Macromolecular recognition by cyclodextrins. Interaction of cyclodextrins with polymethacrylamides bearing hydrophobic amino acid residues

The interaction of cyclodextrins (CDs) with poly(N-methacryloyltryptophan) (pMTrp) and with poly(N-methacryloylphenylalanine) (pMPhe) was investigated as a simple model system of macromolecular recognition of proteins. The association constants (K) for the model compounds, sodium salts of tryptophan and phenylalanine, are not so different (i.e. 43 and 16 M⁻¹ for α-CD, 59 and 69 M⁻¹ for β-CD, and 12 and 3 M⁻¹ for γ-CD, respectively). On the other hand, there is a significant difference in the apparent K values for pMTrp and pMPhe (i.e. the K values for pMPhe are considerably smaller than ca. 10 M⁻¹, whereas those for pMTrp are 30, 83, and 11 M⁻¹ for α-, β-, and γ-CDs, respectively). These observations indicate that a subtle difference in polymer side chains can be critical in macromolecular recognition.     

Cu-NMR study on high-T c cuprate La1.89Ca1.11Cu2O6+δ (La2126)

Cu-NMR spectra and the nuclear spin-lattice relaxation rate T ₁ ^-1 have been studied intensively on the bilayer type high-T_c cuprate La_1.89Ca_1.11Cu₂O₆₊ (La2126). The resonance line shift showed a monotonic decrease with lowering temperature in the normal state, indicating that this compound belongs to the lightly-doped region. The Curie-Weiss temperature dependence of (T₁T)^–1 in the normal state shows that the pseudo spin-gap does not always exist in the light-doped bilayer systems.     

Thermal conductivity and phonon scattering mechanisms in La#x2212;x#x2212;x#x2212;xMxCuO4

The thermal conductivity of high density La_2–xM_xCuO₄ (M=Ba, Sr) sintered materials was measured between 15K and 150K for the various concentrations of Ba and the phonon thermal conductivity was analyzed comparing with that of Nd_2–xCe_xCuO₄. The pretty large value for pure La₂CuO₄ was drastically diminished by substituting La by a small amount of Ba atoms especially at low temperatures. It was found that a new type of the phonon scattering center such as a two-level tunneling must be taken account of in order to explain the observed reduction.     

Superconductivity of Zr-Nb-Si amorphous alloys

Superconducting amorphous alloys with high strength and good ductility have been found in rapidly quenched alloys of the Zr-Nb-Si system. These alloys were produced in a continuous ribbon form of 1 to 2 mm width and 0.02 to 0.03 mm thickness using a modified single roller quenching apparatus. The amorphous alloys were formed over the whole composition range between zirconium and niobium, but the silicon content was limited to the relatively narrow range between about 12 and 24 at%. All the amorphous alloys showed a superconducting transition whose temperature, T _c, increased from 2.31 to 4.20 K with increasing niobium content or with decreasing silicon content. The upper critical magnetic field, H _c2, and the critical current density, J _c, for Zr₁₅Nb₇₀Si₁₅ alloy were of the order of 4.5 Tesla(T) and 5.5×10⁶ A m^–2 at 1.5 K in the absence of applied field. The upper critical field gradient at T _c, , and the electrical resistivity at 4.2 K, _n, decreased from 2.89 to 2.10 T K^–1 and from 2.70 to 1.80m, respectively, with the amount of niobium. The Debye temperature, _D, the electron-phonon coupling constant, , and the bare density of electronic states at the Fermi level, N(E _f ) were calculated from the experimentally measured values of _n, , Young's modulus and density by using the strong-coupling theories. From the comparison of T _c with their calculated parameters, it was found that is the most dominant parameter for T _c. The GL parameter, , and the GL coherence length, _GL(0), were estimated to be 70 to 100 and about 7.6 nm, respectively, from the experimental values of and _n by using the GLAG theory and hence it is concluded that the present amorphous alloys are an extremely dirty type-II superconductor having a very weak flux pinning force.     

Thermodynamic study and intrinsic type II superconductivity in the A-15 compound V3Si

The specific heat of a single crystal of the A-15-type compound V₃Si in the normal, mixed, and superconducting states has been measured from 4 to 30 K in magnetic fields up to 50 kOe. The analysis has been performed in a self-consistent way based on the second-order phase transition from the normal to the superconducting state. The thermodynamic critical field and then various physical parameters characterizing the superconducting and normal states are almost consistently derived from the thermodynamics and the microscopic BCS-GLAG theory. It is confirmed that V₃Si is an intrinsic type II superconductor with a high intrinsic GL parameter ₀.This work was partially supported by a Grant in Aid for Scientific Research (B) from the Ministry of Education.     

