Thermal conversion (visbreaking) of heavy Iraqi residue

A heavy Iraqi residue was thermally cracked using a soaker visbreaking process at temperatures between 435 and 480 °C, with a range of residence times of 43–109 s in the coil and 151–379 s in the soaker. The pressure was kept constant at 7 bar. Visbroken products were characterized, evaluated and fractionated into light, middle and heavy cuts. The stability of the visbroken products was compared with that of the original feedstock. Also an activation energy was calculated for the visbreaking process and related to the severity of the process. The results obtained show that the conditions used were not severe and could be applied to obtain a required conversion depending on the uses of the products.     

An integrated approach to concept evaluation in a new product development

A new product development (NPD) process can be thought as a comprehensive process in which the design is progressively detailed through a series of phases. At the end of each phase a design review is held to approve the design and release or not it to the next level. As one of these phases, concept selection aiming to select the most appropriate concept for further development, is conducted earlier in the process. As the further development progresses on a selected concept, it becomes more difficult to make design changes in terms of cost and schedule dimensions, and therefore, selecting the best concept among a set of available alternatives has been an important issue for companies. On the other hand, in the presence of many alternatives and selection criteria, the selection problem becomes a multiple-criteria decision making concept selection problem. To solve this problem, in this work, an integrated approach bringing two popular methods together: the modified technique for order preference by similarity to ideal solution (TOPSIS) and the analytical network process (ANP). The ANP method is used to determine the relative weights of a set of quantitative and qualitative evaluation criteria, as the modified TOPSIS method utilized to rank competing concept alternatives. In addition, a real example is presented to demonstrate the effectiveness and applicability of the proposed approach for potential practitioners and readers.     

城市局地-建筑耦合气候评价模型的开发应用

利用数值计算方法研究建筑内部气候与城市局地气候之间的能量及物质传递关系,寻找热舒适与节能和环保之间的平衡点具有重要的意义.介绍了改进后生成的城市局地-建筑耦合气候评价模型的主要内容和计算方法,以上海地区为例,计算了一个理想化的高层办公楼区的局地气候参数,空调系统排热及室内外新标准有效温度TS*E等.结果表明,空调时间段内室外平均TS*E值受空调设定温度的强烈影响.当空调设定温度从28℃降至22℃时,空调排热平均值增加了193 W/m2,这个增值造成室外平均TS*E提高了约0.23℃.     

Growth of AgGaTe2 and AgAlTe2 Layers for Novel Photovoltaic Materials

AgGaTe₂ and AgAlTe₂ layers were grown on a-plane sapphire substrates by closed-space sublimation. These compounds replace Cd in CdTe with group I and III elements, and are, hence, expected to be ideal novel candidate materials for solar cells. The grown layers were confirmed to be stoichiometric AgGaTe₂ and AgAlTe₂ by x-ray diffraction (XRD). The AgAlTe₂ layers had strong preference for the (112) orientation. The XRD spectrum of the AgGaTe₂ layer was different from that of the AgAlTe₂ layer, and strong peaks were observed for (103) and (110) diffraction. The variation in orientations of the grown layers was analyzed in detail by use of XRD pole figures, which revealed that the AgGaTe₂ layers had an epitaxial relationship with the a-plane sapphire substrates.     

Low‐cost dye‐sensitized solar cells with ball‐milled tellurium‐doped graphene as counter electrodes and a natural sensitizer dye

This paper presents a facile and economic development of dye‐sensitized solar cells using a nonprecious counter electrode made from ball‐milled tellurium‐doped graphene (Te‐Gr) and a natural sensitizer extracted from Calotropis gigantea leaves. The prepared materials were characterized using various techniques, such as Raman spectroscopy, X‐ray diffraction (XRD), atomic force microscopy (AFM), impedance spectroscopy, and scanning electron microscopy with built‐in energy‐dispersive X‐ray spectroscopy (SEM with EDS). The electrochemical activity of the produced counter electrodes and the impedance of the fabricated cells were examined and discussed to devise plans for future enhancement of cell performance. A clear pattern of improvement was found when using cost‐effective Te‐Gr relative to the costly platinum counter electrodes, especially when compared with cells employing another natural sensitizer. The results show approximately 51% enhancement over chlorophyll‐based cells made from spinach, where the added advantage in our approach is the utilization of an abundant plant extract with little nutritional appeal.     

Effects of Mn and Gd Co-substituted into ZnO on Structural and Magnetic Properties

We have worked on the structural and magnetic properties of Zn_0.99?xMn_0.01Gd _x O _δ (for x = 0.02, 0.03, and 0.04) compounds prepared by using a sol–gel method. The x-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy were used to understand the structural properties of the samples. We observed that co-substitution of Mn (1 %) and Gd (2–4 %) into the ZnO does not change the hexagonal structure. Scanning electron microscope (SEM) images show us that the grain size decreases with the increasing amount of the Gd into the ZnO matrix. The magnetic properties of the samples have been investigated by using magnetic hysteresis and DC susceptibility measurements. The ZMG1 sample shows a weak ferromagnetic behavior at room temperature, whereas the ZMG2 and ZMG3 samples exhibit a paramagnetic nature. Furthermore, it is also found that the magnetizations of the samples decrease with increasing Gd content in the ZnMnO system due to the enhancing interaction between Gd ³⁺ ions. We summarize that the co-substitution of Mn and Gd into the ZnO generates a room-temperature ferromagnetism, but it still needs more work to obtain strong and high coercivity magnetic loops for applications.