Nitrogen contributions of alley cropped Trifolium pratense may sustain short rotation woody crop yields on marginal lands

Nutrient Cycling in Agroecosystems - Incorporating nitrogen-fixing cover crops into short rotation woody crop (SWRC) plantations may increase soil and tree nitrogen while sustaining, or even...     

Dielectric behavior of Cu–GeO<Subscript>2</Subscript> cermet thin films

Capacitance and dielectric loss measurements were carried out using an Al/Cu–GeO₂/Al sandwich structure for 0 to 10 vol% Cu films, 120–400 nm thick, deposited at 0.4–1.5 nm/s in the frequency and temperature range 1–10⁶ Hz and 90–573 K, respectively. The variation of capacitance and dielectric loss with frequency and temperature follows the Goswami and Goswami model. Capacitance decreases slowly with increasing thickness and also varies with the change in deposition rate of the cermet film.     

Lifting-based wavelet domain adaptive Wiener filter for image enhancement

A method of applying lifting-based wavelet domain Wiener filter (LBWDMF) in image enhancement is proposed. Lifting schemes have emerged as a powerful method for implementing biorthogonal wavelet filters. They exploit the similarity of the filter coefficients between the low-pass and high-pass filters to provide a higher speed of execution, compared to classical wavelet transforms. LBWDMF not only helps in reducing the number of computations but also achieves lossy to lossless performance with finite precision. The proposed method utilises the multi-scale characteristics of the wavelet transform and the local statistics of each subband. The proposed method transforms an image into the wavelet domain using lifting-based wavelet filters and then applies a Wiener filter in the wavelet domain and finally transforms the result into the spatial domain. When the peak signal-to-noise ratio (PSNR) is low, transforming an image to the lifting-based wavelet domain and applying the Wiener filter in the wavelet domain produces better results than directly applying Wiener filter in spatial domain. In other words each subband is processed independently in the wavelet domain by a Wiener filter. Moreover, in order to validate the effectiveness of the proposed method the result obtained using the proposed method is compared to those using the spatial domain Wiener filter (SDWF) and classical wavelet domain Wiener filter (CWDWF). Experimental results show that the proposed method has better performance over SDWF and CWDWF both visually and in terms of PSNR.     

Regional chemotherapy of liver tumors

In the absence of adequate autogenous vein for tibial artery bypass in limb salvage surgery, the use of prosthetic grafts with a distal anastomotic vein cuff or patch has shown promising results. Here, we describe how the Florester Internal Vessel Occluder (Meadox UK, Bedfordshire, UK) can facilitate the construction of a distal anastomotic vein cuff.     

Full scale thermal testing of latent heat storage in wallboard

Full scale thermal storage tests were conducted in a room lined with PCM wallboard having latent heat storage capacity. The results were compared with those obtained from tests conducted in a similar room lined with ordinary wallboard. The research showed that PCM wallboard can function efficiently as a thermal storage medium which can be applied to peak load shifting, improved use of waste and solar heat as well as more efficient operation of heating and cooling equipment.     

Multi-objective GA with fuzzy decision making for security enhancement in power system

Power system security enhancement is a major concern in the operation of power system. In this paper, the task of security enhancement is formulated as a multi-objective optimization problem with minimization of fuel cost and minimization of FACTS device investment cost as objectives. Generator active power, generator bus voltage magnitude and the reactance of Thyristor Controlled Series Capacitors (TCSC) are taken as the decision variables. The probable locations of TCSC are pre-selected based on the values of Line Overload Sensitivity Index (LOSI) calculated for each branch in the system. Multi-objective genetic algorithm (MOGA) is applied to solve this security optimization problem. In the proposed GA, the decision variables are represented as floating point numbers in the GA population. The MOGA emphasize non-dominated solutions and simultaneously maintains diversity in the non-dominated solutions. A fuzzy set theory-based approach is employed to obtain the best compromise solution over the trade-off curve. The proposed approach has been evaluated on the IEEE 30-bus and IEEE 118-bus test systems. Simulation results show the effectiveness of the proposed approach for solving the multi-objective security enhancement problem.     

The Role of Rigid Residues in Modulating TEM-1 β-Lactamase Function and Thermostability

The relationship between protein motions (i.e., dynamics) and enzymatic function has begun to be explored in β-lactamases as a way to advance our understanding of these proteins. In a recent study, we analyzed the dynamic profiles of TEM-1 (a ubiquitous class A β-lactamase) and several ancestrally reconstructed homologues. A chief finding of this work was that rigid residues that were allosterically coupled to the active site appeared to have profound effects on enzyme function, even when separated from the active site by many angstroms. In the present work, our aim was to further explore the implications of protein dynamics on β-lactamase function by altering the dynamic profile of TEM-1 using computational protein design methods. The Rosetta software suite was used to mutate amino acids surrounding either rigid residues that are highly coupled to the active site or to flexible residues with no apparent communication with the active site. Experimental characterization of ten designed proteins indicated that alteration of residues surrounding rigid, highly coupled residues, substantially affected both enzymatic activity and stability; in contrast, native-like activities and stabilities were maintained when flexible, uncoupled residues, were targeted. Our results provide additional insight into the structure-function relationship present in the TEM family of β-lactamases. Furthermore, the integration of computational protein design methods with analyses of protein dynamics represents a general approach that could be used to extend our understanding of the relationship between dynamics and function in other enzyme classes.     

Contributions to characterization of poly(vinyl chloride)–lignin blends

The present study evaluates the impact of blending organosolv and kraft lignins, which are natural polymer by‐products in the pulp and paper industry, with plasticized poly(vinyl chloride) (PVC) in flooring formulations. Also examined is the impact of replacing dioctyl phthalate, a PVC industry general‐purpose plasticizer, with diethylene glycol dibenzoate (Benzoflex 2‐45), tricresyl phosphate (Lindol), or alkyl sulfonic phenyl ester (Mesamoll) in these formulations. The influence of the different types of lignins and plasticizers on the processibility, thermal, and mechanical properties of the blends is discussed. These properties demonstrate that partial replacement of PVC (20 parts) with different lignins is feasible for some formulations that can be successfully used as matrices for a high level of calcium carbonate filler in flooring products. In addition, the data demonstrate that the presence of certain plasticizers, which interfere with the intramolecular interactions existing in lignins, may allow the lignin molecules to have more molecular mobility. The morphology and the properties of PVC plasticized lignin blends are strongly influenced by the degree and mode of the lignin plasticization and its dispersion within the PVC matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2732–2748, 2006