On regular drawn symbolic picture languages

Drawn symbolic pictures are an extension of drawn pictures obtained by associating a symbol from an alphabet to each point of the picture. In the paper we will address some new interesting issues derived from the introduction of the symbols and we will identify the conditions, which ensure the preservation of properties holding for drawn pictures in the setting of the proposed extension.     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Scientific and technological performance evaluation of the Spanish Council for Scientific Research (CSIC) in the field of Biotechnology

An evaluation of the Spanish CSIC performance in Biotechnology, as compared with those of the French CNRS and the Italian CNR, has been carried out to determine the balance between the generation of scientific knowledge and the transfer of technology. This study shows a high scientific productivity mostly in journals with moderate impact factor, a low generation of patents and an insufficient transfer of knowledge to the Spanish companies. Other indicators confirm the existence of competitive human resources in biotechnological research producing scientific knowledge of interest for the development of patents and that cooperates successfully at European level.     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

Use of zeolite-rich rocks and waste materials for the production of structural lightweight concretes

This paper aims at testing the use of mixtures constituted by natural zeolitized products and SiC-bearing industrial wastes (sludge deriving from polishing of porcelain stoneware tiles, hereafter DPM) for the production of lightweight expanded aggregates as constituents of structural and/or thermo-insulating lightweight concretes. Two commercial products have been used as zeolite natural source: Cab70 (Yellow facies of Campanian Ignimbrite) and IZclino (Turkish clinoptilolite-rich epiclastite). Different amounts of a calcareous material (Pozzano limestones — hereafter CP) from the Sorrento peninsula (Naples — Italy) were also added to a Cab70–DPM mixture. All raw materials were characterized by means of mineralogical (XRPD) and chemical (XRF) analyses. All the products and mixtures were tested from a technological point of view by means of fusibility and firing tests in order to evaluate the expanding properties. It was evidenced that the expansion of the mixture was deeply depending on the occurrence of SiC in the industrial waste. The addition of CP (10 wt.%) to the mixtures accounts for an even increased expansion, though this is accompanied by a worsening of the mechanical features of the material.These results along with literature data allowed to select 3 mixtures (70% Cab70–30% DPM, 70% IZclino–30% DPM, 60% Cab70–30% DPM–10% CP) and each of them was used for the preparation of 5 l of lightweight aggregates afterward employed for the manufacture of lightweight concretes. It was remarked that natural zeolitized materials mixed with DPM (30 wt.%) can provide lightweight aggregates with densities ranging between 0.8 and 1.0 g/cm³ suitable for the preparation of structural lightweight concretes. The addition to the mixture of CP (10 wt.%) produces less dense aggregates (0.6–0.7 g/cm³) potentially useful for the manufacture of thermo insulating lightweight concretes.     

Gamma irradiation of PolyEthyleneTerephthalate and PolyEthyleneNaphthalate

The effect of gamma irradiation in air is investigated in two thermoplastic polyesters (PET and PEN), in order to evaluate the influence of aromatic density and the role of oxygen on radiation resistance. EPR measurements were carried out to detect radical stability against oxygen permeation and to provide radical characterization. Viscometric data reveal a different behaviour between films and thick samples. Positron annihilation spectra show a decrease of ortho-positronium intensity, which is more marked in film samples. ortho-positronium lifetime does not depend on the radiation dose.     

Cpk index estimation using data transformation

Process capability indices (PCIs) are used in industry to assess percentages of nonconforming parts. An underlying assumption is that the output process measurements are distributed as normal random variables. When normal distributions are assumed, but different distributions are present - such as skew, heavy-tailed, and short-tailed distributions - the percentages of nonconforming parts are significantly different than the computed PCIs indicate. Data arising from nonnormal distributions can sometimes be transformed to conform to the normality assumption and the PCI's computed for the transformed data. In this paper, the effect of the transformation on the estimate of nonconforming parts is examined for three examples of nonnormal distributions - gamma, lognormal, and Weibull. The results of this experimental analysis suggest that data transformation can be useful for estimating an interval for C_pk values and the number of nonconforming parts.     

An infrastructure for smart hospitals

In healthcare facilities most of the daily activities require strict coordination between clinicians, who often operate under heavy workloads and minimal workforce conditions in environments filled with increasingly complex technology. Ubiquitous Computing applications constitute a suitable solution for both reducing medical costs and improving patient safety by better supporting clinical processes. In this study we introduce an intelligent infrastructure for smart hospitals which implements basic services to optimize medical staff/patient interactions and grants ubiquitous and transparent access to clinical data stored in standard clinical databases. This infrastructure relies on the integration of Radio Frequency IDentification (RFID) and photosensor technologies to identify, locate and track clinicians and patients equipped with mobile devices and wearable RFID tags.