Influence of pH on the DSSC Performance of Template Assisted SnO2 Nanostructures

Journal of Inorganic and Organometallic Polymers and Materials - This paper reports the performance of alizarin based SnO2 dye-sensitized solar cells. A novel template assisted method has been...     

Yield optimization for complex reactor systems

For complex reactions, the choice of reactor type is important for attaining optimum product yields. Strategies for specifying reactor types have beenIn this paper, product yield in a Van de Vusse reaction scheme has been studied for a wide range of the rate constants, in a reactor system consisting     

Cross‐polarization reduction of microstrip antenna using microwave absorbers

In this article, a metamaterial inspired microwave absorber is used to reduce the cross‐polarization (XP) level of the radiated wave in microstrip antenna (MSA). A microwave absorber unit‐cell has been analyzed and implemented to reduce the cross polarization (XP) level in a single element and a 2 × 2 microstrip patch array antennas. The antennas have been designed on a FR‐4 substrate of thickness 0.8 mm at 10.1 GHz center frequency. The 2 × 2 patch array antenna with and without the absorbers have been experimentally verified for the S11 parameter, the radiation pattern, and the XP suppression in H‐plane and a good comparison has been found.     

Optimization of inoculum to substrate ratio for bio-energy generation in co-digestion of tannery solid wastes

The inoculum to substrate (I/S) ratio is an important factor which influences the anaerobic digestion process. In this study, the effect of different I/S ratios on the performance of co-digestion of fleshings along with mixture of sludge generated during treatment of tannery wastewater was investigated. The parameters studied were biogas generation, volatile solids reduction, volatile fatty acid (VFA) production, and the stability of the digestion process based on VFA to alkalinity ratio was evaluated for various I/S ratios. Economical significance of I/S ratio as related to the volume of the anaerobic digester and the potential benefit of bio-energy generated are discussed in detail.     

Effect of ozonation and ultrasonication pretreatment processes on co-digestion of tannery solid wastes

Studies were carried out by the application of ozonation and ultrasonication as pretreatment processes on primary and secondary sludge generated during treatment of tannery wastewater to enhance the soluble chemical oxygen demand (SCOD). Further, co-digestion (simultaneous digestion of two or more substrates) studies were carried out in batch reactors using the fleshings (a solid waste generated during the processing of raw hides or skins into finished leather) along with the primary and the secondary sludge wherein biogas generation was compared with and without pre-treated sludge using ozone and ultrasonication processes, respectively. It was found that, application of pretreatment processes enhanced biogas generation by 45% in the case of ozone pre-treated sludge and 53% by ultrasonication processes, respectively, in conjunction with the fleshings. However, considering the optimum contact time required, application of ultrasonication as a pretreatment process was found to be the most appropriate and viable process to enhance the SCOD. This pretreatment process has the potential for implementation in tanneries using the shortest possible ultrasonication time to minimize energy cost when compared with ozonation time.     

Ant colony optimisation of spatial steel structures under static and earthquake loading

Optimisation is the process of trying to find out the best possible solution to any problem satisfying constraints. Soft computing is the class of methods which have been inspired by the biological computational methods and nature's problem-solving strategies. Currently, these methods include neural networks, evolutionary computational models such as genetic algorithms, random cost and linguistic models such as fuzzy logic. Ant colony optimisation (ACO) is one such method applied for large engineering combinatorial optimisation problems. A design procedure utilising an ACO technique is developed for discrete optimisation of reticulated steel space trusses. The ACO algorithm is motivated by the analogy with natural phenomena, in particular the ability of a colony of ants to ‘optimise’ their collective endeavours. In this paper, the computational implementation of ACO is presented in a structural design context. The objective function considered is the total weight/cost of the structure subjected to material and performance constraints in the form of stress and deflection limits. In the case of reticulated space trusses, the design variables are the cross-sectional areas of members belonging to various groups. The objective function and constraints are obtained by using structural analysis package FEAST (Anonymous, 1995. FEAST user manual. Trivandrum, India: SEG, SDS Group, ISRO, VSSC) in case of structures subjected to static loading and SAP90 (Anonymous, 1990. SAP90, ETABS, SAFE – computer software for structural and earthquake engineering. Berkeley, CA: Computers and Structures) for earthquake loading for reticulated steel space trusses. The numerical examples presented demonstrate the computational advantage of the ACO for large-scale optimisation problems.     

Poly(ethyleneterephthalate) glycolysates as effective toughening agents for epoxy resin

The potential of poly(ethyleneterephthalate) glycolysates toward improving the energy absorption characteristics of cycloaliphatic epoxy resins has been explored. Microwave‐assisted glycolytic depolymerization of PET was performed in the presence of polyether diols of different molecular weights. The obtained glycolysates were blended with epoxy, and their mechanical properties were studied under both quasi‐static and dynamic conditions. Significant improvements were observed, which were found to depend both on the amount as well as nature of glycolysate. Amine functionalities were introduced at the terminal positions of glycolysates to improve the compatibility between the two phases. The amine derivatives exhibited superior performance and the Mode I fracture toughness (K_IC) of epoxy increased by ～18% in optimized compositions, which is indicative of its improved notch sensitivity. Neat epoxy specimens fractured in a brittle fashion, but all the blends exhibited ductile failure, as evidenced by surface morphological investigations. The mechanical properties of epoxy blends prepared with analogous aliphatic polyols, both before and after amine functionalization, were also studied which clearly reveal the beneficial role of aromatic groups toward improving the toughness of the base cycloaliphatic epoxy resin without compromising on the material stiffness. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39941.     

Decolourisation of leather dye by ozonation

Sewage and industrial effluent treatment plants are installed with primary and secondary biological treatment units to reduce the discharge of pollution load into the environment. These treatment plants normally reduce the organic load in terms of BOD but not the pollution load in terms of inorganic salts (total dissolved solids—TDS) and colour in the effluent. To eliminate the contamination of ground and surface water bodies and to conserve water sources, the regulatory authorities have taken very stringent regulations to implement zero liquid discharge (ZLD) for industrial effluents, i.e., water recovery from wastewater and reuse. It is difficult to recover water from secondary treated wastewater directly, as it does not meet the reverse osmosis feed requirements. In order to achieve the feed requirements, different tertiary treatment methods are being tried. In this study, removal of colour due to residual dyes has been attempted using ozone. The main purpose of this study is to decolourise the dye used in leather processing. Also, the effect of pH and dye concentration on dye decolourisation has been investigated. From the study it has been observed that maximum decolourisation efficiency up to 97% could be achieved for the pH values (4,7, 9 and 11) and dye concentrations (30, 65, 180 and 360 mg/L) studied.     

Structural and Electrical Properties of Ni‐Substituted Mg‐Mn Nanoferrite by Coprecipitation Route

Ni²⁺ ions doped on Mg_0.40Mn_0.60‐xNi_xFe₂O₄ compositions with 0.00 ≤ x ≤ 0.60 have been synthesized by coprecipitation method and taken for the present work to study the dielectric properties and impedance characterization using the XRD and electrical measurements. The X‐ray diffraction and FT‐IR revealed that the ferrite has single‐phase cubic spinel structure. The calculated particle size from XRD data verified using SEM as well as AFM. These photographs show that the ferrites have crystalline size in the range of 20–50 nm. It was observed that the particle size decreased and Ni concentration increased. The dielectric constant and dielectric loss decreased with increase in nonmagnetic Ni²⁺ ions. Electrical properties indicate that synthesized nanoferrite particles have high resistivity.