Surface structure of silver thin films on In2O3:Sn and Al2O 3 †

Surface structure of thin silver films (200 Å) on two technologically important films, indium tin oxide (ITO) and aluminium oxide, has been studied using scanning tunneling microscope. ITO films were prepared by reactive electron beam evaporation. Aluminium oxide films were prepared by oxidizing 2000 Å thick aluminium films evaporated on to H₂ terminated single crystal silicon substrates. The surface structure of silver on ITO and aluminium oxide appeared to be same and was characteristic of Stranski-Krastanov type. The observed asymmetry in the island shape was attributed to the anisotropic nature of the strain fields surrounding the nucleation centres.     

IEVCA: An efficient image encryption technique for IoT applications using 2-D Von-Neumann cellular automata

Multimedia Tools and Applications - Present era is marked by exponential growth in transfer of multimedia data through internet. Most of the Internet-of-Things(IoT) applications send images to...     

Recent advances in CKD and ESRD: A literature update

The past year has seen interesting publications in the fields of chronic kidney disease and end stage renal disease. This review highlights some of these important papers and places their findings in the context of clinical care.     

Studies on microbridges of superconducting YBCO thin film

Critical current densities of the superconducting Y-Ba-Cu-O (YBCO) films have been observed to decrease with the increase of power of microwave radiation. Presence of Josephson type of junctions in the microbridges has been established from the microwave irradiation and magnetic field studies. BCS energy gap parameter (2/kT _c ) has been calculated from thedI/dV characteristics and found to be 3.7 at 13 K.     

An improved transport layer protocol for wireless sensor networks

Wireless sensor networks (WSNs) are a kind of communication networks having independent sensor nodes that form multi-hop ad hoc network to transfer data. In the past few years, various transport control protocols in wireless sensor networks (WSNs) have been developed and proposed in the literature. In this paper, we have analyzed pump slowly, fetch quickly (PSFQ) protocol and presented an improved transport layer protocol for wireless sensor networks. The improved protocol has been analyzed based on various factors such as average latency and average error tolerance and it is found that the proposed protocol is better than PSFQ in terms of these factors.     

Perfectly matched layers for transient elastodynamics of unbounded domains

One approach to the numerical solution of a wave equation on an unbounded domain uses a bounded domain surrounded by an absorbing boundary or layer that absorbs waves propagating outward from the bounded domain. A perfectly matched layer (PML) is an unphysical absorbing layer model for linear wave equations that absorbs, almost perfectly, outgoing waves of all non‐tangential angles‐of‐incidence and of all non‐zero frequencies. In a recent work [Computer Methods in Applied Mechanics and Engineering 2003; 192: 1337–1375], the authors presented, inter alia, time‐harmonic governing equations of PMLs for anti‐plane and for plane‐strain motion of (visco‐) elastic media. This paper presents (a) corresponding time‐domain, displacement‐based governing equations of these PMLs and (b) displacement‐based finite element implementations of these equations, suitable for direct transient analysis. The finite element implementation of the anti‐plane PML is found to be symmetric, whereas that of the plane‐strain PML is not. Numerical results are presented for the anti‐plane motion of a semi‐infinite layer on a rigid base, and for the classical soil–structure interaction problems of a rigid strip‐footing on (i) a half‐plane, (ii) a layer on a half‐plane, and (iii) a layer on a rigid base. These results demonstrate the high accuracy achievable by PML models even with small bounded domains. Copyright © 2004 John Wiley & Sons, Ltd.     

Renewable hydrogen generation by steam reforming of glycerol over zirconia promoted ceria supported catalyst

The study focuses on hydrogen production from steam reforming of glycerol over nickel based catalyst promoted by zirconia and supported over ceria. Catalyst was prepared by the wet-impregnation method and characterized by BET surface area analysis, X-ray diffraction technique and scanning electron microscopy (SEM) analysis. The performance of the catalyst was evaluated in terms of hydrogen yield, selectivity and glycerol conversion at 700 °C in a tubular fixed bed reactor. The effect of glycerol concentration in feed, space time (W/F_AO), temperature and time on stream (TOS) was analyzed for the catalyst Ni–ZrO₂/CeO₂ which showed the complete conversion of glycerol and high H₂ yield that corresponds to 3.95 mol of H₂ out of 7 mol. Thermodynamic analysis was also carried out using Aspen HYSYS for system having glycerol concentration 10 wt% and 20 wt% and experimental results were compared with thermodynamics. Kinetic study was carried out for the steam reforming of glycerol over Ni–ZrO₂/CeO₂ catalyst using the power law model. The values of activation energy and order of reaction were found to be 43.4 kJ/mol and 0.3 respectively.     

Development and evaluation of orally disintegrating tablets of cilostazol-β-cyclodextrin inclusion complexes

Context: The clinical applications of cilostazol (CLZ) are limited by its low aqueous solubility (<5?µg/ml) and high biovariability.

Objective: The aim of this study was to enhance the solubility of CLZ by forming inclusion complexes (ICs) with beta cyclodextrin (β-CD) and formulating them into oral disintegrating tablets.

Methods: Phase solubility study of CLZ with β-CD was performed in water. Job’s plot was constructed to determine the stoichiometry of ICs. ICs, prepared by spray-drying technique, were characterized using Fourier transform infrared spectroscopy, differential scanning calorimetry, hot stage microscopy, powder X-ray diffraction and nuclear magnetic resonance. Molecular modeling studies were performed to understand the mode of interaction of CLZ with β-CD. The formulation process was undertaken using a reproducible design of experiment generated model, attained by variation of diluents and disintegrants at three levels. Tablets were evaluated for drug content, hardness, friability, disintegration time (DT), wetting time (WT) and dissolution profiles.

Results and discussion: Phase solubility studies suggested an A_L type curve with stability constant (K_s) of 922.52?M^?1. Job’s plot revealed 1:2 stoichiometry. All analytical techniques confirmed inclusion complexation. Molecular modeling revealed dispersive van der Waals interaction energy as a major contributor for stabilization of complex. The spray-dried complexes showed higher solubility and faster dissolution compared to plain CLZ. The optimized formulation showed DT of 11.1?±?0.8?s, WT of 8.7?±?0.9?s and almost complete dissolution of CLZ in 15?min.

Conclusion: The prepared tablets with low DT and fast dissolution will prove to be a promising drug delivery system with improved bioavailability and better patient compliance.     

Sodium effects on mechanical performance and consideration in high temperature structural design for advanced reactors

Sodium environmental effects are key limiting factors in the high temperature structural design of advanced sodium-cooled reactors. A guideline is needed to incorporate environmental effects in the ASME design rules to improve the performance reliability over long operating times. This paper summarizes the influence of sodium exposure on mechanical performance of selected austenitic stainless and ferritic/martensitic steels. Focus is on Type 316SS and mod.9Cr-1Mo. The sodium effects were evaluated by comparing the mechanical properties data in air and sodium. Carburization and decarburization were found to be the key factors that determine the tensile and creep properties of the steels. A beneficial effect of sodium exposure on fatigue life was observed under fully reversed cyclic loading in both austenitic stainless steels and ferritic/martensitic steels. However, when hold time was applied during cyclic loading, the fatigue life was significantly reduced. Based on the mechanical performance of the steels in sodium, consideration of sodium effects in high temperature structural design of advanced fast reactors is discussed.