Natural convection from a semi-infinite flat plate inclined at a small angle to the horizontal in a saturated porous medium

Summary The free convection boundary layer on a semi-infinite heated flat plate which is inclined at a small angle to the horizontal in a saturated porous medium is considered. When the plate is inclined upwards, series solutions, one valid near the leading edge and the other valid at large distances from it, are obtained. Sufficient terms in the leading edge solution are taken so that the two asymptotic solutions may be joined. When the plate is inclined downwards the series solution valid near the leading edge is again obtained and sufficient terms are again employed to investigate the nature of the boundary layer separation. There is no evidence of a singularity at the separation point and a mathematical explanation of the behaviour at separation is presented.With 10 Figures     

Response spectrum analysis of piping systems with elastic-plastic gap supports

A new seismic support device and its application in piping systems is described. The device, E-BAR (patented), can be cost effectively used for snubber replacement programs, mitigation of hydraulic transients, pipe whip and as a thermal stop. The device has pre-set gaps to allow free thermal movement. During a seismic or other dynamic load event, if the pipe movement exceeds the gap dimension, the device acts as an elastic or elastic-plastic restraint. The device also has a unique design feature for not exceeding the restraint force beyond a specified limit design value. To analyze piping systems with gap supports having elastic-plastic characteristics, modal analysis procedures for both response spectrum and time history methods are developed. The comparison of responses obtained from the procedures with nonlinear time history analysis and test results available in the literature shows excellent correlation. A pilot program conducted for snubber replacement with E-BARs demonstrates that the limit force feature of E-BAR makes them very attractive for snubber replacement. This is because a particular E-BAR with a specified limit design force can be selected, such that, the E-BAR replacing the snubber does not require any modifications be made to the existing support steel and hardware.     

Resistive and magnetic properties of Y1−x Zr x Ba2Cu3O7−δ and Y1−2x Zr x Eu x Ba2Cu3O7−δ superconductive compounds

The results of X-rays, electrical resistivities and magnetic studies performed on Y_−x Zr _x Ba₂Cu₃O_t7−δ and Y_1−2x Zr _x Eu _x Ba₂Cu₃O_7−δ superconducting compounds, in the temperature range 4.2–500 K and external fields up to 50 kOe are reported. The presence of zirconium decreases the superconducting transition temperatures,T _c. BelowT _c, the hysteresis loops narrow when the zirconium content increases. From the magnetization curves, the critical current densities were determined. A time dependence of the magnetizations of logarithmic form was found. The flux-pinning energy was estimated to beU ≃0.03 eV. Above the transition temperatures, Y_−x Zr _x Ba₂Cu₃O_t7−δ samples show a Pauli-type paramagnetism, while Y_1−2x Zr _x Eu _x Ba₂Cu₃O_7−δ compounds have, in addition, temperature-dependent contributions to the magnetic susceptibilities. The effective europium moments are ∼3.40 μ_B suggesting that the ion is in (+3) valence state.     

Non-darcy natural convection from a heated vertical plate in saturated porous media with mass transfer

The nonsimilar and self-similar flows for the steady natural convection over a vertical heated surface in a saturated porous medium with mass transfer using non-Darcy model have been studied under boundary layer approximations. The differential equations governing both the nonsimilar and self-similar flows have been solved numerically using an implicit finite-difference scheme developed by Keller. The results indicate that both heat transfer and velocity field are appreciably affected by the modified Grashof number and mass transfer except that the effect of the modified Grashof number on the heat transfer for large suction is very small. It is found that the maximum velocity occurs at the wall and it increases as the modified Grashof number or injection increases.     

Turbulent Details Simulation for SPH Fluids via Vorticity Refinement

A major issue in smoothed particle hydrodynamics (SPH) approaches is the numerical dissipation during the projection process, especially under coarse discretizations. High‐frequency details, such as turbulence and vortices, are smoothed out, leading to unrealistic results. To address this issue, we introduce a vorticity refinement (VR) solver for SPH fluids with negligible computational overhead. In this method, the numerical dissipation of the vorticity field is recovered by the difference between the theoretical and the actual vorticity, so as to enhance turbulence details. Instead of solving the Biot‐Savart integrals, a stream function, which is easier and more efficient to solve, is used to relate the vorticity field to the velocity field. We obtain turbulence effects of different intensity levels by changing an adjustable parameter. Since the vorticity field is enhanced according to the curl field, our method can not only amplify existing vortices, but also capture additional turbulence. Our VR solver is straightforward to implement and can be easily integrated into existing SPH methods.     

A new approach to predict ulcerative colitis activity through standard clinical–biological parameters using a robust neural network model

Neural Computing and Applications - Colonoscopy is the “gold” standard for evaluating disease activity in ulcerative colitis (UC). An important area of research is finding a...     

Viscous dissipation and MHD hybrid nanofluid flow towards an exponentially stretching/shrinking surface

Neural Computing and Applications - The impact of viscous dissipation in hybrid nanofluid plays a prominent role in industrial applications, for instance, in polymer processing flows and...     

Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.