Improvement in thermal endurance of D-mannitol as phase-change material by impregnation into nanosized pores

This paper describes the control of the melting point and improvement of the thermal endurance of D-mannitol (melting point T_m = 440 K) as a phase-change material (PCM) by vacuum impregnation of the PCM into nanosized pores of porous SiO₂ grains. First, we examined the effects of the average pore size (D_P) of porous SiO₂ on T_m and latent heat (L) of PCM/SiO₂ composites. Second, we investigated the thermal endurance of the composites using constant temperature kinetics based on L of the PCM and composites. Third, we performed cyclic tests of melting and freezing on the composite to evaluate leakage of the PCM. Thermophysical properties of the samples were measured by differential scanning calorimetry, and the following results were obtained: (1) The impregnation ratio of the composites was 0.91–0.99; therefore, almost all pores were completely filled with the PCM. (2) T_m shifted to lower temperature with smaller D_P, reaching 413 K in case of the PCM/SiO₂ composite with a D_P of 11.6 nm (3) T_m was derived as a function of D_P from the Gibbs–Thomson equation taking into account the existence of a nonfreezing layer on the surface of the pore wall. (4) The duration of thermal degradation of the PCM/SiO₂ composite with D_P = 11.6 nm was three times longer than that of the pure PCM at a temperature that is 10 K more than each melting point. (5) The PCM/SiO₂ composite with D_P = 11.6 nm can use as a shape-stable PCM composite without leakage of PCM.     

Measurement invariance of the Gifted Rating Scales—School Form across five cultural groups.

This study examined measurement invariance of the Gifted Rating Scales—School Form (GRS–S) across the United States, Puerto Rico, China, South Korea, and Turkey, using multigroup confirmatory factor analysis. A total of 1,817 students were rated by 287 teachers using either translated versions of GRS–S or the original English GRS–S. Results indicate a similar factor structure for the GRS–S across the five locations; six factors with each of the 72 items equivalently loaded to the same latent variable across groups. The metric invariance test and the factor variance and covariance invariance tests reveal that the patterns of factor loadings and the factor variances and covariances are invariant across the five groups. Moreover, the scalar invariance test indicates that item means are equivalent across the groups. These results suggest that the GRS–S has intercultural utility and can be similarly interpreted. Implications and limitations of the present research for gifted identification are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Strong Surface‐Termination Effect on Electroresistance in Ferroelectric Tunnel Junctions

Tunnel electroresistance in ferroelectric tunnel junctions (FTJs) has attracted considerable interest, because of a promising application to nonvolatile memories. Development of ferroelectric thin‐film devices requires atomic‐scale band‐structure engineering based on depolarization‐field effects at interfaces. By using FTJs consisting of ultrathin layers of the prototypical ferroelectric BaTiO₃, it is demonstrated that the surface termination of the ferroelectric in contact with a simple‐metal electrode critically affects properties of electroresistance. BaTiO₃ barrier‐layers with TiO₂ or BaO terminations show opposing relationships between the polarization direction and the resistance state. The resistance‐switching ratio in the junctions can be remarkably enhanced up to 10⁵% at room temperature, by artificially controlling the fraction of BaO termination. These results are explained in terms of the termination dependence of the depolarization field that is generated by a dead layer and imperfect charge screening. The findings on the mechanism of tunnel electroresistance should lead to performance improvements in the devices based on nanoscale ferroelectrics.     

Discovery of a Novel Scaffold as an Indoleamine 2,3‐Dioxygenase 1 (IDO1) Inhibitor Based on the Pyrrolopiperazinone Alkaloid,Longamide B

Indoleamine 2,3‐dioxygenase 1 (IDO1) has emerged as a key target for cancer therapy, as IDO1 plays a critical role in the capacity of tumor cells to evade the immune system. The pyrrolopiperazinone alkaloid longamide B and its derivatives were identified as novel IDO1 inhibitors based on docking studies and small library synthesis. The thioamide derivative showed higher IDO1 inhibitory activity than longamide B, and displayed an activity similar to that of a representative IDO1 inhibitor, 1‐methyl‐tryptophan. These results suggest that the pyrrolopiperazinone scaffold of longamide B could be used in the development of IDO1 inhibitors.     

Current Pumping from Spin Dynamics

We show theoretically that charge and spin currents arise from spin dynamics in the presence of the spin–orbit interaction. The dominant calculation is the inverse spin Hall effect, namely the spin current pumped from precession of local spins is converted into the charge current by the spin–orbit interaction. The conversion mechanism is explained based on the conservation laws of charge and spin.