Romanian River Basins Lag Time Analysis. The SCS-CN Versus RNS Comparative Approach Developed for Small Watersheds

Romanian policy makers have to perceive that human intervention on river basins land cover is influencing rainfall-runoff relation and the used methodology cannot accurately estimate watershed surface flow transformations. Global water cycles and energy fluxes understanding is leading to better predictions of land atmosphere interaction and local hydro-climates evolution. The water transfer time determination from rainfall to runoff needs accurate measurements of river basins hydrological parameters. Here, we analyzed and compared the lag time value results of two different methodologies (curve number and rational methodology) used for 54 Romanian small catchment areas study. The focus of this paper is the lag time evaluation and interpretation for an effective implementation of the best methodology approach in the Romanian geographical space. Our research in small river basins was developed using remote sensing technology maps, GIS and environmental datasets in combination with field work on every drainage basin in order to assess the specific morphological features and validate the land cover typology. We found that Soil Conservation Service - Curve Number (SCS-CN) method is widely used according to USA landscape features classification, but not necessarily applicable to Romanian river basins characteristics. Our results show how the official Romanian rational methodology national standard (RNS) can be improved and the limits of SCS-CN method.

     

Parametric study for the growth of carbon nanotubes by catalytic chemical vapor deposition in a fluidized bed reactor

Multiwalled carbon nanotubes have been produced from H₂-C₂H₄ mixtures on Fe-SiO₂ catalysts by a fluidized bed catalytic chemical vapor deposition process. Various parameters such as the catalyst preparation, the residence time, the run duration, the temperature, the H₂:C₂H₄ ratio, the amount of metal deposited on the support have been examined. The influence of these parameters on the deposited carbon yield is reported, together with observations of the produced material. This process allows an homogeneously distributed deposition of nanotubes (10-20 nm diameter), that remain anchored to the support.     

<Emphasis Type="Italic">In situ</Emphasis> monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

An ultrasonic technique was developed to study the crystallization process of edible fats on-line. A chirp wave was used instead of the conventional pulser signal, thus achieving a higher signal-to-noise ratio. This enabled measurements to be made in concentrated systems [≈20% solid fat content (SFC)] through a 8.11-cm thick sample without significant signal loss. Fat samples were crystallized at 20, 25, and 30°C at a constant agitation rate of 400 rpm for 90 min. The crystallization process was followed by ultrasonic spectroscopy and a low-resolution pulsed nuclear magnetic resonance spectrometer. Specific relationships were found between ultrasonic parameters [integrated response, time of flight (TF), and full width half maximum] and SFC. TF, which is an indirect measurement of the ultrasonic velocity (v), was highly correlated to SFC (r ²>0.9) in a linear fashion (v=2.601 SFC+1433.0).     

Observer-based predictive controller design with network-enhanced time-delay compensation

State feedback control is very attractive due to the precise computation of the gain matrix, but the implementation of a state feedback controller is possible only when all state variables are directly measurable. This condition is almost impossible to accomplish due to the excess number of required sensors or unavailability of states for measurement in most of the practical situations. Hence, the need for an estimator or observer is obvious to estimate all the state variables by observing the input and the output of the controlled system. As such, the goal of this paper is to provide a control design methodology based on a Luenberger observer design that can assure the closed-loop performances of a vehicle drivetrain with backlash, while compensating the network-enhanced time-varying delays. This goal is achieved in a sequential manner: firstly, a piecewise linear model of two inertias drivetrain, which takes into consideration the backlash nonlinearity and the network-enhanced time-varying delay effects is derived; then, a Luenberger observer which estimates the state variables is synthesized and the robust full state-feedback predictive controller based on flexible control Lyapunov functions is designed to explicitly take into account the bounds of the disturbances caused by time-varying delays and to guarantee also the input-to-state stability of the system in a non-conservative way. The full state-feedback predictive control strategy based on the Luenberger observer design was experimentally tested on a vehicle drivetrain emulator controlled through controller area network, with the aim of minimizing the backlash effects while compensating the network-enhanced delays.     

