analysis method. Nine experimental runs based on an orthogonal array of Taguchi method were performed. The surface properties of roughness average and roughness maximum as well as the roundness were selected as the quality targets. An optimal parameter combination of the turning operation was obtained via Grey relational analysis. By analyzing the Grey relational grade matrix, the degree of influence for each controllable process factor onto individual quality targets can be found. The depth of cut was identified to be the most influence on the roughness average and the cutting speed is the most influential factor to the roughness maximum and the roundness. Additionally, the analysis of variance (ANOVA) is also applied to identify the most significant factor; the depth of cut is the most significant controlled factors for the turning operations according to the weighted sum grade of the roughness average, roughness maximum and roundness.     

Soldering of solution-processed organic vertical transistor and light-emitting diode on separate glass substrates by tin micro-balls

The vertical organic space-charge-limited transistor made of P3HT and small-molecule phosphorescent organic light-emitting diode (OLED) are made on two separate glass substrate by blade coating, then soldered vertically together by tin balls with 40 μm diameter. The soldering is done by hot wind of 150 °C for 5 min Contact resistance is only 10 Ω. The vertical transistor is annealed at 150 °C for 5 min before soldering to enhance the output current up to 25 mA/cm² and give high thermal stability. Both OLED and the annealed vertical transistor are not affected by the soldering process. The vertical transistor has 1/4 of the OLED area and turns on the bottom-emission white OLED up to 300 cd/m² and orange OLED up to 600 cd/m². The entire operation is within 8 V. OLED and transistor array can therefore be made on separate glass substrates then soldered together to form the display.     

Investigation of low-temperature electroluminescence of InGaN/GaN based nanorod light emitting arrays

For InGaN/GaN based nanorod devices using a top-down etching process, the optical output power is affected by non-radiative recombination due to sidewall defects (which decrease light output efficiency) and the mitigated quantum confined Stark effect (QCSE) due to strain relaxation (which increases internal quantum efficiency). Therefore, the exploration of low-temperature optical behaviors of nanorod light emitting diodes (LEDs) will help identify the correlation between these two factors. In this work, low-temperature electroluminescent (EL) spectra of InGaN/GaN nanorod arrays were explored and compared with those of planar LEDs. The nanorod LED exhibits a much higher optical output percentage increase when the temperature decreases. The increase is mainly attributed to the increased carriers in the quantum wells for radiative recombination. Also, due to a better spatial overlap of electrons and holes in the quantum wells, the increased number of carriers can be more efficiently recombined in the nanorod device. Next, while the nanorod array shows nearly constant peak energy in the EL spectra at various injection currents at the temperature of 300 K, a blue shift has been observed at 190 K. The results suggest that with less non-radiative recombination and thus more carriers in the quantum wells, carrier screening and band filling still prevail in the partially strain relaxed nanorods. Moreover, when the temperature drops to 77 K, the blue shift of both nanorod and planar devices disappears and the optical output power decreases since there are fewer carriers in the quantum wells for radiative recombination.     

Evaluation of various silver-containing dressing on infected excision wound healing study

Silver-containing dressings have been widely used for controlling wound infection. However, the relationship between different concentrations of silver in dressings and their antimicrobial activities and wound-healing efficacies remains unclear. In the present study, we (in cooperation with Bio-medical Carbon Technology) investigated various silver-containing activated carbon fibers to understand the effects of different silver concentrations on the efficacies of a silver containing dressing. Our results indicated that various silver-containing activated carbon fibers exhibited good antibacterial effects and biocompatibility in terms of cell viability and that silver concentration showed a minor influence on cell growth. The infected excision wound model indicated that compared to silver-containing activated carbon fiber and other commercial silver-containing dressings assisted wound healing by promoting granulation and collagen deposition. Meanwhile, the silver ion can only be restrained in epidermis by intact skin. During application on the wound area, a temporary increase of serum silver can be detected, but this elevated serum silver level decreased to a subtle level after the removal of silver-containing activated carbon fiber.     

Moderating effects of three coping strategies and self-esteem on perceived discrimination and depressive symptoms: A minority stress model for Asian international students.

This study examined 3 coping strategies (reflective, suppressive, and reactive), along with self-esteem, as moderators of the relation between perceived discrimination and depressive symptoms. International students (N = 354) from China, India, Korea, Taiwan, and Hong Kong provided data via an online survey. The role of perceived general stress was statistically controlled. Hierarchical regression analyses indicated a significant direct effect of perceived discrimination, a significant 2-way interaction of perceived discrimination and suppressive coping, and a significant 3-way interaction of perceived discrimination, reactive coping, and self-esteem in predicting depressive symptoms. An increased tendency to use suppressive coping appeared to strengthen the association between perceived discrimination and depressive symptoms. In contrast, the association between perceived discrimination and depressive symptoms was not significant when reactive coping was infrequently used, but only for students with relatively high self-esteem. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Plasma lipid regulatory effect of compounded freshwater clam hydrolysate and Gracilaria insoluble dietary fibre

This study investigates the hypocholesterolemic effects of a diet containing freshwater clam hydrolysate (PX) and insoluble dietary fibre from whole Gracilaria (IDF). Freshwater clam meat and whole dried Gracilaria were separately extracted using hot water. The residual meat was hydrolysed at 50 °C by Protamex to obtain freshwater clam hydrolysate (PX). Levels of triacylglycerol and cholesterol in Sprague–Dawley (SD) rats were compared with those of rats fed diets containing casein and cellulose as a control. Plasma triacylglycerol levels decreased by 65.8%, 27.9%, and 44.3%, respectively, in PX10 (16.6% hydrolysate), IDF10 (13.0% IDF) and compounded PX10/IDF10 groups, while plasma total cholesterol levels decreased by 26.1%, 24.2%, and 17.1%, respectively. In the liver, triacylglycerol levels decreased by 27.6%, 21.0%, and 28.0%, respectively, while total cholesterol levels decreased by 50.0%, 38.5%, and 48.6%, respectively. The compound PX10/IDF10 diet group showed a higher excretion of faecal total cholesterol and bile acids levels than did the other groups.