Erysipelothrix rhusiopathiae bacteremia after dog bite

A case of erysipeloid with bacteraemia caused by Erysipelothrix rhusiopathiae (ER) in a previously healthy 41-year old man is presented. The bacterium was probably introduced by the bite of a dog. He was treated successfully with penicillin V. The ER bacteraemia occurred without complications of endocarditis.     

Optimized scenario for rainfall forecasting using genetic algorithm coupled with artificial neural network

Rainfall forecasting plays many important role in water resources studies such as river training works and design of flood warning systems. Recent advancement in artificial intelligence and in particular techniques aimed at converting input to output for highly nonlinear, non-convex and dimensionalized processes such as rainfall field, provide an alternative approach for developing rainfall forecasting model. Artificial neural networks (ANNs), which perform a nonlinear mapping between inputs and outputs, are such a technique. Current literatures on artificial neural networks show that the selection of network architecture and its efficient training procedure are major obstacles for their daily usage. In this paper, feed-forward type networks will be developed to simulate the rainfall field and a so-called back propagation (BP) algorithm coupled with genetic algorithm (GA) will be used to train and optimize the networks. The technique will be implemented to forecast rainfall for a number of times using rainfall hyetograph of recording rain gauges in the Upper Parramatta catchment in the western suburbs of Sydney, Australia. Results of the study showed the structuring of ANN network with the input parameter selection, when coupled with GA, performed better compared to similar work of using ANN alone.     

A comparison of Zayandehrood River water values for agriculture and the environment

River water management is challenging not only since they are open systems with changing physical structures, but also because the water values are mostly unknown over varied sectors. If policymakers grasp water values, water management will be more efficient. This research intends to examine the values of water in agriculture, which receives the most substantial portion of water resources, with the values of water in the environment in Isfahan located in the Zayandehrood River basin of Iran. The consequences of contingent valuation and production function methods revealed that per cubic metre value of water is 13 times higher in the environment than agriculture. The government should reconsider the higher value of the environment despite it is a non‐market value. The contingent valuation model additionally proved that women exhibited 21% more willingness to pay than men in order to protect the environment; however, they are paid less by 36%.     

A combinatorial approach to evaluation of monomer conversion and particle size distribution in vinyl chloride emulsion polymerization

This work is targeted to study emulsion polymerization of vinyl chloride monomer (VCM) using experimental and mathematical methods. To fulfill this goal, a computer code was developed on the basis of zero–one population balance by which the effects of initiator and emulsifier concentration on the evolution of VCM conversion were investigated in the course of polymerization. The model was also trained to capture the coagulation of the particles. This enabled to adopt a reliable way of evaluating the particle size distribution (PSD). In particular, the rates of homogeneous and micellar nucleation mechanisms were simulated and reasonably predicted alterations in the PSD and the number of polymer particles under the influence of aforementioned parameters. The results from modeling were satisfactorily consistent with the experimental outputs and obviously visualized the impact of initiator and surfactant concentration on the PSD of the prepared PVC latexes.     

Pure and mixed gas permeation study of silica incorporated polyurethane-urea membrane modified by MOCA chain extender

Polyurethane-urea (PUU) nanocomposite membranes have been prepared using various loadings of silica (SiO₂) nanoparticles. A Novel PU was fabricated by a two-step bulk polymerization technique based on polycaprolactone (PCL), hexamethylene diisocyanate (HDI), and diamine chain extender, 4,4-methylenebis(2-chloroaniline) (MOCA). The FTIR spectra indicated that the extent of phase separation reduces with increasing SiO₂ content. The presence of crystal regions in the soft and hard segments was confirmed by DSC and XRD analyses. The obtained results illustrated a decrement in the gases' permeation in the presence of SiO₂ particles. By increasing the filler content up to 15 wt% and pressure of 8 bar, the gas permeation value of the CO₂, O₂, and N₂ decreased 36%, 54%, and 59%, respectively. However, the permselectivity of the CO₂/N₂ and O₂/N₂ increased considerably, 55% and 13% respectively. On the contrary, by raising the temperature, a dramatic augmentation in the permeability of all gases with a simultaneous reduction in the selectivity values of both gas pairs was revealed. Increasing the pressure led to a decrease in the permeability values of all membranes for O₂ and N₂, whereas the permeability for CO₂ increased with the pressure. Nevertheless, the selectivity values for the pair of gases increased (at a pressure of 10 bar, 1.66 and 1.17 times the neat PU for CO₂/N₂ and O₂/N₂, respectively). Furthermore, the permeability of the CO₂, O₂, and N₂ for the mixed gases was smaller than for pure ones at the same gas upstream pressure. Nonetheless, like the pure gas, the selectivity of both pair gases increased.     

