Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.     

Complexes With Biologically Active Ligands. Part 6 Ni(II) Coordination Compounds of Hydrazine and Heterocyclic Sulfonamides as Inhibitors of the Zinc Enzyme Carbonic Anhydrase

Ternary Ni(II) complexes of hydrazine and eight heterocyclic sulfonamides possessing carbonic anhydrase (CA) inhibitory properties, were prepared and characterized by elemental analysis, spectroscopic, magnetic, thermogravimetric, and conductimetric measurements. The complexes behave as strong inhibitors for two isozymes (I and II) of carbonic anhydrase.     

Fuzzy dynamic analysis of single degree of freedom nonlinear systems

The paper describes a method for estimating the degree of confidence (d. o. c.) of the nonlinear dynamic response. The structural parameters, the dynamic load and the structural response are modelled by fuzzy variables. Their degree of confidence is represented by the membership functions. The structure response, including its degree of confidence, is computed by fuzzy operations taking into account the degree of confidence of the parameters and dynamic load. The influence of the mass, damping coefficient, stiffness and dynamic load upon the response degree of confidence is analysed by the parameters variation. A C++ functions library was developed for fuzzy operations. The fuzzy variables are defined as objects belonging to the class FUZZY. The arithmetical and relational operators are overloaded for fuzzy operations. Conclusions are derived concerning the method for estimating the degree of confidence of the structural response. A method for the quality control of the computed response is proposed.     

Synthesis of poly(urethane-urea) varnish bearing azobenzene chromophoric pendants

A new diol with azoaromatic pendant was prepared by N-phenyl-4-amido-3,4-dichloromaleimide with 2-mercaptoethanol in the presence of NaOH, and used to obtain photosensible poly(urethane-urea) varnish. A poly(urethane-urea) varnish bearing azobenzene chromophores, based on a poly(ethylene adipate)diol (average molecular weight—2000), 4,4′-dibenzyldiisocyanate, diethylene glycol, trimethylolpropane, and afore-mentioned diol, were prepared and characterized. The polymers were characterized by FTIR spectroscopy, thermal analysis (DMA, DSC, and TGA), and the photochromic behavior by UV irradiation of thin films was discussed.     

Comprehension and acceptability of on-board traffic information: Beliefs and driving behaviour

Co-Drive on-board traffic information system is a complementary tool providing a dynamic management of transportation infrastructure and traffic as well as the diffusion of accurate real-time information about the road environment and motorists’ driving behaviour. The aim of this study was to examine drivers’ acceptability of Co-Drive by investigating the impact of traffic information provided via on-board display devices on motorists’ beliefs and behaviour.     

Transient Pressure and Temperature Field Measurements in a Lightly Loaded Circumferential Groove Journal Bearing from Startup to Steady-State Thermal Stabilization

The fluid film pressure and temperature fields have been measured simultaneously under laboratory conditions at one land of a circumferential groove journal bearing (CGJB), together with friction torque and oil flow rate, during a time span from stand-still startup to the development of a thermally stabilized steady operating regime.A very fine measurement grid—that is, 216 pressure and 180 temperature points spread across the axial and circumferential directions—has been obtained by joining and synchronizing measurements from separate test runs while rigorously re-creating the test conditions.The study confirmed that the pressure field is established faster than the temperature field, that film rupture occurs both from cavitation nuclei downstream the minimum film thickness and through air ingestion from the environment. Furthermore, the high pressures in the convergent zone stabilize relatively quickly, whereas the low pressures in the divergent zone cavitated region require a longer time to stabilize. The cavitated region reverse flow appearance has been identified thermally through upstream-oriented isotherms. This study is the first to present the transient evolutions of pressure and temperature fields.     

Structure–property relationship of sodium deoxycholate based poly(ester ether)urethane ionomers for biomedical applications

New sodium deoxycholate based poly(ester ether)urethane ionomers were prepared for the development of biomedical materials. A structure–property relationship in the tested biomaterials was established by cross‐examination of the dynamic mechanical and dielectric properties, attenuated total reflection–Fourier transform infrared investigation, thermogravimetric analysis, and surface morphology characterization. A stronger ionic interaction and solvation capacity of the ions and a higher ionic conductivity were manifested in the case of poly(ethylene oxide)‐rich segments than for poly(propylene oxide)‐rich segments in these polyurethane ionomers. The molecular and ionic interactions of the bile‐salt moiety with different polyether cosoft segments influenced chain packing and conformation, supramolecular organization, and the resulting surface morphological microstructures of the polyurethane biomembranes. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42921.     

Microwave-Assisted Synthesis of Phenothiazine and Quinoline Derivatives

Application of a dynamic microwave power system in the chemical synthesis of some phenothiazine and quinoline derivatives is described. Heterocyclic ring formation, aromatic nucleophilic substitution and heterocyclic aldehydes/ketones condensation reactions were performed on solid support, or under solvent free reaction conditions. The microwave-assisted Duff formylation of phenothiazine was achieved. Comparison of microwave-assisted synthesis with the conventional synthetic methods demonstrates advantages related to shorter reaction times and in some cases better reaction yields.