An efficient TDMA start-up and restart synchronization approach for distributed embedded systems

A desired attribute in safety-critical embedded real-time systems is a system time and event synchronization capability on which predictable communication can be established. Focusing on bus-based communication protocols, we present a novel, efficient, and low-cost start-up and restart synchronization approach for TDMA environments. This approach utilizes information about a node's message length that forms a unique sequence to achieve synchronization such that communication overhead can be avoided. We present a fault-tolerant initial synchronization protocol with a bounded start-up time. The protocol avoids start-up collisions by deterministically postponing retries after a collision. We also present a resynchronization strategy that incorporates recovering nodes into synchronization.     

Frequency- and depth-dependent compensation of ultrasonic signals

The resolution in ultrasonic images decreases with depth when using traditional time-gain compensation (TGC) of the received signal. To reduce this effect, both frequency-dependent and depth-dependent compensation is introduced. A time-varying digital filtering method is presented for this purpose, which is based on Wiener filtering. Images obtained from a simulated tissue equivalent are presented and the frequency-compensated images are compared to conventional TGC-compensated images. It is shown that the improvement in resolution using frequency-dependent compensation is considerable when the signal-to-noise ratio in the received signal is high.     

Surface properties of surfactants derived from natural products. Part 1: Syntheses and structure/property relationships—Solubility and emulsification

Several novel and some previously known, mostly sugar-based, surfactants have been synthesized and some of their surface properties have been characterized and compared with those of commercial nonylphenol ethoxylates. The surfactant solubility in water, ethanol, and dodecane was studied. The properties of these compounds as emulsification agents in systems composed of the surfactant with water/isopropyl myristate, water/rapeseed oil, and water/dodecane are presented. The aqueous solubility of the surfactants follows the general trend expected from their hydrophilic-lipophilic balance according to Griffin (HLBG), but it is also clear that the nature of the headgroup and the structure of the nonpolar part affect the solubility in a manner not aptured in the standard HLBG concept. An ester or amine group as the connecting unit between the hydrophile and the hydrophobe produces a more water-soluble surfactant than the corresponding amide derivative. Some effective emulsifiers were found. For instance, the surfactants with a dehydroabietic nonpolar group appear to be promosing emulsifiers. Most sugar-based surfactants were able to form macroemulsions of up to around 2 wt/vol% of oil. The stability of many of these amulsions was very high, extending for months.     

Investigation of the potential of asymptotic homogenization for elastic composites via a three-dimensional computational study

Asymptotic homogenization is employed assuming a sharp length scale separation between the periodic structure (fine scale) and the whole composite (coarse scale). A classical approach yields the linear elastic-type coarse scale model, where the effective elastic coefficients are computed solving fine scale periodic cell problems. We generalize the existing results by considering an arbitrary number of subphases and general periodic cell shapes. We focus on the stress jump conditions arising in the cell problems and explicitly compute the corresponding interface loads. The latter represent a key driving force to obtain nontrivial cell problems solutions whenever discontinuities of the coefficients between the host medium (matrix) and the subphases occur. The numerical simulations illustrate the geometrically induced anisotropy and foster the comparison between asymptotic homogenization and well established Eshelby based techniques. We show that the method can be routinely implemented in three dimensions and should be applied to hierarchical hard tissues whenever the precise shape and arrangement of the subphases cannot be ignored. Our numerical results are benchmarked exploiting the semi-analytical solution which holds for cylindrical aligned fibers.     

Surface wrinkling: the phenomenon causing bees in bitumen

The so called “bee phenomenon” in bitumen has been investigated by means of AFM quantitative nanomechanical property mapping. Bees are a phenomenon that can be observed by topography measurements using AFM. The characteristic “bee” appearance comes from regions with alternating higher and lower bands in the surface topography of bitumen, which are surrounded by a flat area. The proposed mechanism for bee formation is phase separation and differential contraction during cooling from melt temperatures leading to wrinkling due to differences in the elastic modulus of the material phases. Using a laminate wrinkling model, the thickness of the bee laminate was calculated from the wavelengths and Young’s moduli of the bee laminate and the matrix. It was found to vary between 70 and 140 nm for the five bitumen samples that contained significant amounts of wax.     

Raman investigation of single oxidized carbon nanotubes

The oxidation process of single-walled carbon nanotubes via nitric acid treatment was followed by IR-, UV-Vis-NIR, and single bundle Raman spectroscopy. The introduction of functional, oxygen-containing groups is revealed by an additional absorption band at 1725 cm⁻¹, characteristic of carbonyl stretch vibrations. No significant shift of the optical absorption bands could be detected after oxidation. The combination of atomic force microscopy and confocal scanning resonance-enhanced Raman microscopy was used to investigate thin bundles and, eventually, individual nanotubes in detail. These experiments enabled determination of the dependence of the Raman intensity of the G-line (around 1590 cm⁻¹) on the bundle height for both non-oxidized and oxidized tubes. The Raman cross-section of the oxidized tubes was found to be reduced by a factor of ˜4, compared to the pristine tubes. This observation is ascribed to all tubes within a bundle that are oxidized to the same degree.     

In Memory of Our Great Friend Professor Dong Haishan

In October 1987 an international symposium on propellants, explosives and pyrotechnics was arranged in Beijing at the Beijing Institute of Technology. I participated in that symposium and presented a paper entitled "Sensitivity Test Methods for approval of Explosives in Sweden".     

Goat milk consumption protects DNA against damage induced by chronic iron overload in anaemic rats

The effect of cow or goat milk-based diets, either normal or Fe-overloaded, on DNA stability was studied in control and anaemic rats for 30 or 50 days of chronic Fe repletion. DNA damage was assessed using the alkaline comet assay. Background DNA damage in lymphocytes of peripheral blood was much lower in control and anaemic rats, given the normal or Fe-overloaded goat milk-based diet after 30 and 50 days versus cow milk-based diet. Chronic Fe-overload had no adverse effect on DNA stability in control and anaemic fed the goat milk-based diet versus the same diet with normal-Fe content at the end of the study. The quality of goat milk fat, together with the high levels of bioavailable Mg and Zn may be responsible for its protective effect on DNA of peripheral blood lymphocytes under the different experimental conditions, even during chronic Fe-overload.     

Interactions among iron, calcium, phosphorus and magnesium in the nutritionally iron-deficient rat

We studied the development of nutritional iron deficiency 0, 10, 20, 30 and 40 days after the intake of a semisynthetic diet lacking iron (diet 0) and the possible interactions with calcium, phosphorus and magnesium in both control rats and rats after 40 days of iron deficiency. During this period, iron deficiency was found to produce stress in the rats, as evidenced by high levels of cortisol in the serum. High levels of parathyroid hormone (PTH) were also found. There was a considerable increase in the absorption of calcium, phosphorus and magnesium, but the phosphorus and magnesium balance decreased and that of calcium remained practically unchanged, although there was an increase in calcium urinary elimination. Despite the noticeable degree of bone demineralization, which was evident in the femur, serum levels of calcium, phosphorus and magnesium remained constant. The present study shows that severe nutritional ferropenic anaemia provokes significant alterations in the metabolism of calcium, phosphorus and magnesium. We conclude that these alterations should be taken into account in the treatment of this pathology, given its prevalence and the fact that it may exacerbate other pathologies, particularly those related to the metabolism of calcium and phosphorus.