C-Testable modified-Booth multipliers

In this paper the testability of modified-Booth array multipliers for standard cells based design environments is examined for first time. In such cases the structure of the cells may be unknown, thus Cell Fault Model (CFM) is adopted. Two C-testable designs are proposed. A design for an N _x × N_y bits modified-Booth multiplier, which uses ripple carry addition at the last stage of the multiplication, is first proposed. The design requires the addition of only one extra primary input and 38 test vectors with respect to CFM. A second C-testable design is given using carry lookahead addition at the last stage which is the case of practical implementations of modified-Booth multipliers. Such a C-testable design using carry lookahead addition is for first time proposed in the open literature. This second design requires the addition of 4 extra primary inputs. One-level and two-levels carry lookahead adders, are considered. The C-testable design requires 61 test vectors for the former and 73 test vectors for the latter, respectively. The hardware and delay overheads imposed by both C-testable designs are very small and decrease when the size of the multiplier increases.     

Process and learning outcomes from remotely-operated,simulated, and hands-on student laboratories

A large-scale, multi-year, randomized study compared learning activities and outcomes for hands-on, remotely-operated, and simulation-based educational laboratories in an undergraduate engineering course. Students (N = 458) worked in small-group lab teams to perform two experiments involving stress on a cantilever beam. Each team conducted the experiments in one of three lab formats (hands-on, remotely-operated, or simulation-based), collecting data either individually or as a team. Lab format and data-collection mode showed an interaction, such that for the hands-on lab format learning outcomes were higher when the lab team collected data sets working as a group rather than individually collecting data sets to be combined later, while for remotely-operated labs individual data collection was best. The pattern of time spent on various lab-related activities suggests that working with real instead of simulated data may induce higher levels of motivation. The results also suggest that learning with computer-mediated technologies can be improved by careful design and coordination of group and individual activities.     

Plate tectonic reconstructions with continuously closing plates

We present a new algorithm for modeling a self-consistent set of global plate polygons. Each plate polygon is composed of a finite list of plate margins, all with different Euler poles. We introduce a "continuously closed plate" (CCP), such that, as each margin moves independently, the plate polygon remains closed geometrically as a function of time. This method solves emerging needs in computational geodynamics to combine kinematic with dynamic models. Because they have polygons that are too widely spaced in time and have inconsistent motions between margins and plates, traditional global plate tectonic reconstructions have become inadequate for geodynamics. The CCP algorithm has been incorporated into the GPlates open-source paleogeographic system. The algorithm is a set of procedures and data structures that operate on collections of reconstructed geometric data to form closed plate polygons; the main data structures used for each plate polygon are based on a nested hierarchy of topological elements. Reconstructions with CCPs can be created, edited, visualized, and exported with GPlates. The native storage of the dynamic reconstructions is the GPlates Markup Language, GPML, which uses an XML-based file format called GML. We demonstrate the utility of the CCP method by creating a global reconstruction with continuously closing plates from 140 Ma to the present using data from existing, traditional reconstructions.     

Synthesis of poly(urethane-urea) varnish bearing azobenzene chromophoric pendants

A new diol with azoaromatic pendant was prepared by N-phenyl-4-amido-3,4-dichloromaleimide with 2-mercaptoethanol in the presence of NaOH, and used to obtain photosensible poly(urethane-urea) varnish. A poly(urethane-urea) varnish bearing azobenzene chromophores, based on a poly(ethylene adipate)diol (average molecular weight—2000), 4,4′-dibenzyldiisocyanate, diethylene glycol, trimethylolpropane, and afore-mentioned diol, were prepared and characterized. The polymers were characterized by FTIR spectroscopy, thermal analysis (DMA, DSC, and TGA), and the photochromic behavior by UV irradiation of thin films was discussed.