A novel open-loop high-speed CMOS sample-and-hold

A new open-loop high-speed CMOS sample-and-hold is presented. Based on new method for further reduction of voltage-dependent charge injection, a new CMOS sample-and-hold was designed. Simulation results confirm the effectiveness of this method. Over 10 dB improvement in signal-to-noise ratio, compared to the signal-to-noise ratio of conventional bottom plate sampling S/Hs was achieved with this method. A comparison between newly designed S/H and the bottom-plate sampling S/H is presented.     

Preparation and characterization of cellulose acetate organic/inorganic hybrid films

A series of organic/inorganic hybrid (OIH) films were prepared using cellulose acetate (CA) as the organic component and tetraethyl orthosilicate (TEOS) as the inorganic component. The chemical, morphological, and mechanical properties of these films were evaluated with a variety of analytical techniques. The results of these evaluations showed that crosslinked CA OIH films were formed during the sol-gel reactions. The structure of OIH films was very sensitive to the CA/TEOS ratio and film formation conditions. All of the films with added TEOS were two phase on a molecular level, i.e., inorganic TEOS domains surrounded by a CA matrix. Under some film formation conditions the presence of TEOS, a nonsolvent for CA, led to solvent/nonsolvent phase separation on the micron scale. © 1995 John Wiley & Sons, Inc.     

Modification of glassy carbon electrode with multi-walled carbon nanotubes and iron(III)-porphyrin film: Application to chlorate, bromate and iodate detection

In this study, multi-wall carbon nanotubes (MWCTs) is evaluated as a transducer, stabilizer and immobilization matrix for the construction of amperometric sensor based on iron-porphyrin. 5,10,15,20-Tetraphenyl-21H,23H-porphine iron(III) chloride (Fe(III)P) adsorbed on MWCNTs immobilized on the surface of glassy carbon electrode. Cyclic voltammograms of the Fe(III)P-incorporated-MWCNTs indicate a pair of well-defined and nearly reversible redox couple with surface confined characteristics at wide pH range (2-12). The surface coverage (Γ) and charge transfer rate constant (k_s) of Fe(III)P immobilized on MWCNTs were 7.68 × 10⁻⁹ mol cm⁻² and 1.8 s⁻¹, respectively, indicating high loading ability of MWCNTs for Fe(III)P and great facilitation of the electron transfer between Fe(III)P and carbon nanotubes immobilized on the electrode surface. Modified electrodes exhibit excellent electrocatalytic activity toward reduction of ClO₃⁻, IO₃⁻ and BrO₃⁻ in acidic solutions. The catalytic rate constants for catalytic reduction of bromate, chlorate and iodate were 6.8 × 10³, 7.4 × 10³ and 4.8 × 10² M⁻¹ s⁻¹, respectively. The hydrodynamic amperometry of rotating-modified electrode at constant potential versus reference electrode was used for detection of bromate, chlorate and iodate. The detection limit, linear calibration range and sensitivity for chlorate, bromate and iodate detections were 0.5 μM, 2 μM to 1 mM, 8.4 nA/μM, 0.6 μM, 2 μM to 0.15 mM, 11 nA/μM, and 2.5 μM, 10 μM to 4 mM and 1.5 nA/μM, respectively. Excellent electrochemical reversibility of the redox couple, good reproducibility, high stability, low detection limit, long life time, fast amperometric response time, wide linear concentration range, technical simplicity and possibility of rapid preparation are great advantages of this sensor. The obtained results show promising practical application of the Fe(III)P-MWCNTs-modified electrode as an amperometric sensor for chlorate, iodate and bromate detections.     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Adaptive content-and-deadline aware chunk scheduling in mesh-based P2P video streaming

In mesh-based Peer-to-Peer (P2P) live video streaming systems packet scheduling is an important factor in overall video playback quality. In mesh based P2P video streaming systems, each video sequence is divided into chunks, which are then distributed by multiple suppliers to the receivers. The suppliers need to be coordinated by the receiver through specifying a transmission schedule for each of them. Many previous studies on scheduling of P2P streaming tend to mainly focus on networking issues which strongly depend on a particular P2P architecture such as tree or mesh. These algorithms suffer from some design issues: 1) they are too complex to deploy, 2) they do not take video characteristics into account and 3) they do not have sender-side transmission policy. To address all three of these problems, we propose a new chunk scheduling scheme which consists of two parts: i) receiver-side scheduler and ii) sender-side transmission order scheme. The proposed receiver-side scheduler considers the contribution level of each video frame as well as the frame’s urgency in order to define a priority for each video frame. It attempts to request frames with highest priority from peers which can deliver them in a shorter time. We also design a new chunk transmission order scheme that decides which requested chunk will be sent out first based on its importance to the requesting neighbor. Our simulation results show that the proposed scheduling scheme improves the overall quality of the perceived video in mesh-based P2P video streaming architectures substantially.     

