本钢360 m2烧结机的生产实践

本钢360m^2烧结机自2004年8月投产以来，通过不断整改和完善，以及操作、管理水平的不断提高，烧结矿产质量迅速提高。目前，利用系数已达到1．30t／（m^2·h）以上，作业率达到90％以上，烧结矿转鼓指数达到了79．5％。     

Synthesis, characterization, and thermal properties of biodegradable polyetheresteramide-based polyurethane

In this paper, a new kind of biodegradable polyetheresteramide-based polyurethane (PEEA-U) copolymers were prepared by melt polymerization from ε-caprolactone, 6-aminocaproic acid, poly(ethylene glycol), and toluene diisocyanate. The obtained polymers were characterized by ¹H NMR, FTIR, DSC, WAXD, and TGA/DTG. The water absorption, hydrolytic degradation, and alkaline degradation behavior of these copolymers were also studied in detail.     

Fuzzy logic control for a parallel hybrid hydraulic excavator using genetic algorithm

In this paper, fuzzy logic control is put forward in a parallel hybrid hydraulic excavator for the purposes of better energy distribution and higher fuel economy. A mathematical model of parallel hybrid hydraulic excavator is presented in detail, and the parameters of components and overall system are listed and analyzed. The fuzzy logic controller is then designed to cope with energy distribution and management. To achieve better equivalent fuel consumption, genetic algorithm is implemented to fine-tune the membership functions. The control effects are compared between different control strategies, e.g. rule-based control and fine-tuned fuzzy logic control. The results indicate that hybrids with the proposed strategy can improve fuel economy for the excavator without sacrificing any system performance.     

The corrosion and wear resistances of magnesium alloy (LZ91) electroplated with copper and followed by 1 μm-thick chromium deposits

The Mg-Li-Zn alloy, LZ91, is a potential material for industrial application owing to its high specific strength. However, the LZ91 has so high chemical reactivity that it is easily corroded in air and an aqueous environment. In this study, an eco-friendly electrodeposition method was proposed to obtain a protective Cr/Cu coating on the LZ91 substrate. That is, the LZ91 surface electroplated a Cu undercoat in an alkaline Cu-plating bath and followed by decorative 1 μm-thick Cr electroplating in a plating bath with trivalent chromium ions. After electroplating, some of the Cr/Cu-deposited specimens were heated with a reduction flame for 0.5 s to increase the hardness of Cr-deposit. The wear resistance of as-plated and flame-hardened Cr/Cu-coated LZ91 specimens was estimated with ball-on-plate wear tester by using a steel-ball counterpart. Whereas, their corrosion resistance was evaluated in a 0.1 M H₂SO₄ solution before and after wear test. Experimental results show that a Cu deposit could be uniformly electroplated on the LZ91 surface by using our proposed electroplating method. The corrosion resistance of LZ91 was markedly improved after decorative 1 μm-thick Cr electroplating. After wear test, the steel counterpart was ground obviously with either as-plated or flame-hardened Cr/Cu-coated LZ91 specimen. According to the results of electrochemical corrosion test, some parts of the Cr deposit were peeled off from worn flame-hardened Cr/Cu LZ91 surface. This reduces its corrosion resistance significantly. On the other hand, the corrosion resistance of as-plated Cr/Cu LZ91 was not changed after wear test. That is, an as-plated Cr/Cu-coated LZ91 specimen could have good corrosion and wear resistance.     

Synthesis of Biodegradable Poly(butylene terephthalate)/poly(ethylene glycol) (PBT/PEG) Multiblock Copolymers and Preparation of Indirubin Loaded Microspheres

Summary Biodegradable PBT/PEG copolymers were synthesized by macromolecular transesterification method, and were characterized by 1H-NMR and DSC. Alkaline degradation behavior was studied too. Indirubin loaded microspheres were prepared by O/W solvent evaporation method.     

Synthesis, characterization and hydrolytic degradation of degradable poly(butylene terephthalate)/poly(ethylene glycol) (PBT/PEG) copolymers

Hydrolytic degradable PBT/PEG copolymer was synthesized by macromolecular transesterification method from PBT and PEG macromonomers. The resultant copolymers were characterized by ¹H-NMR and GPC. The non-isothermal crystallization behavior of these copolymers was studied by differential scanning calorimetry (DSC). The water absorption and hydrolytic degradation behavior of PBT/PEG copolymers were also studied in detail. This work was partly presented in 6^th ASBM, July 19–22, 2004, Emei City, Chingdu, China. Fan LY is the co-first author for this work.     

Preparation and Characterization of pH Sensitive Semi-interpenetrating Network Hydrogel Based on Methacrylic Acid, Bovine Serum Albumin (BSA), and PEG

In this article, a pH sensitive semi-interpenetrating network (SIPN) hydrogel based on methacrylic acid, BSA, and PEG was prepared by UV initiated free radical polymerization. The swelling behavior and pH sensitivity of these hydrogels were studied in detail. With the increase in pH of the aqueous solution from 1.7 to 9.23, the swelling ratio of these hydrogels increased accordingly. The effect of BSA and crosslinker (BIS) content on the swelling behavior was more complicated, and the results were shown in the text. Deng HX is the co-first author for this article.     

Porous fiber paper and 3D patterned electrodes composed high-sensitivity flexible piezoresistive sensor for physiological signal monitoring

Science China Technological Sciences - The research on flexible pressure sensors has drawn widespread attention in recent years, especially in the fields of health care and intelligent robots. In...