Photon and vibration synergism on planar defects induced 2D-graphitic carbon nitride for ultrafast remediation of dyes and antibiotic ampicillin

Journal of Materials Science - Hybrid oxidation methodologies (HOMs) and active site enrichment of 2D nanocatalyst through defects induction are ubiquitously used for generating adequate reactive...     

Sintering studies of nano-crystalline zinc oxide

Sintering and grain growth of nano-crystalline undoped ZnO has been studied in detail over a wide range of temperature and holding time. Below 800 °C, sintering of over 70% theoretical density is not observed, irrespective of particle size. At 900 °C for 6 h, the nano-crystalline sample sinters to 99% of theoretical density whereas the density for as received sample is 93% of theoretical density. However, at 1300 °C or higher, the densification is found to be much faster and after a few hours becomes independent of holding time. Grain growth studies reveal a similar feature of attaining saturation over holding time. The average saturated grain size is found to be ∼1.5 and ∼2.2 μm at 800 and 900 °C, respectively, while at 1300 °C or higher, it is in between 12 and 13 μm.     

High‐Tg Carbazole Derivatives as Blue‐Emitting Hole‐Transporting Materials for Electroluminescent Devices

A series of dicarbazolyl derivatives bridged by various aromatic spacers and decorated with peripheral diarylamines were synthesized using Ullmann and Pd‐catalyzed C–N coupling procedures. These derivatives emit blue light in solution. In general, they possess high glass‐transition temperatures (T_g > 125 °C) which vary with the bridging segment and methyl substitution on the peripheral amine. Double‐layer organic light‐emitting devices were successfully fabricated using these molecules as hole‐transporting and emitting materials. Devices of the configuration ITO/HTL/TPBI/Mg:Ag (ITO: indium tin oxide; HTL: hole‐transporting layer; TPBI: 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene) display blue emission from the HTL layer. The EL spectra of these devices appear slightly distorted due to the exciplex formation at the interfaces. However, for the devices of the configuration ITO/HTL/Alq₃/Mg:Ag (Alq₃ = tris(8‐hydroxyquinoline)aluminum) a bright green light from the Alq₃ layer was observed. This clearly demonstrates the facile hole‐transporting property of the materials described here.     

Image estimation using fast modified reduced update Kalman filter

The authors have proposed some modifications of the reduced update Kalman filter (RUKF) as applied to filtering of images corrupted by additive noise. They have reduced the computational complexity by reducing the state dimensionality. By doing so, it is shown that the computational requirement is reduced by an order of magnitude while the loss of performance is only marginal. Next, the RUKF is modified using the score function based approach to accommodate non-Gaussian noise. The image is modeled as a nonstationary mean and stationary variance autoregressive Gaussian process. It is shown that the stationary variance assumption is reasonable if the nonstationary mean is computed by an edge and detail preserving efficient estimator of local nonstationary mean. Such an estimator, called the hybrid multistage medium D (HMSMD) filter, is also described. Detailed experimental results are provided which indicate the success of the new filtering scheme     

III–V super-lattice SPST/SPMT pin switches for THz communication: theoretical reliability and experimental feasibility studies

Microsystem Technologies - A physics-based Quantum-Modified CLassical Drift–Diffusion (QMCLDD) non-linear mathematical model has been developed for design and characterisation of GaN/AlGaN...     

Design and characterization of asymetrical super-lattice Si/4H-SiC pin photo diode array: a potential opto-sensor for future applications in bio-medical domain

Microsystem Technologies - Photo-sensors are integral part of different bio-medical diagnostic equipment. Each type of bio-molecules possess unique spectral fingerprint in visible wavelength region...     

Biobased thermosets from the free‐radical copolymerization of conjugated linseed oil

New polymeric thermosets were prepared through the bulk free‐radical copolymerization of 100% conjugated linseed oil, acrylonitrile, and divinylbenzene. Under the appropriate reaction conditions and with the appropriate curing sequence, 61–96 wt % of the oil was incorporated into the crosslinked thermosets. The resulting yellow, transparent thermosets varied from being soft and flexible to being hard and brittle. Dynamic mechanical analysis and thermogravimetric analysis showed that these thermosets had good mechanical properties and thermal stability. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 979–985, 2007