Biosynthesised AgCl NPs using Bacillus sp. 1/11 and evaluation of their cytotoxic activity and antibacterial and antibiofilm effects on multi‐drug resistant bacteria

Silver nanoparticles (AgNPs) have attracted the attention of researchers due to their properties. Biological synthesis of AgNPs is eco‐friendly and cost‐effective preferred to physical and chemical methods, which utilize environmentally harmful agents and large amounts of energy. Microorganisms have been explored as potential biofactories to synthesize AgNPs. Bacterial NP synthesis is affected by Ag salt concentration, pH, temperature and bacterial species. In this study, Bacillus spp., isolated from soil, were screened for AgNP synthesis at pH 12 with 5 mM Ag nitrate (AgNO₃) final concentration at room temperature. The isolate with fastest color change and the best ultraviolet‐visible spectrum in width and height were chosen as premier one. AgNO₃ and citrate salts were compared in terms of their influence on NP synthesis. Spherical Ag chloride (AgCl) NPs with a size range of 35–40 nm were synthesized in 1.5 mM Ag citrate solution. Fourier transform infrared analysis demonstrated that protein and carbohydrates were capping agents for NPs. In this study, antimicrobial and antitumor properties of the AgNP were investigated. The resulting AgCl NPs had bacteriostatic activity against four standard spp. And multi‐drug resistant strain of Pseudomonas aeruginosa. These NPs are also cytotoxic to cancer cell lines MCF‐7, U87MG and T293.Inspec keywords: silver compounds, nanoparticles, nanomedicine, nanofabrication, particle size, biomedical materials, microorganisms, ultraviolet spectra, visible spectra, Fourier transform infrared spectra, proteins, macromolecules, antibacterial activity, tumours, cancer, cellular biophysics, toxicologyOther keywords: citrate salts, spherical Ag chloride, particle size, Ag citrate solution, Fourier transform infrared analysis, protein, carbohydrates, capping agents, antitumour properties, bacteriostatic activity, Pseudomonas aeruginosa, multidrug resistant strain, cancer cell lines MCF‐7,U87MG, size 35 nm to 40 nm, temperature 293 K to 298 K, AgCl, ultraviolet‐visible spectrum, colour change, room temperature, Ag nitrate final concentration, soil, bacterial species, temperature effect, pH, Ag salt concentration, biofactories, microorganisms, environmentally harmful agents, chemical methods, physical methods, antibacterial properties, electrical properties, mechanical properties, silver nanoparticles, multidrug resistant bacteria, antibiofilm effects, antibacterial effects, cytotoxic activity, Bacillus sp. 1/11, biosynthesised AgCl NPs     

Predicting performance in ASEAN banks: an integrated fuzzy MCDM–neural network approach

This paper presents a performance assessment of 88 Association of Southeast Asian Nations banks from 2010 to 2013, using an integrated three‐stage approach on financial criteria that emulates the CAMELS rating system. More precisely, fuzzy analytic hierarchy process is used first to assess the relative weights of a number of criteria related to capital adequacy (C), asset quality (A), management quality (M), earnings (E), liquidity (L), and sensitivity to market risk (S) based on the opinion of 88 Association of Southeast Asian Nations experts. Then, these weights are used as technique for order of preference by similarity to ideal solution inputs to assess their relative efficiency. Lastly, neural networks are combined with technique for order of preference by similarity to ideal solution results to produce a model for banking performance with effective predictive ability. The results reveal that contextual variables have a prominent impact on efficiency. Specifically, parsimony in equity leveraging derived from Islamic finance principles may be the underlying cause in explaining higher efficiency levels.     

High throughput blood plasma separation using a passive PMMA microfluidic device

Since plasma is rich in many biomarkers used in clinical diagnostic experiments, microscale blood plasma separation is a primitive step in most of microfluidic analytical chips. In this paper, a passive microfluidic device for on-chip blood plasma separation based on Zweifach–Fung effect and plasma skimming was designed and fabricated by hot embossing of microchannels on a PMMA substrate and thermal bonding process. Human blood was diluted in various times and injected into the device. The main novelty of the proposed microfluidic device is the design of diffuser-shaped daughter channels. Our results demonstrated that this design exerted a considerable positive influence on the separation efficiency of the passive separator device, and the separation efficiency of 66.6 % was achieved. The optimum purity efficiency of 70 % was achieved for 1:100 dilution times.     

A simultaneous planning of production and scheduling operations in flexible flow shops: case study of tile industry

The aim of this paper is to study a simultaneous lot-sizing and scheduling in multi-product, multi-period flexible flow shop environments. A new mixed integer programming (MIP) model is proposed to formulate the problem. The objective function includes the total cost of production, inventory, and external supply. In this study, in case of not meeting the demand of customers, this demand should be met by foreign suppliers in higher price. Due to the high computational complexity of the studied problem, a rolling horizon heuristic (RHH) and particle swarm optimization algorithm (PSO) are implemented to solve the problem. These algorithms find a feasible and near-optimal from production planning and scheduling. Additionally, Taguchi method is conducted to calibrate the parameters of the PSO algorithm and select the optimal levels of the influential factors. The computational results show that the algorithms are capable of achieving results with good quality in a reasonable time and PSO has better objective values in comparison with RHH. Also, the real case study for tile industry with real features is applied. Sensitivity analysis is used to evaluate the performance of the model.