Boron-doped activated carbon from the stems of Prosopis juliflora as an effective electrode material in symmetric supercapacitors

For a supercapacitor electrode, carbon-based materials have received great attention for their high surface area and stability. In this work, sustainable and cost-effective synthesis of boron-doped activated biomass-derived carbon from the stems of Prosopis juliflora has been reported for supercapacitor applications. The activation by KOH creates pores and boron induces p-type doping in the carbon matrix. The material gave a higher specific capacitance of 307.14 F/g at a current density of 0.5 A/g. The symmetric supercapacitor device delivered 156.29 F/g of specific capacitance with 98.1% of energy efficiency. The observed energy and power densities were 7.81 Wh/Kg and 150 W/Kg, respectively. The device was further studied with stability test for 1000 charge/discharge cycles and showed 98.6% of capacitance retention and 97.9% of coulombic efficiency.

     

A New Route for the Synthesis of Tungsten Carbide–Cobalt Nanocomposites

Synthesis of WC–Co nanocomposites generally involves gas-phase carburization. A novel approach in which a polymer precursor such as polyacrylonitrile serves as an in situ carbon source has been developed. The WC–Co nanocomposites formed are characterized by X-ray powder diffraction and electron microscopy. Nearly phase pure WC–Co nanocomposites with a particle size of 50–80 nm have been obtained. The phase purity of the products is strongly influenced by the synthesis and processing conditions such as the firing temperature, time, and atmosphere.     

Vapor-Phase Alkylation of Toluene with Isopropanol over Mg/Al, Ni/Al and Cu/Al Hydrotalcites (Layered Double Hydroxide)

Vapor-phase isopropylation of toluene has been carried out over Mg/Al, Ni/Al and Cu/Al calcined hydrotalcites (CHTs). Reaction conditions were optimized for alkylation by varying temperature, weight hourly space velocity and reactant mole ratio. Side-chain alkylation is found to be more predominant than ring alkylation over Mg/Al CHT, while Ni/Al and Cu/Al CHTs favored ring alkylation. The main products were isobutylbenzene and cymene. The combined participation of acidic and basic sites of the materials is found to be crucial for both side-chain and ring alkylation of toluene with isopropanol. An X-ray diffraction pattern of the resulting oxide indicates a diffuse MgO structure. The incorporation of small amounts of Al³⁺ to MgO generates new surface Lewis acid--base pair sites.     

Vapor-Phase Isopropylation of Phenol over Fe-Containing Al-MCM-41 Molecular Sieves

Al-MCM-41 and Fe-containing MCM-41 molecular sieves are hydrothermally synthesized. The low-angle XRD analysis shows that iron incorporation in Al-MCM-41 retains the hexagonal structure of MCM-41. The higher d-spacing values of Fe-Al-MCM-41 catalysts than those of Al-MCM-41 indicate the incorporation of iron into the framework. The mesoporous nature of the materials was confirmed by nitrogen adsorption isotherms. Electron paramagnetic resonance (EPR) and diffuse reflectance spectra (DRS) techniques confirm the tetrahedral coordination of iron into the Al-MCM-41 framework. Acidity of the synthesized catalysts was analyzed by both TPD of ammonia and pyridine-adsorbed FT-IR spectroscopy. The acidity measurements indicate that iron incorporation increases both Lewis and Brønsted acidity of the catalysts. Vapor-phase isopropylation of phenol with the new'alkylating agent isopropyl acetate was carried over the H-forms of the above catalysts. The phenol to isopropyl acetate ratio of 1?:?2 and the phenol space velocity of 1.1 h^-1 were found to be the optimum conditions for better phenol conversion and para isomer (4-isopropyl phenol) selectivity. On comparison, the Fe-incorporated Al-MCM-41 catalysts show significantly higher phenol conversion and selectivity toward the important product 4-isopropyl phenol (4-IPP) may be due to stronger Brønsted acid sites generated by the strengthening effect of nearby Lewis acid sites. Further, the undesired and dialkylated products selectivity are found to be lower over Fe-incorporated Al-MCM-41 than pure Al-MCM-41 catalysts.     

Vapour phase esterification of butyric acid with 1-pentanol over Al-MCM-41 mesoporous molecular sieves

Al-MCM-41 molecular sieves with Si/Al ratios 25, 50, 75 & 100 were synthesized hydrothermally and characterized systematically by various analytical and spectroscopy techniques. Their catalytic activity was evaluated for the vapour phase reaction of butyric acid with 1-pentanol. Pentyl butyrate was obtained as the only product. Reaction parameters such as temperature, molar ratio and feed rate were optimized for higher butyric acid conversion. The time-on-stream study was carried out at optimum conditions resulting in gradual decrease in the activity of the catalyst.     