SOLUTION OF POPULATION BALANCE EQUATIONS IN EMULSION POLYMERIZATION USING METHOD OF MOMENTS

In this work, the method of moments is used for solution of population balance equations appearing in modeling of emulsion polymerization (EP). The zero-one model without coagulation effect and the pseudo-bulk model including coagulation effect are investigated as two common approaches for modeling EP processes. The fixed quadrature method is used to close the set of moment equations, and the maximum entropy approach is applied to reconstruct the particle size distribution from a finite number of its moments. Comparing the results with those obtained by the high-precision finite volume technique indicates that, despite the low computational load of the moment method, it has an acceptable accuracy. These features support use of the moment technique for other applications such as on-line control or optimization in particulate processes.     

Evolution of vinyl chloride conversion below critical micelle concentration: A response surface analysis

Utilizing response surface methodology, the conversion of vinyl chloride monomer (VCM) was monitored when the polymerization temperature, the type of surfactant, and the weight ratio of water‐to‐monomer (W/M) were taken as the emulsion polymerization variables. Because the homogeneous nucleation was found to be the dominant mechanism in VCM emulsion polymerization, irrespective of the surfactant concentration, the whole experiments have been carried out below critical micelle concentration of the used surfactants. Among all the studied variables, the polymerization temperature appeared as the most effective parameter; moreover, its interactive effect with W/M caused different trends in the alteration of final conversion being observed. Also, depending on the reaction temperature, the VCM conversion would be affected by the type of the surfactant used. Contrarily, simultaneous change in the type of surfactant and W/M revealed an insignificant effect on the evolution of VCM conversion. The optimization of final conversion of VCM was also accessible through contour plots of response surface methodology. It is worth noting that, taking a conventional approach into consideration, the alteration of VCM conversion seemed to be a monotonic function of temperature. J. VINYL ADDIT. TECHNOL., 21:157–165, 2015. © 2014 Society of Plastics Engineers     

Mechanism of the reversibility of asphaltene precipitation in crude oil

Asphaltene precipitation and deposition occur in petroleum reservoirs as a change in pressure, temperature and liquid phase composition and reduce the oil recovery considerably. In addition to these, asphaltene precipitates may deposit in the pore spaces of reservoir rock and form plugging, which is referred to as a type of formation damage, i.e. permeability reduction. In all cases above, it is of great importance to know under which conditions the asphaltenes precipitate and to what extent precipitated asphaltenes can be re-dissolved. In other words, to what extent the process of asphaltene precipitation is reversible with respect to change in thermodynamic conditions. In present work, a series of experiments was designed and carried out to quantitatively distinguish the reversibility of asphaltene precipitation upon the change in pressure, temperature and liquid composition. Experiments were conducted in non-porous media. Generally it was observed that the asphaltene precipitation is a partial reversible process for oil under study upon temperature change with hysteresis. However, the precipitation of asphaltene as a function of mixture composition and pressure is nearly reversible with a little hysteresis.     

Application of thermal ultrasound-assisted liquid–liquid micro-extraction coupled with HPLC-UV for rapid determination of synthetic phenolic antioxidants in edible oils

A simple, fast, and reliable liquid–liquid micro-extraction (LLME) method assisted by thermal ultrasound approach was developed for simultaneous determination of synthetic phenolic antioxidants (SPAs) in edible oils by high-performance liquid chromatography equipped with ultraviolet detector (HPLC-UV). The synthetic antioxidants were propyl gallate (PG), butylated hydroxyanisole (BHA), tert-butylhydroquinone (TBHQ), and butylated hydroxyltoluene (BHT). The best extraction conditions were observed were methanol/acetonitrile (1:1, v/v) as the solvent, ultrasound at 4 min, and a temperature of 40°C. The linearity of the calibration curves for the optimum conditions were R² > 0.989 for all of the SPAs in a range from 1–200 μg ml⁻¹. Relative standard deviation (RSD %) for five analysis was in range of 2.83% to 4.21%. Limit of detection (LOD) and limit of quantification (LOQ) were obtained in range of 0.012–0.06 and 0.04–0.2 μg g⁻¹, respectively. With regard to recovery, a range of 91%–116% was calculated for the spiked edible oils.     

Nanocrystalline ErVO<Subscript>4</Subscript>: synthesis,characterization, optical and photocatalytic properties

Nanoparticles sphere-like erbium vanadate (ErVO₄) have been successfully synthesized via the co-precipitation method process by using erbium nitrate hexahydrate, NH₄VO₃ in water. Besides, three surfactants such as polyethylene glycol, sodium dodecyl sulfate and cetyltrimethyl ammonium bromide were used to investigate their effects on the morphology and particle size of ErVO₄ nanoparticles. According to the vibrating sample magnetometer, erbium vanadate ErVO₄ nanoparticles indicated a paramagnetic behavior at room temperature. The as-synthesized nanoparticles were characterized by X-ray diffraction, scanning electron microscopy, diffuse reflectance spectroscopy, and energy dispersive X-ray microanalysis. To evaluate the catalytic properties of nanocrystalline erbium vanadate ErVO₄ the photocatalytic degradations of methyl orange under ultraviolet light irradiation were carried out.