Graphical Methodology to Study the Corona Onset Voltage for Electrostatic Precipitation of Nanoparticles

Theoretical Foundations of Chemical Engineering - The corona onset voltage is an important operating parameter in the electrostatic precipitation of nanoparticulate, however, its experimental...     

Dielectric relaxation of vegetable-based polyurethane

Vegetable-based polyurethane (PU) was prepared in the thin film form by spin coating. This polymer is synthesised from castor oil, which can be extracted from the seeds of a native plant in Brazil called mamona. This polymer is biocompatible and is being used as material for artificial bone. The PU was characterised by dielectric spectroscopy in a wide range of frequency (10^–5 Hz to 10⁵ Hz) and by thermally stimulated discharge current (TSDC) measurements. The glass transition temperature (T _g = 39°C) was determined and using the initial rise method the activation energy was found to be 1.58 eV.     

Zirconium recovery from zircaloy shavings

A chlorination process for recovering Zr from zircaloy scrap has been studied. Zircaloy chlorination was possible at temperatures as low as 220 °C. The scale microstructure and its effect on the zircaloy reactivity was analysed using Thermogravimetric analysis (TGA), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDXS) and scanning electron microscopy (SEM) techniques. A solid-solid phase transformation took place into the oxide scale during the zircaloy chlorination. Zirconium, as ZrCl₄(g), was separated from the oxide scale and chlorides of Cr and Fe. The effect of the reaction temperature was also analysed.     

Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

Optical properties of Nd-doped Ca3(VO4)2 single crystal fiber

Optical absorption and photoluminescence of Ca₃(VO₄)₂ single crystal grown by a floating-zone technique and containing Nd³⁺ ions were investigated. High absorption coefficients and broadening of most absorption bands are present at 300 K, while substructures in some of the same bands can be evidenced at 12 K. Most features of measured spectra are characteristic of random occupation of more than a single Ca²⁺ site by the Nd³⁺ ion and of distortions provoked by different charge compensation mechanisms involving oxygen vacancies promotion in the crystal lattice. Nd³⁺ optical properties were studied by using the Judd-Ofelt theory to calculate the spectral parameters relevant for laser applications.     

A new method forin-situ measurement of electrical resistivity of reinforced concrete

A new method is described for thein-situ measurement of electrical resistivity of concrete structures. The method is based on the early work of J. Newman who calculated the electrolyte resistivity between a disk and a counter electrode located at infinity. This method has the advantage compared with Wenner's of using a single small electrode for the measurements. In this paper, results are presented comparing this method with Wenner's and with results carried out using a conductivity cell in electrolytes. Finally, values of resistivity are compared to corrosion intensity, and a threshold for active corrosion is suggested.

---

Résumé On décrit une nouvelle méthode de mesure de la résistivité électrique du béton dont la technique est basée sur un travail ancien de J. Newman qui avait calculé la résistivité entre un disque et une électrode auxiliaire placée à l'infini. Comparée à la méthode de Wenner, cette méthode présente l'avantage de n'utiliser, pour les mesures, qu'une petite électrode. Dans cet article, on présente les résultats de la comparaison établie avec la méthode de Wenner et avec les résultats obtenus avec une cellule de conductivité placée dans les électrolytes. Enfin, on compare les valeurs de la résistivité du béton avec celles de l'intensité de la corrosion et on suggère un seuil de corrosion active.

---

---

Editorial note Camen Andrade and Maria-Cruz Alonso are working at the Instituto Eduardo de Torroja which is a RILEM Titular Member. Dr. Andrade, who was the 1986 RILEM Medallist, have had all these years great responsibilities within RILEM. Chairlady of the Advisory Technical Committee until 1993, she is now a member of the Coordinating Committee. She is active in 116-PCD Technical Committee on Permeability of Concrete as a Criterion of its Durability and has been appointed chairdlady of 154-EMC Technical Committee on Electrochemical Techniques for Measuring Metallic Corrosion. Carmen Andrade has been appointed RILEM Fellow in 1995.