Ultra-Thin Single-Particle-Layer Sodium Beta-Alumina-Based Composite Polymer Electrolyte Membrane for Sodium-Metal Batteries

Inorganic/organic composite polymer electrolytes (CPEs) with good flexibility and electrode contact have been pursued for solid−state sodium-metal batteries. However, the application of CPEs for high energy density solid−state sodium-metal batteries is still limited by the low Na⁺ conductivity, large thickness, and low ion transference number. Herein, an ultra-thin single-particle-layer (UTSPL) composite polymer electrolyte membrane with a thickness of ≈20 µm straddled by a sodium beta−alumina ceramic electrolyte (SBACE) is presented. A ceramic Na⁺-ion electrolyte that bridges or percolates across an ultra-thin and flexible polymer membrane provides: 1) the strength and flexibility from the polymer membrane, 2) excellent electrolyte/electrode interfacial contact, and 3) a percolation path for Na⁺-ion transfer. Owing to this novel design, the obtained UTSPL-35SBACE membrane exhibits a high Na⁺-ion conductivity of 0.19 mS cm⁻¹ and a transference number of 0.91 at room temperature, contributing to long−term cycling stability of symmetric sodium cells with a small overpotential. The assembled quasi-solid-state cell with the as−prepared UTSPL-35SBACE membrane displays superior cycling performance with a discharge capacity of 105 mAh g⁻¹ at 0.5 °C rate after 100 cycles and excellent rate performance (82 mAh g⁻¹ at 5 °C rate) at room temperature with the potassium manganese hexacyanoferrate (KMHCF)@CNTs/CNFs cathode, where KMHCF refers to potassium manganese hexacyanoferrate.     

Inkjet‐Printed Lithium–Sulfur Microcathodes for All‐Printed,Integrated Nanomanufacturing

Improved thin‐film microbatteries are needed to provide appropriate energy‐storage options to power the multitude of devices that will bring the proposed “Internet of Things” network to fruition (e.g., active radio‐frequency identification tags and microcontrollers for wearable and implantable devices). Although impressive efforts have been made to improve the energy density of 3D microbatteries, they have all used low energy‐density lithium‐ion chemistries, which present a fundamental barrier to miniaturization. In addition, they require complicated microfabrication processes that hinder cost‐competitiveness. Here, inkjet‐printed lithium–sulfur (Li–S) cathodes for integrated nanomanufacturing are reported. Single‐wall carbon nanotubes infused with electronically conductive straight‐chain sulfur (S@SWNT) are adopted as an integrated current‐collector/active‐material composite, and inkjet printing as a top‐down approach to achieve thin‐film shape control over printed electrode dimensions is used. The novel Li–S cathodes may be directly printed on traditional microelectronic semicoductor substrates (e.g., SiO₂) or on flexible aluminum foil. Profilometry indicates that these microelectrodes are less than 10 µm thick, while cyclic voltammetry analyses show that the S@SWNT possesses pseudocapacitive characteristics and corroborates a previous study suggesting the S@SWNT discharge via a purely solid‐state mechanism. The printed electrodes produce ≈800 mAh g^?1 S initially and ≈700 mAh g^?1 after 100 charge/discharge cycles at C/2 rate.     

Rechargeable Aluminum‐Ion Batteries Based on an Open‐Tunnel Framework

Rechargeable batteries based on an abundant metal such as aluminum with a three‐electron transfer per atom are promising for large‐scale electrochemical energy storage. Aluminum can be handled in air, thus offering superior safety, easy fabrication, and low cost. However, the development of Al‐ion batteries has been challenging due to the difficulties in identifying suitable cathode materials. This study presents the use of a highly open framework Mo_{2.5 + y} VO_{9 + z} as a cathode for Al‐ion batteries. The open‐tunnel oxide allows a facile diffusion of the guest species and provides sufficient redox centers to help redistribute the charge within the local host lattice during the multivalent‐ion insertion, thus leading to good rate capability with a specific capacity among the highest reported in the literature for Al‐based batteries. This study also presents the use of Mo_{2.5 + y} VO_{9 + z} as a model host to develop a novel ultrafast technique for chemical insertion of Al ions into host structures. The microwave‐assisted method employing diethylene glycol and aluminum diacetate (Al(OH)(C₂H₃O₂)₂) can be performed in air in as little as 30 min, which is far superior to the traditional chemical insertion techniques involving moisture‐sensitive organometallic reagents. The Al‐inserted Al _x Mo_{2.5 + y} VO_{9 + z} obtained by the microwave‐assisted chemical insertion can be used in Al‐based rechargeable batteries.     

Cobalt Phosphide Coupled with Heteroatom‐Doped Nanocarbon Hybrid Electroctalysts for Efficient,Long‐Life Rechargeable Zinc–Air Batteries

Metal phosphides and heteroatom‐doped carbons have been regarded as promising candidates as bifunctional catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, both have suffered from stability issues during repeated ORR and OER operations in zinc–air batteries (ZABs). Herein, this study reports a versatile cobalt‐based hybrid catalyst with a 1D structure by integrating the metal‐organic framework‐derived conversion approach and an in situ crosslinking method. Among them, the 1D hybrid catalyst composed of ultrasmall cobalt phosphide nanoparticles supported by nitrogen‐, sulfur‐, phosphorus‐doped carbon matrix shows remarkable bifunctional activity close to that of the benchmark precious‐metal catalysts along with an excellent durability in the full potential range covering both the OER and ORR. The overall overpotential of the rechargeable ZABs can be greatly reduced with this bifunctional hybrid catalyst as an air‐electrode, and the cycling stability outperforms the commercial Pt/C catalyst. It is revealed that the cobalt phosphide nanoparticles are in situ converted to cobalt oxide under the accelerated conditions during OER (and/or ORR) of the ZABs and reduces the anodic current applied to the carbon. This contributes to the stability of the carbon material and in maintaining the high initial catalytic properties of the hybrid catalyst.