Influence of Cu<Superscript>2+</Superscript> ions on structural and magnetic properties of NiZn ferrites

The paper is devoted to the preparation of NiZn ferrite with small substitutions of copper by means of ceramic technology. The influence of small Cu substitution on the microstructural and magnetic properties of NiZn ferrites have been analysed by means of various experimental methods and interpreted from the point of view of preparation technology optimisation and possible applications of such materials. A strong correlation between the substituent content and resulting properties has been observed, thus allowing preparation of material with the properties tailored for any particular application.     

Autoxidation of Hydrocarbons: From Chemistry to Catalysis

This contribution summarizes our recent efforts to unravel the radical chemistry of autoxidations. Abstraction of the weakly bonded αH-atom of the primary hydroperoxide product by chain carrying peroxyl radicals is identified as the source of major end products such as alcohol and ketone/aldehyde. In the case of cyclohexane autoxidation, this reaction is even responsible for the majority of ring-opened by-products. In a second part, different approaches to autoxidation catalysis are discussed, ranging from transition metal ion catalysis to organocatalysis with immobilized N-hydroxyphthalimide.     

Taste recognition threshold concentrations of styrene in oil-in-water emulsions and yoghurts

Taste recognition threshold concentrations (TRTC) of styrene were determined in samples of oil-in-water emulsions (30–300 g kg^?1 oil) and yoghurts (1–30 g kg^?1 fat), spiked with styrene. The observed TRTC increased linearly with increasing fat content and ranged from 0–3 to 2–1 mg kg^?1 for the emulsions and from 36 to 171 g kg^?1 for the yoghurts. Styrene equilibrium partition coefficients between emulsions and their respective vapour phases were determined. The concentrations of styrene in the continuous aqueous phase of the emulsions and yoghurts were calculated at the TRTC. The styrene concentrations in the continuous phase had constant values of about 15 g kg^?1 indicating that perception of styrene for oil-in–water emulsions is determined by the aqueous phase of the emulsion. The concentrations of styrene in the vapor phases above the emulsions and yoghurts were also calculated and were found to be constant at the TRTC. This relationship probably resulted from the equilibrium of distribution of styrene between the respective phases. Commercial yoghurt packed in polystyrene beakers contained styrene levels in the range 2–11 g kg^?1, much lower then the TRTC reported.     

Correction to: “SPOCU”: scaled polynomial constant unit activation function

Neural Computing and Applications - Addendum on SPOCU fitting and Erratum.     

Further study on the one-pot synthesis of (E)-2-nonenal from castor oil

A one-step procedure is described for the synthesis of (E)-2-nonenal from commercial castor oil by ozonolysis in methanol, followed by reduction of the ozonide products with dimethyl sulfide and exposure of the resulting intermediate product to dilute sulfuric acid. The developed process allows the production of the aldehyde with a yield of 80% at a purity of 95%. The method has advantages over all those reported earlier, because of inexpensive raw material and reducing agent, recycling of the solvent and its unusual simplicity.     

Property-composition relationships for diesel and kerosene fuels

A range of 18 diesel fuels and 21 kerosene fuels from mainly Australian petroleum and synthetic fuel sources, including coal, shale and peat, was investigated. Compositional details were defined as the weight per cent abundances of n-alkanes, branched plus cyclic saturates, single-ring aromatics, doublering aromatics and polynuclear aromatics, using both h.p.l.c. and ¹³C n.m.r. techniques. Relationships between fuel composition and a range of fuel properties were sought. Simple linear relationships between property values and compositional data were used. Explicit correlative expressions were derived using multiple linear regression analysis, with the coefficient of multiple determination, R², indicating the quality of the fit between observed and calculated property values. In most cases good correlations were achieved. For diesels the properties investigated, with R² values in parentheses, were: inverse specific gravity (0.99); ¹³C n.m.r. aromaticity (0.99); ¹H n.m.r. aromaticity (0.88); cetane index (0.97); aniline point (0.96); diesel index (0.98); and FIA-measured aromatics content (0.77). For kerosenes the properties, with R² values in parentheses, were: ¹³C n.m.r. aromaticity (0.98); ¹H n.m.r. aromaticity (0.97); smoke point (0.88); and FIA-measured aromatics content (0.94). The results are shown to be of value in assessing the potential and limitations of hydrotreating as a process for upgrading synfuels.     

Selected elements of rock burst state assessment in case studies from the Silesian hard coal mines

Exploitation of coal seams in the Upper Silesian Coal Basin is conducted in complex and difficult conditions. These difficulties are connected with the occurrence of many natural mining hazards and limitations resulting from the existing in this area surface infrastructure. One of the most important problems of Polish mining is the rock burst hazard and reliable evaluation of its condition. During long-years' mining practice in Poland a comprehensive system of evaluation and control of this hazard was de-veloped. In the paper the main aspects of rock burst hazard state evaluation will be presented, comprising: 1) rock mass inclination for rock bursts, I.e., rock strength properties investigation, comprehensive parametric evaluation of rock mass inclination for rock bursts, prognosis of seismic events induced by mining operations, methods of computer-aided modelling of stress and rock mass deformation parameters distribution, strategic rock mass classification under rock burst degrees; 2) immediate seismic and rock burst hazard state evaluation, I.e., low diameter test drilling method, seismologic and seismoacoustic method, comprehensive method of rock burst hazard state evaluation, non-standard methods of evaluation; 3) legal aspects of rock burst hazard state evaluation. Selected elements of the hazard state evaluation system are illustrated with specific practical examples of their applica-tion.     

Cross-property connections for copper–graphite composites

Copper–graphite composite materials in the range of 0–10 vol% of carbon phase were prepared from the mixture of copper and graphite powders by hot isostatic pressing. The microstructure, mechanical (tensile strength, elongation to fracture) and physical (electrical and thermal conductivity) properties of composite samples were investigated, and the cross-property connections were calculated. It was shown that electrical and thermal conductivity cross-property (Lorenz number) is almost constant and increases only slightly (no more than 10 % increase was observed). This implies that in the investigated composition range the Lorenz number of a copper–graphite composite system behaves according to Franz–Wiedemann law for pure metals at constant temperature. On the contrary, the conductivity to tensile strength cross-property connections showed significant linear increase (over 200 % in the investigated composition range) for both electrical conductivity and thermal conductivity of composite materials. The cross-property connections of conductivity to the elongation to fracture exhibit a nonlinear dependence on the volume fraction of graphite.     

Slow and fast diffusion effects in image processing

A mathematical model for a nonlinear image multiscale analysis is studied. Processing of an image is based on a solution of the strongly nonlinear parabolic partial differential equation, which can degenerate depending on values of the greylevel intensity function. The governing PDE is a generalization of the regularized (in the sense of Catté, Lions, Morel and Coll) Perona-Malik anisotropic diffusion equation. We present numerical techniques for solving the suggested initial-boundary value problem and also existence and convergence results. Numerical experiments are discussed. Received: 6 May 1998 / Accepted: 27 July 2000